supremo LEISURE Catalan Modular Firepit Dining Table User manual

Before you begin the assembly of your new purchase please read instrucons carefully:
PRODUCT ASSEMBLY
1.Please check all components listed are counted and correspond to the required parts for building the
product (should there be anything missing please contact your retailer or )[e-mail]
2.This Product should be assembled by 2 people.
3.NEVER USE A POWER TOOL TO ASSEMBLE.
4.To ensure your product is not damaged during assembly, prepare a suitable area to build your furniture,
either assemble on a clean soft surface (like a carpet) or use the box the products have been supplied in.
This will prevent your product from damage / scratching to the materials used when building the furniture.
5.To begin the assembly, follow the diagrams in order sequence as directed to ensure the correct method is
followed for correct installation of each component. DO NOT tighten any bolts up until all parts have been
connected loosely with all bolts inserted into position, once all parts are connected, then each bolt can be
fully tightened using the tools provided.
6.Thank you for purchasing a Supremo product and we wish you many years of enjoyment using your garden
furniture.

PVC Bolt Cover
J
K
L
AGlass
1
B1
C1
D
E
Metal Washer
F
Bolts
G
H
Allen Key
I
1
12
16
1
16
Table Top Frame
Bolts
M6X20
M6X35
M
12
3
14
1
N
O
Catalan 150x110cm Modular Firepit Dining Table
J
Fire Pit
Glass Surround
Heat Proof Tape
1. Turn the main fire bowl onto its face edge (up-side down) onto a
soft level surface.
2. Apply the heat proof tape to the 4 outer rim edges of the fire bowl
ensuring the tape is placed level with the outer edges and cut the
tape to the correct length required (ensure the tape does not
overlap each other where the tape can join in the corners).
2Alu Plate to fasten
control panel
1
1
K
4
1
Component List
Please Note: Components L, M & N are supplied
in a separate box
Heat Proof Tape
Heat Proof Tape
Heat Proof Tape
Heat Proof Tape
Boom of Fire Pit Pan
Table Leg with Door
Table Leg
Leg Side Panel
K
J
GK
O
B
C
D
E
F
A
L
M
N
Leg Side Panel with
Control Panel Hole
Attached from inside of leg structure (Via Door
Access) – 4 x Parts G, I, K Required
See Instructions inside original box for Glass surround assembly