Resolution RE606 User manual

RE606_Cryptix-Compat_Tilt_Instructions-Double_Sided 7-Jan- 5
24-Hour Tech Support Line: [phone]
www.ResolutionProducts.com
RE606 Tilt, ryptiX™- ompatible
Features
• Alarm for anything that tilts.
• Useful for hatches, roll-up doors and even moveable assets.
• Cover tamper.
• Strong, reliable RF signal.
• 1 -15 year battery life on CR123A battery.
• Low Battery indication.
• 3.3x1.4x1.1 inches.
Key Instructions
• Battery “+” faces towards spring.
• Normal Mounting position (non-alarm):
 Straight up with battery at bottom, tamper switch at top.
 Mounting upside down will cause over-sensitivity and false
alarms.
Enrollment
• Place panel in enrollment mode.
• Tamper the device.
Operation
• Tilt
Alarm: When tilted more than 45 degrees from mounting position.
Tamper: when cover is opened.
Supervisory: every hour.
Specifications
Tilt Alarm Angle: 45 degrees +/- 15 degrees upwards cone
Tilt Operation Angles: degrees (straight up) to 9 degrees (flat)
Tilt Element Technology: Ball and contacts, non-mercury
Operational Life: 1 , cycles
Mounting hardware: # 4 or #6 screws
Replacement Battery: CR123A 155 mAH
Temperature Range: F to 12 F
Housing dimensions: 3.3x1.4x1.1 inches
Specifications subject to change without notice.
RE606_Cryptix-Compat_Tilt_Instructions-Double_Sided 7-Jan- 5
24-Hour Tech Support Line: [phone]
www.ResolutionProducts.com
RE606 Tilt, ryptiX™- ompatible
Features
• Alarm for anything that tilts.
• Useful for hatches, roll-up doors and even moveable assets.
• Cover tamper.
• Strong, reliable RF signal.
• 1 -15 year battery life on CR123A battery.
• Low Battery indication.
• 3.3x1.4x1.1 inches.
Key Instructions
• Battery “+” faces towards spring.
• Normal Mounting position (non-alarm):
 Straight up with battery at bottom, tamper switch at top.
 Mounting upside down will cause over-sensitivity and false
alarms.
Enrollment
• Place panel in enrollment mode.
• Tamper the device.
Operation
• Tilt
Alarm: When tilted more than 45 degrees from mounting position.
Tamper: when cover is opened.
Supervisory: every hour.
Specifications
Tilt Alarm Angle: 45 degrees +/- 15 degrees upwards cone
Tilt Operation Angles: degrees (straight up) to 9 degrees (flat)
Tilt Element Technology: Ball and contacts, non-mercury
Operational Life: 1 , cycles
Mounting hardware: # 4 or #6 screws
Replacement Battery: CR123A 155 mAH
Temperature Range: F to 12 F
Housing dimensions: 3.3x1.4x1.1 inches
Specifications subject to change without notice.

RE606_Cryptix-Compat_Tilt_Instructions-Double_Sided 7-Jan- 5
24-Hour Tech Support Line: [phone]
www.ResolutionProducts.com
Internal Picture
Shown in straight up, non-alarm mounting position.
Notices
Warranty
Resolution Products, Inc. will replace products that are defective in their first five (5) years.
FCC Notice
his device complies with Part 15 of the FCC rules. Operation is subject to the following two conditions:
his device may not cause harmful interference.
his device must accept any interference that may be received, including interference that may
cause undesired operation.
Changes or modifications not expressly approved by the Resolution Products, Inc. could void the user's
authority to operate this equipment.
FCC ID: U5X-RE301
IC Notice
his device complies with Industry Canada license-exempt RSS standard(s). Operation is
subject to the following two conditions:
(1) his device may not cause interference, and
(2) his device must accept any interference, including interference that may
cause undesired operation of the device.
Le présent appareil est conforme aux CNR d'Industrie Canada applicables aux appareils
radio exempts de licence. L'exploitation est autorisée aux deux conditions suivantes :
(1)l'appareil ne doit pas produire de brouillage, et
(2)l'utilisateur de l'appareil doit accepter tout brouillage radioélectrique subi,
même si le brouillage est susceptible d'en compromettre le fonctionnement.
IC: 8310A-RE301
Tilt Element
Non
-
Alarm
Cone
Non
-
Alarm
Cone
Alarm Cone
Alarm Cone
Tamper Switch
RE606_Cryptix-Compat_Tilt_Instructions-Double_Sided 7-Jan- 5
24-Hour Tech Support Line: [phone]
www.ResolutionProducts.com
Internal Picture
Shown in straight up, non-alarm mounting position.
Notices
Warranty
Resolution Products, Inc. will replace products that are defective in their first five (5) years.
FCC Notice
his device complies with Part 15 of the FCC rules. Operation is subject to the following two conditions:
his device may not cause harmful interference.
his device must accept any interference that may be received, including interference that may
cause undesired operation.
Changes or modifications not expressly approved by the Resolution Products, Inc. could void the user's
authority to operate this equipment.
FCC ID: U5X-RE301
IC Notice
his device complies with Industry Canada license-exempt RSS standard(s). Operation is
subject to the following two conditions:
(1) his device may not cause interference, and
(2) his device must accept any interference, including interference that may
cause undesired operation of the device.
Le présent appareil est conforme aux CNR d'Industrie Canada applicables aux appareils
radio exempts de licence. L'exploitation est autorisée aux deux conditions suivantes :
(1)l'appareil ne doit pas produire de brouillage, et
(2)l'utilisateur de l'appareil doit accepter tout brouillage radioélectrique subi,
même si le brouillage est susceptible d'en compromettre le fonctionnement.
IC: 8310A-RE301
Tilt Element
Non
-
Alarm
Cone
Non
-
Alarm
Cone
Alarm Cone
Alarm Cone
Tamper Switch