Resolution CryptiX RE600-5 User manual

I
N
S
T
A
L
L
G
U
I
D
E
I
RE600-5 CryptiX™Keyfob
Keyfob is a portable device used to remotely control a
security system. The buttons can be congured to arm,
disarm, trigger panic alarms, or control automation
functions.
Features
• Supports 5 buttons
• Low battery indication
• Secure encrypted wireless transmissions
• 2 year warranty
Enroll the Keyfob by placing the Helix panel into wireless
enrollment mode and pressing a keyfob button multiple
times as instructed by the Helix installation manual.
Alternately, the sensor ID located on the back of the fob
can be used to manually enroll the sensor.
Panic alarm can be sent by pressing and holding
“Arm Stay” and “Arm Away” simultaneously.
To replace the battery, remove the screw on the back of
the keyfob and unsnap the back from the cover.
Pro Tips
In CE applications, the keyfob must be used near the
point of exit so that arming can be veried.
LED blinks when a button press is transmitted.
I
N
S
T
A
L
L
G
U
I
D
E
I
Screw
LED
Arm Stay
Arm Away
Aux
Disarm
Lights
Button
Use the Helix installation guide to verify proper system setup.

47-0025-08 • RevA • 2017-08-14
Tech Support Line [phone]
www.ResolutionProducts.com
WARRANTY
Resolution Products, Inc. will replace all non-portable products that
are defective in their rst ve (5) years, and all portable products
that are defective in their rst two (2) years.
IC NOTICE
This device complies with Industry Canada license-exempt RSS
standard(s). Operation is subject to the following two conditions:
(1) This device may not cause interference, and
(2) This device must accept any interference, including interference
that may cause undesired operation of the device.
Le présent appareil est conforme aux cnr d’Industrie Canada
applicables aux appareils radio exempts de licence. L’exploitation
est autorisée aux deux conditions suivantes:
(1) L’appareil ne doit pas produire de brouillage, et
(2) L’utilisateur de l’appareil doit accepter tout brouillage
radioélectrique subi, même si le brouillage est susceptible d’en
compromettre le fonctionnement.
IC: 8310A-RE3005
Specications
Physical
Housing Dimensions
Weight with Battery
2.2 x 1.5 x .6 inches (5.6 x 3.8 x 1.4 centimeters)
0.66 ounces (19 grams)
Environmental
Operating Temperature
Maximum Humidity
32°F to 120°F (0°C to 49°C)
85% non-condensing relative humidity
Sensor Specications
Frequency
Replacement Battery
Nominal Battery Life
Transmitted Indications
433.92 MHz
One Panasonic CR2032
5 Years
Low Battery
Certication
RE600-5 FCC, IC, RCM, EN 60950-1, EN 300 220, EN 301 489, CE
Security Grade 1, CE Environmental Class 2
Specications subject to change without notice
FCC NOTICE
This device complies with Part 15 of the FCC rules. Operation is
subject to the following two conditions:
(1) This device may not cause harmful interference.
(2) This device must accept any interference that may be received,
including interference that may cause undesired operation.
Changes or modications not expressly approved by the Resolution
Products, Inc. could void the user’s authority to operate this
equipment.
FCC ID: U5X-RE300-5
CE DECLARATION OF CONFORMITY
Hereby, Resolution Products, Inc. declares that this RE300 is in
compliance with the essential requirements and other relevant
provisions of directive 1999/5/EC.
(This declaration can be translated to other languages via a myriad
of translation tools found on the Internet.)