Retro-Bit Genesis User manual

FEATURES
• Compatible with original and most third party SEGA
Genesis® and Mega Drive consoles.
• Functional with Retro-Bit® wireless controllers featuring
Bluetooth® Technology.
• Pairs with original PS4®, Xbox One®, and Switch
Bluetooth® controllers.
• Includes a pairing button and Micro USB® port to allow
for firmware updates.
• Contains a 3-button mode option.
• Playable up to 30ft/ 10m in distance.
• Includes 9cm/ 3.5in Micro USB® cable.
CONNECTION
CONNECT WITH OFFICIALLY LICENSED SEGA® CONTROLLER
WITH BLUETOOTH® TECHNOLOGY BY RETRO-BIT®.
• With the controller turned off, press and hold the Home
+ Z buttons to enter pairing mode. LED2 and LED3 will
flash.
• Plug the receiver to the powered console and press the
pairing button until synced.
• Once connected, the controller will vibrate and LED2 and
LED3 will remain on.
• To enable 3-Button mode, press and hold Start + A B C
until the controller vibrates. Repeat this input to return
to 6-button mode.
CONNECT WITH PS4® CONTROLLER
• Press and hold the PS + Share buttons on the controller
to enter pairing mode.
• Plug the receiver to the powered console and press the
pairing button until synced.
• Once connected, the controller’s LED light and the
receiver’s LED will remain on.
CONNECT WITH XBOX ONE® CONTROLLER
• Press the Guide button on the controller to power it on.
• Press the pairing button to enter pairing mode.
• Plug the receiver to the powered console and press the
pairing button until synced.
• Once connected, the controller’s LED light and the
receiver’s LED will remain on.
CONNECT WITH SWITCH PRO CONTROLLER
• Press the Home button the controller to power it on.
• Press the pairing button to enter pairing mode.
• Plug the receiver to the powered console and then press
the pairing button until synced.
• Once connected, the controller’s LED and the receiver’s
LED will remain on.
If you encounter any issues or require further support, visit:
www.retro-bit.com/support
INSTRUCTION MANUALEN
For more information, please visit www.retro-bit.com
@retrobitgaming
Wireless Receiver
Featuring Bluetooth®Technology
INSTRUCTION MANUAL
MANUAL DE INSTRUCCIONES
GUIDE D’UTILISATION
NA
Retro-Bit is a registered trademark of Kool Brands, LLC. SEGA is registered in the U.S.
Patent and Trademark Office. SEGA, the SEGA logo and SEGA Genesis are either registered
trademarks or trademarks of SEGA Holdings Co., Ltd. or its affiliates. PS3 and PS4 are
registered trademarks of Sony Interactive Entertainment Inc. Xbox One is a registered
trademark of Microsoft Corporation. USB is a registered trademark of Universal Serial Bus
Implementers Forum, Inc. Bluetooth & Bluetooth logo are registered trademarks of Bluetooth
SIG, Inc.
All other mentioned trademarks are either trademarks or registered trademarks of their
respective owners. This product is licensed by SEGA of America, Inc.
© 2012 Kool Brands, LLC.
©SEGA

FEATURES
• Compatible with original and most third party SEGA
Genesis® and Mega Drive consoles.
• Functional with Retro-Bit® wireless controllers featuring
Bluetooth® Technology.
• Pairs with original PS4®, Xbox One®, and Switch
Bluetooth® controllers.
• Includes a pairing button and Micro USB® port to allow
for firmware updates.
• Contains a 3-button mode option.
• Playable up to 30ft/ 10m in distance.
• Includes 9cm/ 3.5in Micro USB® cable.
CONNECTION
CONNECT WITH OFFICIALLY LICENSED SEGA® CONTROLLER
WITH BLUETOOTH® TECHNOLOGY BY RETRO-BIT®.
• With the controller turned off, press and hold the Home
+ Z buttons to enter pairing mode. LED2 and LED3 will
flash.
• Plug the receiver to the powered console and press the
pairing button until synced.
• Once connected, the controller will vibrate and LED2 and
LED3 will remain on.
• To enable 3-Button mode, press and hold Start + A B C
until the controller vibrates. Repeat this input to return
to 6-button mode.
CONNECT WITH PS4® CONTROLLER
• Press and hold the PS + Share buttons on the controller
to enter pairing mode.
• Plug the receiver to the powered console and press the
pairing button until synced.
• Once connected, the controller’s LED light and the
receiver’s LED will remain on.
CONNECT WITH XBOX ONE® CONTROLLER
• Press the Guide button on the controller to power it on.
• Press the pairing button to enter pairing mode.
• Plug the receiver to the powered console and press the
pairing button until synced.
• Once connected, the controller’s LED light and the
receiver’s LED will remain on.
CONNECT WITH SWITCH PRO CONTROLLER
• Press the Home button the controller to power it on.
• Press the pairing button to enter pairing mode.
• Plug the receiver to the powered console and then press
the pairing button until synced.
• Once connected, the controller’s LED and the receiver’s
LED will remain on.
If you encounter any issues or require further support, visit:
www.retro-bit.com/support
INSTRUCTION MANUALEN
For more information, please visit www.retro-bit.com
@retrobitgaming
Wireless Receiver
Featuring Bluetooth®Technology
INSTRUCTION MANUAL
MANUAL DE INSTRUCCIONES
GUIDE D’UTILISATION
NA
Retro-Bit is a registered trademark of Kool Brands, LLC. SEGA is registered in the U.S.
Patent and Trademark Office. SEGA, the SEGA logo and SEGA Genesis are either registered
trademarks or trademarks of SEGA Holdings Co., Ltd. or its affiliates. PS3 and PS4 are
registered trademarks of Sony Interactive Entertainment Inc. Xbox One is a registered
trademark of Microsoft Corporation. USB is a registered trademark of Universal Serial Bus
Implementers Forum, Inc. Bluetooth & Bluetooth logo are registered trademarks of Bluetooth
SIG, Inc.
All other mentioned trademarks are either trademarks or registered trademarks of their
respective owners. This product is licensed by SEGA of America, Inc.
© 2012 Kool Brands, LLC.
©SEGA

FEATURES
• Compatible with original and most third party SEGA
Genesis® and Mega Drive consoles.
• Functional with Retro-Bit® wireless controllers featuring
Bluetooth® Technology.
• Pairs with original PS4®, Xbox One®, and Switch
Bluetooth® controllers.
• Includes a pairing button and Micro USB® port to allow
for firmware updates.
• Contains a 3-button mode option.
• Playable up to 30ft/ 10m in distance.
• Includes 9cm/ 3.5in Micro USB® cable.
CONNECTION
CONNECT WITH OFFICIALLY LICENSED SEGA® CONTROLLER
WITH BLUETOOTH® TECHNOLOGY BY RETRO-BIT®.
• With the controller turned off, press and hold the Home
+ Z buttons to enter pairing mode. LED2 and LED3 will
flash.
• Plug the receiver to the powered console and press the
pairing button until synced.
• Once connected, the controller will vibrate and LED2 and
LED3 will remain on.
• To enable 3-Button mode, press and hold Start + A B C
until the controller vibrates. Repeat this input to return
to 6-button mode.
CONNECT WITH PS4® CONTROLLER
• Press and hold the PS + Share buttons on the controller
to enter pairing mode.
• Plug the receiver to the powered console and press the
pairing button until synced.
• Once connected, the controller’s LED light and the
receiver’s LED will remain on.
CONNECT WITH XBOX ONE® CONTROLLER
• Press the Guide button on the controller to power it on.
• Press the pairing button to enter pairing mode.
• Plug the receiver to the powered console and press the
pairing button until synced.
• Once connected, the controller’s LED light and the
receiver’s LED will remain on.
CONNECT WITH SWITCH PRO CONTROLLER
• Press the Home button the controller to power it on.
• Press the pairing button to enter pairing mode.
• Plug the receiver to the powered console and then press
the pairing button until synced.
• Once connected, the controller’s LED and the receiver’s
LED will remain on.
If you encounter any issues or require further support, visit:
www.retro-bit.com/support
INSTRUCTION MANUALEN
For more information, please visit www.retro-bit.com
@retrobitgaming
Wireless Receiver
Featuring Bluetooth®Technology
INSTRUCTION MANUAL
MANUAL DE INSTRUCCIONES
GUIDE D’UTILISATION
NA
Retro-Bit is a registered trademark of Kool Brands, LLC. SEGA is registered in the U.S.
Patent and Trademark Office. SEGA, the SEGA logo and SEGA Genesis are either registered
trademarks or trademarks of SEGA Holdings Co., Ltd. or its affiliates. PS3 and PS4 are
registered trademarks of Sony Interactive Entertainment Inc. Xbox One is a registered
trademark of Microsoft Corporation. USB is a registered trademark of Universal Serial Bus
Implementers Forum, Inc. Bluetooth & Bluetooth logo are registered trademarks of Bluetooth
SIG, Inc.
All other mentioned trademarks are either trademarks or registered trademarks of their
respective owners. This product is licensed by SEGA of America, Inc.
© 2012 Kool Brands, LLC.
©SEGA

FEATURES
• Compatible with original and most third party SEGA
Genesis® and Mega Drive consoles.
• Functional with Retro-Bit® wireless controllers featuring
Bluetooth® Technology.
• Pairs with original PS4®, Xbox One®, and Switch
Bluetooth® controllers.
• Includes a pairing button and Micro USB® port to allow
for firmware updates.
• Contains a 3-button mode option.
• Playable up to 30ft/ 10m in distance.
• Includes 9cm/ 3.5in Micro USB® cable.
CONNECTION
CONNECT WITH OFFICIALLY LICENSED SEGA® CONTROLLER
WITH BLUETOOTH® TECHNOLOGY BY RETRO-BIT®.
• With the controller turned off, press and hold the Home
+ Z buttons to enter pairing mode. LED2 and LED3 will
flash.
• Plug the receiver to the powered console and press the
pairing button until synced.
• Once connected, the controller will vibrate and LED2 and
LED3 will remain on.
• To enable 3-Button mode, press and hold Start + A B C
until the controller vibrates. Repeat this input to return
to 6-button mode.
CONNECT WITH PS4® CONTROLLER
• Press and hold the PS + Share buttons on the controller
to enter pairing mode.
• Plug the receiver to the powered console and press the
pairing button until synced.
• Once connected, the controller’s LED light and the
receiver’s LED will remain on.
CONNECT WITH XBOX ONE® CONTROLLER
• Press the Guide button on the controller to power it on.
• Press the pairing button to enter pairing mode.
• Plug the receiver to the powered console and press the
pairing button until synced.
• Once connected, the controller’s LED light and the
receiver’s LED will remain on.
CONNECT WITH SWITCH PRO CONTROLLER
• Press the Home button the controller to power it on.
• Press the pairing button to enter pairing mode.
• Plug the receiver to the powered console and then press
the pairing button until synced.
• Once connected, the controller’s LED and the receiver’s
LED will remain on.
If you encounter any issues or require further support, visit:
www.retro-bit.com/support
INSTRUCTION MANUALEN
For more information, please visit www.retro-bit.com
@retrobitgaming
Wireless Receiver
Featuring Bluetooth®Technology
INSTRUCTION MANUAL
MANUAL DE INSTRUCCIONES
GUIDE D’UTILISATION
NA
Retro-Bit is a registered trademark of Kool Brands, LLC. SEGA is registered in the U.S.
Patent and Trademark Office. SEGA, the SEGA logo and SEGA Genesis are either registered
trademarks or trademarks of SEGA Holdings Co., Ltd. or its affiliates. PS3 and PS4 are
registered trademarks of Sony Interactive Entertainment Inc. Xbox One is a registered
trademark of Microsoft Corporation. USB is a registered trademark of Universal Serial Bus
Implementers Forum, Inc. Bluetooth & Bluetooth logo are registered trademarks of Bluetooth
SIG, Inc.
All other mentioned trademarks are either trademarks or registered trademarks of their
respective owners. This product is licensed by SEGA of America, Inc.
© 2012 Kool Brands, LLC.
©SEGA