RetroSound R-TB8 User manual

MODERN SOUND FOR YOUR CLASSIC
User Manual
The information enclosed in this user manual is intended to provide a general outline to assist you during
the process of installation. This guide does not cover every installation possibility, vehicle, or aspect of the
installation process.
Retro Manufacturing, LLC, or its subsidiaries assume no responsibility for proper or improper installation.
Every attempt has been made to make this installation guide as informative as possible. This guide may
be updated from time to time, and specications are subject to change without notice. Please check our
website (www.retromanufacturing.com) for the latest updates.
R-TB8
Full-Range Speaker System

2
help.retromanufacturing.com
Specifications
Installation
The two R-TB8 Full-Range Speaker Boxes are a mirror image of each other, one
for the passenger's side and one for the driver's side. Each enclosure contains an
8" subwoofer, soft-dome tweeter, and connecting terminal.
Dimensions...................................................16.25"W x 13.5"H x 3.75"D1 x 7.5"D2
Dimensions (Subwoofer) ......................................................................................8"
Weight .......................................................................................... 11.15 LBS (each)
Frequency Response .......................................................................... 60-22,00 Hz
Power Handling ...............................................................................175 watts RMS
Impedence................................................................................................... 4 ohms
Sensitivity .......................................................................................................92 dB
NOTE: All specifications are subject to change without notice.
Securely mount the enclosures in your vehicle to avoid damage or injury. Before
mounting the enclosures, make sure the speaker ports and soft-dome tweeters are
not obstructed and the speaker terminals are accessible. The speaker terminals
are designed to accept speaker wire by pushing the terminal inward and inserting
the wire. Connect the positive speaker wire to the positive (red) speaker terminal.
Connect the negative speaker wire to the negative (black) speaker terminal.
Speaker Port Speaker Port
Soft-dome TweeterSoft-dome Tweeter
Speaker
Terminal
(+) positive (red) speaker terminal(-) negative (black) speaker terminal
Speaker
Terminal
LEFT
RIGHT

3
[email protected]
Limited Warranty
Your unit comes with a manufacturer's warranty covering any defects in materials and
workmanship. Retro Manufacturing, LLC (collectively referred to as "the warranter"), at its
option, will either (a) repair your unit with new or refurbished parts or (b) replace it with a
new or refurbished unit. The warranty period starts from the original purchase date and is
valid for the length of time indicated in the chart below. The decision to repair or replace
will be made by the warranter.
ITEMITEM WARRANTYWARRANTY
R-TB8 One (1) Year
During the "Parts" warranty period, there will be no charge for parts. You must mail in your
unit during the warranty period at your expense. This warranty only applies to products
purchased directly from Retro Manufacturing or an authorized dealer. This warranty
is extended only to the original purchaser of a new product that was not sold "as is."
A purchase receipt or other proof of the original purchase date is required for warranty
service.
To handle a warranty issue, contact us at [e-mail] or 888.325.1555
for a Return Authorization (RA) number. A RA number must accompany all returns and
warranty issues. Any product received without a RA number will be refused.
LIMITED WARRANTY-LIMITS AND EXCLUSIONS
This warranty ONLY COVERS failures due to defects in materials and workmanship and
DOES NOT COVER normal wear and tear or cosmetic damage. The warranty ALSO
DOES NOT COVER damages that occurred during shipment, failures which are caused
by products not supplied by the warranter, failures that result from accident, misuse,
abuse, neglect, bug infestation, mishandling, misapplication, alteration, faulty installation,
set-up adjustment, maladjustment of consumer control, improper maintenance,
improper antenna, inadequate signal reception or pickup, power line surge, improper
voltage supply, lightning, modification, commercial use (such as use in hotels, offices,
restaurants, or other business uses) or rental use of the product, or service by anyone
other than Retro Manufacturing, LLC, or damage that is attributable to acts of God.
THERE ARE NO EXPRESS WARRANTIES EXCEPT AS LISTED UNDER
LIMITED WARRANTY. THE WARRANTER IS NOT LIABLE FOR INCIDENTAL
OR CONSEQUENTIAL DAMAGES RESULTING FROM THE USE OF THIS UNIT
OR ARISING OUT OF ANY BREACH OF THIS WARRANTY. (As examples, this
excludes damages for lost time, the cost of having someone remove or re-install an
installed unit if applicable, travel to and from the servicer, and loss of media, data, or
other memory contents. The items listed are not exclusive but are for illustration only.)
ALL EXPRESS AND IMPLIED WARRANTIES, INCLUDING THE WARRANTY OF
MERCHANTABILITY, ARE LIMITED TO THE PERIOD OF THE LIMITED WARRANTY.
Some states do not allow the exclusion or limitation of incidental or consequential damages
or limitations on how long an implied warranty lasts, so the exclusions may not apply to
you. This warranty gives you specific legal rights, and you may also have other rights which
vary from state to state. If a problem with this unit develops during or after the warranty
period, you may contact your dealer or Retro Manufacturing, LLC.

Published: 06/21/21 | ©2021 Retro Manufacturing, LLC
help.retromanufacturing.com
MODERN SOUND FOR YOUR CLASSIC
7470 Commercial Way | Henderson, NV 89011
www.retromanufacturing.com
RETROMANUFACTURING