Rexing H6 User manual
User Manual
Overview
Thank you for choosing REXING! We hope you love your new
products as much as we do.
If you need assistance, or have any suggestions to improve
it, please contact us. You can reach us via
Our support team will respond you as soon as possible.
Always a surprise in Rexing. Check us out here.
https://www.facebook.com/rexingusa/
https://www.instagram.com/rexingdashcam/
https://www.rexingusa.com/support/registration/
Facebook
Instagram
Site
Product Support
Contents
English.........................................1-20
Deutsch......................................21-44
Italian..........................................45-66
Español.......................................67-88
Français....................................89-111
日本語 ....................................112-132
1
Introduction
Congratulations on the purchase of your new device. You
have selected a high-quality product. The operating
instruction is one constituent of this product. It contains
important information about safety, use and disposal.
Before using the product, familiarise yourself with all
operating and safety instructions. Use this product only as
described and only for the specified areas of application.
Copyright
This documentation is subject to copyright protection.
Any copying or reproduction, including extracts thereof, and
the reproduction of images (even in a modified state), is only
permitted with the written authorisation of the manufacturer.
Intended Use
This device is intended only for recording digital photos and
videos, particularly for observing wildlife. It is not intended for
any other use or for uses extending beyond those stated. This
device is notintended for use in commercial or industrial
environments.
2
The manufacturer accepts no responsibility for damage
caused by failure to observe these instructions, improper
use, incompetent repairs, making unauthorised.
modifications or for using unapproved replacement parts.
The operator alone bears liability.
When the equipment will be placed in the outdoor filming,
rapid changes in the weather could lead to error record.
Safety
Please read below safety precautions carefully before using
the camera.
· Do not try to disassemble the product case. Only
authorized technician can repair the product.
· The camera will be hot after using for too long time. This is
normal.
· Please use the accessory provided by our factory.
3
Parts Of The Camera
1.Display Screen
2.Up/Video Button
3.Shot Button
4.Right Button
5.OK Button
6.Speaker
7.Menu Button
8.Left Button
9.Playback Button
10.Down/Photo Button
11.Micro SD Card Slot
12.AV Jack
13.USB Jack
14.OFF-TEST-ON
Mode Button
15.Infrared LEDs
16.Day Camera
17.Front Motion Sensor
18.Side Motion Sensor
19.Status Indicator
20.Night Camera
4
Power Supply
Please install batteries before using the camera.
♦ Open the camera case and remove the battery cover.
Install 8 pieces of 1.5V AA brand batteries. Please make
sure the electrode is correct.
♦ If the camera is in low power, please connect the camera
to a power adapter(not provide) for power supply.
Inserting Storage Media
Please prepare a Micro SD card and insert it into the
camera for saving more files. Before recording, please
format the memory card first.
♦ Support Micro SD card, up to 512GB. Suggest to use at
least class 6 or above high speed card.
♦ To avoid mal function, the memory card should be far away
water, strong vibration, dust, hot source and direct sunlight.
♦ Do not insert the memory card forcibly. Please refer to the
marking on the camera.
♦ For the first time use, please wait for the memory card
temperature reach the ambient temperature. The camera
will be short-circuit influenced by environment temperature
5
and humidity. Please notice protection for the camera when
using it outdoor.
♦ If the capacity of memory card is full, the camera will stop
recording automatically and the LEDs will go out.
♦ Press the edge of the card gently to pop-up the TF card.
Basic Operation
Turn On And Off The Camera
Switch the Mode Button to “Test/On” to turn on the camera.
Switch the Mode Button to “Off” to turn off the camera.
System Setup
Switch Mode Button to “Test”, then you can set the system
parameters.
1. Press Video/Photo button to switch between these two
modes.
2. Press Menu button to open the setup menu.
3. Press Up/Down button to scan all menu. Then press OK
button to enter the options interface.
4. Press Up/Down button to scan all options. And press OK
button to confirm options.
6
5. Press Menu button again to turn back to last menu or exit
the setup menu.
Setup menu and functions are as below:
Mode
Set the working mode. In capture mode, the camera just
take pictures. In Video mode, the camera just record video.
In capture&video mode, the camera will take a photo first,
then start to record video.
Options：【Photo】/【Video】/【Photo&Video】.
Day Photo Resolution
Set the still image resolution.
Options：【20MP(5200x3900P)】/【16MP(4608x3456P)】
/【12MP(4000x3000P)】/【8MP(3264x2448P)】/【
5MP(2592x1944P)】/【3MP(2048x1536P)】/【
1MP(1280x960P)】.
Night Photo Resolution
Set the still image resolution.
Options：【(1920x1080P)】/【1280x720P)】/【640x480P)
】.
7
Photo Series
Set the photo number of continuous shooting. In photo
mode, the camera will take photos continuously.
Options：【1 photo】/【2 photos in series】/【3 photos in
series】/【10 photos in series】.
Day Video Resolution
Set the video resolution. The bigger the resolution is ,the
longer the video time can be stored.
Options：【3840x2160P】/【2688x1520P】/【
1920x1080P】/【1280x720P】/【1280x720P 60FPS】/【
848x480P】/【720x480P】/【640x480P】/【320x240P】.
Night Video Resolution
Set the video resolution. The bigger the resolution is, the
longer the video time can be stored.
Options：【1920x1080P】/【1280x720P】/【640x480P】.
Day TL Video Resolution
Set the resolution of time lapse video.
8
Options:【5200x3900P】/【4608x3456P】/【4416x3312P
】/【4000x3000P】/【3648x2736P】/【3264x2448P】/【
3072x2304P】/【2592x1944P】/【2048x1536P】.
Night TL Video Resolution
Set the resolution of time lapse video.
Options:【1920x1080P】/【1280x720P】.
Video Length
Set the duration of recording a video clip. The shortest time
is 3 seconds and the longest time is 10 minutes.
Options：3 seconds~10 minutes.
Audio Recording
Open this function, the camera will record audio when
recording video.
Options：【On】/【Off】.
Shot Lag
Set the time of delay shooting when the camera detects the
motion. Within the selected time, the camera will not record
any image or video. It can avoid to store too much same
events and save more capacity.
Options：5 seconds~60 minutes.
9
Side Motion Sensors
Open/close the side motion sensors.
Options:【On】/【Off】.
Sensitivity Motion Sensors
Set the sensitivity of the sensors. Environmental impact is
small indoors, you can choose “Low”. In outdoor, choose
“Middle”in normal condition. Choose “High”if the
environment impact is huge outdoors. The temperature can
also influence the sensor sensitivity. “High Sensitivity”
applies to mild environment. ”Low Sensitivity ”applies to
cold environment.
Options：【Low】/【Middle】/【High】.
Target Recording Time
Set the target recording
time. As shown in below
picture, you can set the start
and stop time. The camera
will work just in the stated
time slot. In other time, the
camera will keep in standby
state.
Options：【On】/【Off】.
Set
Target recording time
Start
： Stop：
Hr
：Min Hr：Min
00
00 00 00
MENU Back OK Select
10
Time Lapse
In Time lapse menu, there are three options as below.
[Normal]: The camera will
take pictures automatically
as per set time interval. For
example, set the interval
time to 1 hour, the camera
will take a photo each hour.
If you want to observe that a
plant blooms, the camera will take 24 photos in 24 hours to
record the whole process of blooming.
[TL Video]: You can set the interval time. The time range is
from 1 second to 24 hours. For example, set the interval to 1
hour, the camera will take a photo each hour. If the camera
works for 24 hours, there will be 24 photos. These photos
will be converted into a video.
[Off]: Close the time lapse function.
Language
Set the language display on screen.
Options：【English】/【Deutsch】/【Dansk】/【Suomi】/
【Svenska】【español】/【French】/【Italian】/
Settings
Set time lapse
Hr：Min ：Sec
00 00 30
Notification:Motion
sensors deactivated
MENU Back OK Select
11
【Nederlands】/【Portuguese】/【Simplified Chinese】/
【Traditional Chinese】/【Japanese】.
Endless Capture
Set the camera to record video in loop, it will loop shooting,
the earliest document will be deleted when the card is nearly
full, infinite loop.
Options：【On】/【Off】.
Time & Date
Set the date and time of camera.
The date format: dd/mm/yyyy, yyyy/mm/dd，mm/dd/yyyy.
The time format: 24h，12h.
Press Left/Right button to choose the item. Press Up/Down
button to adjust the value. And press OK button to confirm.
Options：【Set time&date】/【Time format】/【Date
format】.
Photo Stamp
Stamp the date&time on the photos or not.
Options：【Time&date】/【Date】/【Off】.
Password Protection
Set the power-on password of the camera. The password is
four digits, each digit ranges from 0 to 9 or A to Z.
12
If you forget the password, please reset the camera. Then
all parameters will reset to the factory settings re-flash.
Options：【On】/【Off】.
Beep Sound
Open/close the button sound.
Options：【On】/【Off】.
Format Memory Card
Formatting the memory card will delete all data permanently.
Before using a new memory card or a card that has been
used in another device previously, please format the
memory card.
Options：【Yes】/【No】.
Serial NO.
Set the unique serial number for the camera. The number is
four digits，each digit ranges from 0 to 9 or A to Z.
Options：【On】/【Off】.
Reset Settings
Restore the camera to factory default settings including
password, serial number and so on. All settings will be
deleted.
Options：【Yes】/【No】.
Version
13
Look up the Firmware information of the camera.
Take Photos, Record Video, Playback
Switch the Mode Button to “Test”. (if the camera is turned on
in a bright environment, the day camera will be turned on; if
the camera is turned on in a dark environment, the night
camera will be turned on). In this mode, you can take
photos, record video and playback files manually.
♦ Take Photos ：Press Photo button to switch to photo
mode. Press Shot button to take a picture.
♦ Record Video：Press Video button to switch to video
mode.Press Shot button to start to record a video clip. Press
Shot button again to stop recording.
♦ Playback：Press Playback button to enter the playback
interface. Press Up/Down button to scan photos or video.
When playback video, press OK button to play the video.
Press OK button again to have a pause. Press Menu button
to stop playback. Press Playback button again to exit the
playback mode.
Playback Menu：
1）Delete current file：Delete the current photo or video.
Options：【Cancel】/【Delete】.
14
2）Delete all files：Delete all photo and video files in the
memory card. Options：【Cancel】/【Delete】.
3）Activate slide show：Playback the photos in slide way.
Each photo display 3 seconds. Press OK button to stop
playing.
4）Write protect：Lock the file. It can avoid accident
deletion. Options：【Write-protect current file】/【Write-
protect all files】/【Unlock current file】/【Unlock all files】.
Aligning the camera
In test mode you can adjust the optimum exposure angle and
the range of the motion sensors. During alignment, consider
whether the use of the side motion sensors may be useful for
attaining the desired observation results. You can
activate/deactivate the side motion sensors using the above-
described menu.
Please adjust the camera as follows:
1. Fasten the camera to a tree or similar object at a height of
1–2 meters and align the camera in the desired direction.
Then move slowly from one side of the target area to the other
side. While doing this, monitor the motion display.
2. If this light turns green, you are detected by one of the
activated side motion sensors. If lights turn red, you are
15
detected by the front motion sensor. By this way, you can
align the camera to the best angle and distance.
Working Mode
Switch the Mode Button to “On”. After turn on the camera,
the screen will display 15 seconds countdown. Then the
LEDs and screen will go out. The camera begins to operate
independently and enter standby mode.
If the wild animals enter the detection range of the motion
sensors, the camera will be activated and detect the motion
trail.
If the wild animals continue to move to the detection zone of
the sensor, The camera will be activated immediately, and
according to the working mode set in the menu, take photo
or video or take photo + video, after shooting, the camera
will return to standby mode; the camera will delay the
interval according to the motion sensing set in the menu
Time, waiting for the next sensor trigger and shooting.
Day mode
In the daytime or in a brighter environment, the camera
automatically turns on the daytime camera to shoot high-
resolution color images with normal brightness during the
day.
16
Night Mode
At night or in a dark environment, the camera automatically
turns on the night camera, and infrared LEDs will turn on
automatically to provide necessary light for taking pictures.
This makes it is possible to taking picture at a distance
about 3m to 20m without overexposing the at night.
However, reflective objects such as traffic signs can cause
overexposure if they are located within the recording range.
In night mode, the pictures just can display white and black
but it can shoot high-brightness, high-definition, low-noise
images in a dark environment at night..
When record a video for long time in the evening, the low
voltage may have a great influence on the stability of the
machine. Do not record video with low voltage in the
evening.
Using the wall bracket
You can mount the camera permanently on a wall or tree
using the supplied wall bracket. Before mounting the wall
bracket you should ensure that all existing screws are
tight.The best installation height distance from the ground
about 1 meter.
Table of contents
Languages:
Other Rexing Scouting Camera manuals
