RH SPEAKMAN ICON 8 JET User manual

INSTALLATION INSTRUCTIONS
ICON 8 JET SHOWERHEAD
2360-006 (POLISHED CHROME FINISH)
2360-0007 (BRUSHED NICKEL FINISH)
2360-0008 (POLISHED NICKEL FINISH)
2360-0022 (OIL RUBBED BRONZE FINISH)
MODELS:
92-2963-R2
21
16
"
52mm
13
16
"
21mm
45.00°
7"
178mm
15
8
"
42mm
1/2" NPT THREADS
BOTH ENDS
INLET
51
8
"
129mm
43
4
"
120mm
35
8
"
91mm
FEATURES AND BENEFITS
•Solid, non-corrosive, drop-forged brass
•Extra-thick, high-micron plating ensures a long-lasting finish
•Contoured spray adjusting side handle for precise control
•Stream adjustability with 64 spray stream options
•16" Full body spray pattern
•Self-cleaning lexan deposit-resisting spray jets
•Includes showerhead, arm and flange
•Flow control valve and diverter sold separately
•Meets plumbing codes ASME/ANSI A112.18.1, CSA International B125, and IAPMO/UPC
•Low flow showerhead contains patented plungers to produce powerful spray
performance and is WaterSense certified (2.0 GPM)
SPECIFICATIONS
CARE AND CLEANING
The lustrous finish on your Restoration Hardware Bathware fixture should be treated
with care. Improper handling or cleaning can damage the surface of any metal finish.
Use a soft cloth to wipe clean. Avoid harsh abrasive cleaner. Water contains lime and
other mineral deposits that will be left on the surface after the water has evaporated.
You can prevent these deposits from forming by always wiping the fixture dry
immediately after use.
TECHNICAL SUPPORT AND CUSTOMER SERVICE
For technical support in the installation of your Restoration Hardware Bathware
fixture, please call 1-800-537-2107 weekdays between the hours of 7:00am and
4:00pm PST. For other questions regarding your order, to order additional compo-
nents of the Restoration Hardware Bathware Collection, to order replacement parts, or
to address warranty issues, please contact Restoration Hardware Customer Service at
1-877-747-4671.
Inlet: 1/2” NPT FEMALE Supply Inlet: 1/2" NPT MALE
Outlet: 1/2" NPT MALE

INSTALLATION:
TOOLS AND SUPPLIES
Thread Seal Tape
(included)
Adjustable Wrench
1Place the Escutcheon Plate (1) on
a flat surface. Push the long end
of the Shower Arm (2) down into
the plate. This will help the teeth
of the plate slide over the arm
easier.
2Once the Escutcheon Plate (1) is
on the shower arm, slide the plate
over the Shower Arm (2).
3Apply Teflon Tape to inlet side of
Shower Arm (2). Thread Shower
Arm (2) into Female Pipe Fitting
within the wall. Firmly tighten, and
make sure Shower Arm (2) Outlet is
pointing in a downward position.
4Position Escutcheon Plate (1) flat
against wall.
5Apply Teflon Tape to the outlet
side of shower arm in a clockwise
direction.
6Thread Showerhead onto shower
arm by turning it in a clockwise
direction. Tighten with adjustable
wrench. Turn water supply on and
check for leaks.
7
Adjust spray pattern by rotating side
handle to preferred Anystream®
position.