RHINO COFFEE GEAR RWHANDGRINDER User manual

rhinocoeegear.com
The Rhino® Coee Gear Hand
Grinder is perfect for grinding
coee on-the-go for home,
work, and travel.
AeroPress® is a registered trademark of
Aerobie, Inc. Palo Alto, CA, USA.
Replace lid securely on grinding
chamber.
Remove the grinder and parts
from the box.
Measure the desired amount of
beans and pour into the
grinding chamber.
Adjust the grind by turning the
adjustment nut clockwise for
ner and anti-clockwise
for coarser.
Secure handle to the top nut
and begin grinding, making
sure to keep the handle level.
using the Aeropress®
adapter (RWSHGA only)
Remove the bottom grinds
chamber and replace with
the Aeropress® adapter.
Attach to the Aeropress®.
Grind away.
how to use
your grinder
3
4
5
thanks for
your purchase
1
2
3
2
1

Tall Hand Grinder
3
4
5
2
1
Unscrew the
adjustment
nut on the
bottom of
the grind
chamber.
Remove
the inner
ceramic burr.
Tip the
grinder
upside down
to remove
the outer
burr.
Wash all parts
with warm,
soapy water
and leave
to dry.
Once dry,
follow the
reassembly
instructions.
cleaning your
grinder
3
4
2
Insert the
spring onto
the middle
pin of the
grinding
mechanism.
Insert the
outer burr.
The small
teeth on the
burr are
to face
upwards.
Insert the
inner burr so
it ts nicely
into the
outer burr.
Push the
inner burr
down slightly,
engaging the
inner spring.
Replace the
adjustment
nut, with the
at side
facing up.
Turn
clockwise
to tighten.
reassembling your
grinder
5
1