Rhino Motion EVO User manual

ATTACHING MOTION
Back out the accessory studs

ATTACHING MOTION
Place the motor on the drive sha press down to compress the o-ring (if motor
doesn’t drop in place, move the carriage slightly to align the shas) Tighten the
accessory studs to lock the motor in place

PLUG IN MOTOR
Align cable on the controller and plug in connector. For added security,
fasten the retention screw to the controller

PREPARE FOR SHOOTING
Unlock carriage brake and you’re ready to start lming.
Note: Rhino Moon will not work if the brake is locked in place

POWER ON CONTROLLER
Press and hold the power buon to turn on the Controller

BASIC FUNCTIONS
Push in the Controller wheel to select menu items and change values.
Use the back buon to go back and exit menus

SELECT YOUR SLIDER
Choose the slider you are installing Rhino Moon on. Note: when changing
sliders or rail lengths it is important to change your slider in sengs