RHINO EVO User manual

3 Setups
Manual, Flywheel, Motion

MANUAL
If you use Rhino Slider EVO without Flywheel or Moon, remove the belt for a
smoother slide

FLYWHEEL
For manual shots, use the ywheel for an ultra- smooth slide

ATTACHING FLYWHEEL
Remove the rubber o-ring (used for Rhino Moon)

ATTACHING FLYWHEEL
Place the Flywheel on the drive sha

ATTACHING FLYWHEEL
Tighten down the set-screw to lock Flywheel in place

MOTION
Use Moon for responsive and precise control of your slider
(refer to Moon Quick Start Guide for detailed explanaon)

SETUP YOUR SLIDER
You can either use the built in all-terrain legs or mount it to a tripod

SETUP YOUR SLIDER
You can either use the built in all-terrain legs or mount it to a tripod
MOUNT YOUR CAMERA
Mount a at based ⅜-16 ball or uid head to the carriage and then mount
your camera

PREPARE FOR SHOOTING
Unlock carriage brake and you’re ready to start lming.
Note: When using Rhino Moon, it’s especially important to make sure it’s unlocked
STORAGE
To keep your slider safe during travel and between shoots, use Rhino Armor
carrying cases to protect slider

PREPARE FOR SHOOTING
Unlock carriage brake and you’re ready to start lming.
Note: When using Rhino Moon, it’s especially important to make sure it’s unlocked
STORAGE
To keep your slider safe during travel and between shoots, use Rhino Armor
carrying cases to protect slider

MAINTENANCE AND CLEANING
To keep your Rhino Slider running smooth, keeping your rails and rollers clean is
important

MAINTENANCE AND CLEANING
If you get excess amounts of debris built up you can easily clean your slider by
removing the carriage and wiping o you rollers and rails with a clean cloth

Thank You for purchasing Rhino Slider EVO.
If you have any questions or comments, please email:
[email protected]