Richmat HJH8B User manual

HJH8B User’s Manual HJH12 User’s Manual
Head up
Foot up
Head and foot up
Torch
Head down
Foot down
Head and foot down
Head down
Foot down
Head and foot down
Head and foot up
Foot up
Head up

HJH13 User’s Manual HJH26 User’s Manual
1.0 Functions
Head down
Foot down
Foot up
Head up
Flat
Torch
Memory

1.1 Actuator functions
Number
Functions
a
Press button and release, head move to up
position, foot move to down position
b
Press button and release, foot move to up
position, head move to down position
c
Press button and release, head and foot move
to up position
d
Head up
e
Head down
f
Foot up
g
Foot down
h
Memorize position
i
Reset
j
Recall memorized position
1.2 Massage functions
number
functions
k
Increase intensity, reach highest intensity
when hear beep
l
Decrease intensity, reach lowest intensity
when hear beep
m
Increase speed, reach fastest speed when hear
beep
n
Decrease speed, reach slowest speed when hear
beep
o
On/off massage 1
p
On/off massage 2
q
Pulse mode
r
Wave mode
s
Consistent mode
1.3 Other functions
number
Functions
t
Torch
u
Night light

1.4 Coding function
Number
Function
d+f
Press d+f button together, and press coding
button simultaneously, when hear beep
sound(when coding) or indicator flash(when
coding), coding finish.
HJH29 User’s Manual
Functions
Number
Functions
a
TV
b
Lounge
c
Zero Gravity
d
Flat
e
Increase vibration
f
Decrease vibration
g
Vibration on/off
h
Up
i
Down
j
Torch
k
Night light
l
Foot part
m
Switch
n
Head part

HJH37 User’s Manual HJH39 User’s Manual
Head down
Foot down
Head and foot down
Head and foot up
Foot up
Head up
Head down
Foot down
Head and foot down
Head and foot up
Foot up
Head up
Night light
Torch

HJH51 User’s Manul HJH55 User’s Manul
Head down
Foot down
Head and foot down
Head and foot
up
Foot up
Head up

Functions
Number
Functions
a
TV
b
Lounge
c
Zero Gravity
d
Head up
e
Head down
f
Foot up
g
Foot down
h
Lumbar up
i
Lumbar down
j
Memory position 1
k
Memory position 2
l
Flat
m
Timer off
n
Increase vibration
O
Timer on
P
Decrease vibration
q
Night light
r
Torch

Caution:
This device complies with Part 15 of the FCC Rules. Operation is subject to
the following two conditions: (1) this device may not cause harmful
interference, and (2) this device must accept any interference received,
including interference that may cause undesired operation.
Changes or modifications not expressly approved by the party responsible
for compliance could void the user's authority to operate the equipment.
This equipment has been tested and found to comply with the limits for a
Class B digital device, pursuant to part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference in
a residential installation. This equipment generates uses and can radiate
radio frequency energy and, if not installed and used in accordance with
the instructions, may cause harmful interference to radio communications.
However, there is no guarantee that interference will not occur in a
particular installation. If this equipment does cause harmful interference to
radio or television reception, which can be determined by turning the
equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures:
—Reorient or relocate the receiving antenna.
—Increase the separation between the equipment and receiver.
—Connect the equipment into an outlet on a circuit different from that to
which the receiver is connected.
—Consult the dealer or an experienced radio/TV technician for help.
Information for the OEM Integrators
This device is intended for OEM integrators only. Please see the full grant
of equipment document for restrictions.
Label Information to the End User by the OEM or Integrators
If the FCC ID of this module is not visible when it is installed inside another
device, then the outside of the device into which the module is installed
must be label with
“Contains FCC ID: 2AITPHJC0”