Ricoh Smart Operation Panel User manual

Ricoh
Smart Device
Connector
Smart Operation Panel
Requirements

! How to identify updated Smart Operation
Panel – see image below.
󲻙 The current version Smart Operation Panels
(G1.0 ) have been updated at the factory.
󲻙 Updated Smart Operation Panels can be
identified by a yellow dot on the EDP label.
Note: If you receive SOP version G1.0 you must
update the Operating System.
(See page 4 for details)
Smart Operation Panel G1.5
2

! One NFC tag is included with the Smart
Operation Panel - see image of packaging
below.
Image of Smart Operation Panel G1.5 with NFC tag packaging
! Affix the NFC tag to the following position
on the Smart Operation Panel.
3
Smart Operation Panel G1.5

! You can verify current firmware versions
installed on the Smart Operation Panel by
selecting “Screen Features” "“Screen
Device Settings Information” "“Software
Version List”.
Notes:
󲻙 You will need to scroll the page down to see all
modules firmware levels.
󲻙 You will need login as admin if machine
administrator authentication is enabled.
Smart Operation Panel G1.5
4

! Updating Smart Operation Panel G1.0 to
version G1.5 (Ricoh Service Rep ONLY)
󲻙 Download the latest SOP firmware listed
below from TSRC. See next page for location
of firmware at TSRC website.
! Install firmware in the following order:
1. OS_SmartOperationPanel
2. SDKService
3. Web Browser NX
Module Software Version
OS_SmartOperationPanel D1501440S 1.34
SDKService D1501437D 1.04.00
Web Browser NX D1501434D 1.301.0
Legacy UI D1501443N 1.26
Quick Copy D1501445G 1.16
Banner D1501448G 1.12
StateInfo D1501450H 1.20
Quick Scanner` D1501446E 1.13
Announce D1501449E 1.10
Smart Operation Panel G1.5
5

! Where to find Smart Operation Panel
firmware at the TSRC website.
1. Login to TSRC and select “What’s New”.
2. The latest Smart Operation Panel
firmware is located under the “Apps” tab.
Smart Operation Panel G1.5
6

Notes:
In order to use Smart Device Connector on
one of the MFPs listed below, you must
update the Smart Operation Panel first, and
then also update the mainframe firmware
modules listed below.
󲻙 MP C2003/2503/3003/3503/4503/5503/6003
󲻙 MP C401
󲻙 MP 2553/3053/3353
Module MPC3003
MPC3503
MPC4503
MPC5503
MPC6003
MP2003
MP2503
System/Copy 3.06 3.07 2.06
FAX [phone].00
Scanner 2.18 2.17 2.04
Network Support (NCS) 12.89 12.89 12.89
Web Support (NFA) 2.05 2.06 1.04
Printer 2.11 2.11 2.03
PCL 1.15 1.11 1.05
JavaVM 11.24.02 11.24.02 11.24.02
Smart Operation Panel G1.5
7

Helpful References: Available at TSRC
! Smart Operation Panel installation -
Video Nugget
󲻙 Answer ID: 184996
! Smart Operation Panel OS Update -
Video Nugget (Will help with OS update)
󲻙 Answer ID: 183826
! Smart Panel Application Update -
Video Nugget (Will help with install of
Smart Device Connector app on SOP)
󲻙 Answer ID: 183825
Follow steps below to access the videos:
󲻙 Login to TSRC "Video Nuggets "enter
Answer ID in search field.
Smart Operation Panel G1.5
8