Right On MLC-1100 User manual

UeRON INTERNATIONAL COMPANY
http://www.ueron.com.tw
TALLY Display System
MLC-1100 Master Control
User Manual
V2.000

INDEX
1.Description of MLC-1100….………………. 01
2. Software Installation….…..………….……..03
3. Accessories….……………………….………08

1.1 Description of MLC-1100
I. The MLC-1100 is the controller of RC-2000 RC-2100 RC2200 Display.
II. Control Standby/On-Air on each Display Unit.
III. Contain 3 ( 25 pin, female) TALLY IN ports. 2 RS232 ports and 36
RJ-45 ports.
IV. Connects up to 72 Display Units (RC-2000) by 2 linked controller
(MLC-1100).
V. Providing an RS-232 port to connect PC，Powerful software and
hardware for editing.
VI. Tally manager Program for editing in Windows XP and Win 7。
VII. Dimensions: 480×143×44mm (1U)。
1.2 Front view of MLC-1100
․36 pcs of RJ-45 connectors to connect TALLY Display System
1.3 Rear View of MLC-1100
․AC 100-240V 50-60Hz power socket
․Power On/Off button
․LED display light, MLC-1100 connects to RC-2000、RC-2100
RC2200 、PC connects to MLC-1100.
․RS-232 In/Out connectors
01

System Configuration:
Notice:
It requires an USB to DUB 9 PIN cable between PC and MLC-1100 system.
Please ensure you have already installed the USB driver. It’s a necessary
step before you start.
․Setting of DIP SWITCH
02
When switches are ”ON ”,
MLC-1100 is master controller.
It Connects RC-2000
ID01~ID36。
When switches are ”OFF ”,
MLC-1100 is the slave unit. ，
It has to link master controller
and connects RC-2000
ID37~ID72。

․Definition of D-SUB 25P TALLY IN
Master
Slave
Pin
TALLY
IN 1
TALLY
IN 2
TALLY
IN 3
Pin
TALLY
IN 1
TALLY
IN 2
TALLY
IN 3
1
ID01
tally
signal
ID13
tally
signal
ID25
tally
signal
1
ID37
tally
signal
ID49
tally
signal
ID61
tally
signal
2
ID02
tally
signal
ID14
tally
signal
ID26
tally
signal
2
ID38
tally
signal
ID50
tally
signal
ID62
tally
signal
3
ID03
tally
signal
ID15
tally
signal
ID27
tally
signal
3
ID39
tally
signal
ID51
tally
signal
ID63
tally
signal
4
ID04
tally
signal
ID16
tally
signal
ID28
tally
signal
4
ID40
tally
signal
ID52
tally
signal
ID64
tally
signal
5
ID05
tally
signal
ID17
tally
signal
ID29
tally
signal
5
ID41
tally
signal
ID53
tally
signal
ID65
tally
signal
6
ID06
tally
signal
ID18
tally
signal
ID30
tally
signal
6
ID42
tally
signal
ID54
tally
signal
ID66
tally
signal
7
ID07
tally
signal
ID19
tally
signal
ID31
tally
signal
7
ID43
tally
signal
ID55
tally
signal
ID67
tally
signal
8
ID08
tally
signal
ID20
tally
signal
ID32
tally
signal
8
ID44
tally
signal
ID56
tally
signal
ID68
tally
signal
9
ID09
tally
signal
ID21
tally
signal
ID33
tally
signal
9
ID45
tally
signal
ID57
tally
signal
ID69
tally
signal
10
ID10
tally
signal
ID22
tally
signal
ID34
tally
signal
10
ID46
tally
signal
ID58
tally
signal
ID70
tally
signal
11
ID11
tally
signal
ID23
tally
signal
ID35
tally
signal
11
ID47
tally
signal
ID59
tally
signal
ID71
tally
signal
12
ID12
tally
signal
ID24
tally
signal
ID36
tally
signal
12
ID48
tally
signal
ID60
tally
signal
ID72
tally
signal
13
NC
13
NC
14~25
GND
14~25
GND
03

2.1 Description & Editing TALLY DISPLAY
Provide WINDOWS XP & 7 drivers for user easy to set up and control the
System. Through the RS 232 interface from PC。
2.2 Run
1. Start the Tally V2.0 driver, Run Tally_ver2.EXE。
2. If there are any errors or cannot be ran on this page，please loan or re-instal
Microsoft .NET Framework 2.0 Service Pack 2 from Microsoft Web site。
04

STEP 2: Select “ connect “
Press “ connect” in this screen 。
STEP3: Select TALLY DISPLAY ID
Click mouse ，select any numbers you want to edit in
TALLY DISPLAY ( ID01~ID72 )。
STEP4: Set the font of TALLY
Select any types of font through WINDOW system，key in
words into“ Input Text”block。
05

STEP 5: Set the Display content
1. Show the content what you key in to the Input Text。
2. Change the position through the function keys
(Left, Right, Up, Down)。
3. Changes any contents if user requires in this section 。
STEP 6: Send alone
Press ”Send ”button，the system sends alone the content
which you sho content which shows on the TALLY DISPLAY ID。
STEP 7: Send in a group
Press ”Send ALL”button，the system sends contents in a group
contents wh group which shows in the TALLY DISPLAY ID。
STEP 8 : Sleep Mode
Press ”Sleep” button，all of Displays will be turned
“Wake Up” button backing to Sleep mode。
06

STEP 9 : Set Rolling Message Sign :
1. Choose directions (Left, Right) and Speeds (speed:0~speed:2) of Rolling
Message Sign 。
2. Press MarqueeOption button to ensure setting up ready。
Start Rolling Message Sign
3.In your TALLY ID what you choose, Select “Marquee” to starting
RollingMessage Sign function。
4. Remove “Marquee” to stop Rolling Message Sign function。
STEP 10: Load & Save
1. Clicks “SAVE”，the system saves the data in a BIN format。
2. Clicks “LOAD”，load your BIN format what you save in the system。
07

Accessories:
-12V/4 Ampre power supply & power core x 1 each.
-Installation Driver * 1.
08