Risco LightSYS Instruction manual

LightSYS Quick User Guide 

Stay Arm  
System Disarm and
Silence an Alarm  
Partition Away Arm    
Partition Stay Arm    
Partition Disarm   
Duress Unset  
Panic Alarm  
Fire Alarm  
Medical Alarm  
Quick ones Bypass  
Activate Output   
Define Follow-Me   
View Trouble    
View Event Log   
Keypad Chime On/Off    

Edit User Code   
one Testing (Walk
Test)
  
ManualmmacjdMANUAL DE UTILIZADOR
IGOIIGO
Away Arm

2 LightSYS Quick User Guide
Indicators:
(Power):
On: Power OK, No troubles
Off: No power
Rapid lash: System trouble
(Ready):
On: Ready to arm
Off: Not ready to arm
Slow lash: Ready to arm
with open Exit/Entry zone
(Arm) / RED LED
On: System armed
Away or Stay)
Off: System disarmed
Slow lash: System is in
Exit Delay
Rapid lash: Alarm
(Tamper) :
On: Tamper alarm
Off: No tamper alarm
( Stay / Bypass):
On: System armed at Stay /
Bypass zones in the system
Off: No bypass zones
( ire):
On: Fire alarm
Off: No fire alarm
lash: Fire trouble
Edit User Code
1. From the main display press .
2. Enter master code default code 1234) followed by .
3. Scroll to the option Codes/Tags > .
4. Scroll to Define and press .
5. Select a user and press .
6. Select Edit Code and press .
7. Enter the new code followed by .
8. To edit user label scroll to Edit Label and enter label.
9. Repeat the above steps for additional codes.
Assign Proximity Tag
1. Follow steps 1-5 of the Edit User Code above.
2. Select (Re)Write tag and press .
3. Within 10 seconds, approach the proximity tag to the keypad.

LightSYS Quick User Guide 3
Setting and Changing System Time and Date
1. Press and enter grand master code followed by .
2. Using the arrow keys, scroll to the option Clock and press .
3. The display will show Time & Date. Press .
4. nter the correct time in 24-hour format and date. For entering the date use the
keys to move the cursor and the / key to toggle among the
choices.
5. Press to save your settings.
SMS Control Commands
Controlling the System through SMS
(Note: Available only if your LighSYS is equipped with the GSM module)
SMS Structure: [User Code][Command]
Full arm: [Code] A
Home Arm: [Code] H
Group Arm: [Code][G][Select Group
A/B/C/D])
Full Disarm: [Code] D
Partitio Arm: [Code] A [Partition No.]
Partitio Disarm: [Code] D [Partition
No.]
Bypass zo e: [Code] B [Zone number]
U bypass zo e: [Code] UB [Zone number]
Activate Output: [Code] UOON [UO No.]
Deactivate Output: [Code] UOOFF [UO
No.]
Get system status: [Code] ST
Get SIM credit level: [Code] CR
Change FM number: [Code] FMPHONE
[FM serial number] NEW [New Phone
No.)
Examples:
To arm the system send SMS: 1234A
To arm partition 1 and 2 send SMS: 1234A12
To disarm partition 1 send SMS: 1234D1
Notes:
1. Command words are not case sensitive (they can contain both capital, small or mixed letters).
2. A separator between command words is not required, althou h it is accepted.
3. Default rand master code is 1234.

4 LightSYS Quick User Guide
Telephone Control Commands
Remark: Available only if your LightSYS is equipped with the voi e module.
Receiving a call:
1.Pi k up the phone.
2.Say “Hello” press [#]. You will
hear an event announ ement
message.
3.Choose an option from the
Acknowledgment menu.
Acknowledgment menu
A knowledge message: [1]
A knowledge and stop all dialing: [2] [User
ode] [#]
A ess Operations menu: [3] [User ode] [#]
Listen and Talk: [6] [3] [User ode]
Repeat the event message: [#]
Repeat the A knowledgment menu: [*]
Calling the System:
1.Dial the number of the premises.
•If an answering ma hine is
present at the premises: Let
the line ring on e, hang up
and all again.
•If an answering ma hine is
not in use at the premises:
Wait until the system pi ks
up. You will hear a
ontinuous tone .
2.After the tones, enter the 2-digit
remote a ess ode.
3.Enter your user ode followed by
[#].
4.Choose your option from the
Operations menu.
Operations Menu:
Arming all Partitions: [1] [1]
Arming by Partition: [1] [9] [Partition no.]
Disarming all Partitions: [2] [2]
Disarming by Partition: [2] [9] [Partition no.]
Changing Zone Bypass: [3] [Zone no.] [#] [9]
Operating Utility Outputs: [4] [UO no.]
Changing FM Numbers: [5] [FM no.] [#] [2]
[New phone no.]: [#] [1]
Listen in: [6] [1]
Talk: [6] [2]
Listen and Talk : [6] [3]
Re ord Messages : [7]
Exiting the System: [0]
Repeat the Menu: [#]
Return to previous menu: [*]
© RISCO Group 05/2011 5IN1520 B