Road Angel Pure User manual

QUICK START GUIDE
roadangelpure.co.uk
Version V.1.2

INTRODUCTION
ROAD ANGELTM PURE is a standalone GPS camera and accident
blackspot locator. It uses the latest global positioning satellite
technology to give you audible and visible alerts as you approach
hazardous sections of road:
• Fixed safety cameras
• Average speed monitoring zones
• Mobile safety camera vans
• Accident blackspots (as designated by the
Police and Local Authorities)
• Mobile laser guns
• Primary schools, congestion charging zones and
unprotected level crossings
With over 250,000 miles of road around the UK, knowing the
speed limit is often guesswork, that’s why ROAD ANGELTM PURE
also has an onboard database of road speed limits. Provided by
Here™, the road speed information is presented in a circular road
speed sign at the bottom left of the device.
Congratulations on your purchase of the latest
addition to the ROAD ANGELTM range, the ‘PURE’.
Stay connected to us via
Road Angel Group @RoadAngelGroup @Roadangelgroup

Please read the instructions to ensure your ROAD
ANGELTM PURE is set up correctly.
The ROAD ANGELTM PURE has two buttons, thus simplifying its
operation and helping to avoid the temptation to adjust the
equipment while driving. All configuration is done by connecting via
your smartphone, PC or Mac, making the menus easier to navigate.
Once the unit has been registered and your subscription has
been purchased, the road angel database will automatically sync
to your device with 24-48hours, this will enable full functionality of
the device.
The 5 Day Trial – upon first use of the device you will have the
option to activate a 5 day trial giving you the option to test all the
features the Pure has to offer. After the 5 day trial is over you will
need to purchase a subscription to continue full use and
protection the pure Offers.
SW
25
MPH
30
OVERVIEW
Long Press = Power On/Off
Short Press = UI Select Mode

DOWNLOAD THE APP
Download the ROAD
ANGELTM App from your
smartphone’s App source.
(e.g. iTunes or Google Play).
Activate the
ROAD ANGELTM App.
Road Angel

CHARGING THE UNIT
With the unit switched off, connect the device to the mains
charger to charge the internal battery, this may take up to 12 -14
hours, possibly overnight.
CHARGING
PLEASE WAIT
Use for computer
access and Charging
Charging only

REGISTER & SUBSCRIBE ONLINE
A Subcription must be purchased to enable all database updates.
You can do this via our website www.RoadAngelGroup.com by
using the serial number on the base of the unit.
Serial Number
1. Go to www.roadangelgroup.com
2. Click on the Registration link.
3. Follow the on-screen instructions.
As part of this registration process, you will be prompted
to purchase subscriptions for the Safety Camera, Blackspot
and Road Speed limit updates.
4. If you already have a pre-paid subscription, please call us
to activate.
You can also register by phone:
0330 320 3030
(Mon-Fri 9am-5pm).

CONFIGURATION 1
There are two ways to configure the ROAD ANGELTM PURE;
1.Smartphone or Tablet:- Enable WiFi mode on the ROAD
ANGELTM PURE to read and adjust the settings via the ROAD
ANGELTM App on your smart phone. The App can be downloaded
from your App supplier, Google Play or Apple ITunes.
2.Computer:- Connect the device to a PC or Mac with the
supplied USB cable and download the ROAD ANGELTM PURE
Update Software from our website.
Both methods use the same menus outlined below;
ALERT
This menu allows users to select which alerts they wish to be
notified of including, Accident Blackspots, Camera Van,
Congestion, School Zone, Laser detectors, Overspeed,
Overspeed Adjust, Alerts distance, Fatigue & Red Light.
DISPLAY
Brightness, Hardwired Mode, (If your device is fitted to your
vehicle, as opposed to being plugged into your vehicle’s
cigarette lighter), Auto Stand-By, Speed Units (MPH/KPH) and
Vehicle type, (e.g. Car, Tow, LGV, HGV, LMH, HMH, SBUS, LBUS.
WIFI ENABLED
ROADANGEL 25904004
Press & Hold
The ROAD ANGELTM PURE is now ready to connect.

CONFIGURATION 2
SOUNDS
There is a range of audio alerts for specific events and the sound
associated with each one can be customised. For example, you
might have a simple high tone for a school zone and a low tone
for rail tracks and a double beep for camera vans, you will also
be able to set the volume for each alert.
• Button Beep
• System Beep
• Over Speed Beep
• Blackspot Alert
• Camera Alert
• Congestion Alert
• School Zone Alert
• Laser Alert
• Red Light Alert
• Railway Alert
See full online guide:
RoadAngelPure.co.uk
Here are just some of the Audio Settings you can
pre-configure from the menu of your Smartphone or Tablet

DISPLAY ELEMENTS 1
SW
0
MPH
NW
14:59
0
30
0
NW
14:59
0
1. Road Speed
2. Compass
3. Communicate with Server
4. Alert and Proximity Meter
5. Speed Limit
The USB symbol will show if your device needs a firmware update.
SW 25
MPH
70
1
2
3
4
5
6
7
8
9
10
6. Battery
7. GPS Signal
8. SIM Signal Level
9. USB (See Note)
10.Speaker Auto/Mute
SCREEN MODES

DISPLAY ELEMENTS 2
Amber means in alert zone but
under speed
(subject to parameter _10, 0,
+5 or +10%)
Red means over the
speed limit
SW 29
MPH
30
SW 33
MPH
30
Camera Average
Speed
Camera
Blackspot
Hazard
Congestion
zone
Red
Light
Red Light
Dual
School Railway
Camera
Van
Live Van
Laser Gun
Speed Monitor
LIVE
Proximity
200 Metres
Proximity
300 Metres
Proximity
400 Metres