Robert Juliat SULLY 305L User manual

www.robertjuliat.com
115 W LED
DN41202100-A (EN)
Manual
Robert Juliat S.A.S. 32, rue de Beaumont, F 60530 Fresnoy-en-Thelle - phone : [phone] - fax : [phone] - [email protected]
LED SINGLE LENS LUMINAIRE
VALIDATION : 24/03/22
Type Standard North American
Fresnel 305LF 305CLF
Pebble Convex 305LPB 305CLPB
V1
- FIRMWARE: V3.0
- RJ-LED2 FIRMWARE PLATFORM (Node Mode) full manual is
available for download at robertjuliat.com/LED/PDF_PAGE

Robert Juliat reserve the right to change or alter any of the items detailed on this page,
to increase or improve manufacturing techniques without prior notice.
Table of Contents
1 User’s instructions...................................................................................................................................................................................................................................................................... 1
2 Presentation ................................................................................................................................................................................................................................................................................ 2
2.1 Functions..........................................................................................................................................................................................................................................................................2
2.2 Identication label ..........................................................................................................................................................................................................................................................3
2.3 Accessories included .......................................................................................................................................................................................................................................................3
2.4 Accessories .......................................................................................................................................................................................................................................................................4
3 Set-up ........................................................................................................................................................................................................................................................................................... 5
3.1 Mechanics ........................................................................................................................................................................................................................................................................5
3.1.1 Operating positions..............................................................................................................................................................................................................................................................................5
3.1.2 Minimum distance between a ammable material and the lighting unit ............................................................................................................................................................................5
3.1.3 Instructions for use ...............................................................................................................................................................................................................................................................................5
3.1.4 Hanging ..................................................................................................................................................................................................................................................................................................5
3.1.5 Safety cable ............................................................................................................................................................................................................................................................................................6
3.2 Electrical information .....................................................................................................................................................................................................................................................6
3.2.1 LED source ..............................................................................................................................................................................................................................................................................................6
3.2.2 Power supply..........................................................................................................................................................................................................................................................................................6
3.3 DATA .................................................................................................................................................................................................................................................................................7
3.3.1 DMX 512-A / RDM ................................................................................................................................................................................................................................................................................7
3.3.2 Art-Net / sACN........................................................................................................................................................................................................................................................................................8
3.3.3 Ethernet / DMX node............................................................................................................................................................................................................................................................................8
3.4 Accessories .......................................................................................................................................................................................................................................................................9
3.4.1 Front lter holder ..................................................................................................................................................................................................................................................................................9
3.4.2 Barndoors ...............................................................................................................................................................................................................................................................................................9
3.4.3 Changing lens......................................................................................................................................................................................................................................................................................10
4 Operations .................................................................................................................................................................................................................................................................................11
4.1 Light intensity ............................................................................................................................................................................................................................................................... 11
4.1.1 Range.....................................................................................................................................................................................................................................................................................................11
4.1.2 Control...................................................................................................................................................................................................................................................................................................11
4.1.3 Parameters ...........................................................................................................................................................................................................................................................................................11
4.1.3.1 Dimming resolution - DMX only.........................................................................................................................................................................................................................................11
4.1.3.2 Dimming curve .......................................................................................................................................................................................................................................................................11
4.1.3.3 Set maximum position..........................................................................................................................................................................................................................................................12
4.1.3.4 Dimming mode.......................................................................................................................................................................................................................................................................12
4.2 Strobe............................................................................................................................................................................................................................................................................. 13
4.2.1 Range.....................................................................................................................................................................................................................................................................................................13
4.2.2 Control...................................................................................................................................................................................................................................................................................................13
4.3 Response time................................................................................................................................................................................................................................................................13
4.3.1 Range.....................................................................................................................................................................................................................................................................................................13
4.3.2 Control...................................................................................................................................................................................................................................................................................................13
4.4 Beam size adjustment.................................................................................................................................................................................................................................................. 14
4.4.1 Range.....................................................................................................................................................................................................................................................................................................14
4.4.2 Control...................................................................................................................................................................................................................................................................................................14
4.5 Orientation................................................................................................................................................................................................................................................................... 14
4.5.1 Range.....................................................................................................................................................................................................................................................................................................14
4.5.2 Control...................................................................................................................................................................................................................................................................................................15
4.6 Colour ............................................................................................................................................................................................................................................................................ 15
4.7 Beam shaping............................................................................................................................................................................................................................................................... 16
4.7.1 Range.....................................................................................................................................................................................................................................................................................................16
4.7.2 Control..................................................................................................................................................................................................................................................................................................16
5 Controls and parameters ........................................................................................................................................................................................................................................................17
5.1 Web interface................................................................................................................................................................................................................................................................ 17
5.1.1 Control..................................................................................................................................................................................................................................................................................................17
5.1.2 Default IP address..............................................................................................................................................................................................................................................................................17
5.1.3 Network IP of the computer.............................................................................................................................................................................................................................................................17
5.2 LEDs Feedback.............................................................................................................................................................................................................................................................. 19
5.2.1 Trouble shooting.................................................................................................................................................................................................................................................................................19
5.2.2.1 Intensity ...................................................................................................................................................................................................................................................................................19
5.2.2.2 Auto-OFF ..................................................................................................................................................................................................................................................................................19
5.3 DMX512 - A remote control......................................................................................................................................................................................................................................... 20
5.3.1 Protocol.................................................................................................................................................................................................................................................................................................20
5.3.2 Conguration ......................................................................................................................................................................................................................................................................................20
5.3.3 Parameters ...........................................................................................................................................................................................................................................................................................21
5.3.3.1 DMX Hold .................................................................................................................................................................................................................................................................................21
5.3.4 DMX chart.............................................................................................................................................................................................................................................................................................22
5.3.5 DMX ranges..........................................................................................................................................................................................................................................................................................22
5.3.5.1 Strobe duration ......................................................................................................................................................................................................................................................................22
5.3.5.2 Strobe speed ............................................................................................................................................................................................................................................................................22
5.3.5.3 Response time .........................................................................................................................................................................................................................................................................22
5.3.5.4 Control mode ..........................................................................................................................................................................................................................................................................22
5.4 RDM remote control..................................................................................................................................................................................................................................................... 23
5.4.1 Protocol.................................................................................................................................................................................................................................................................................................23
5.4.2 Functions ..............................................................................................................................................................................................................................................................................................23
5.5 Art-Net remote control ................................................................................................................................................................................................................................................ 25
5.5.1 Protocol.................................................................................................................................................................................................................................................................................................25
5.5.2 Conguration ......................................................................................................................................................................................................................................................................................25
5.5.3 Local set-up..........................................................................................................................................................................................................................................................................................26
5.6 sACN remote control.................................................................................................................................................................................................................................................... 27
5.6.1 Protocol.................................................................................................................................................................................................................................................................................................27
5.6.2 Conguration ......................................................................................................................................................................................................................................................................................27
5.6.3 Local set-up..........................................................................................................................................................................................................................................................................................28
5.7 Local display and controls (option)............................................................................................................................................................................................................................ 29
5.7.1 Display...................................................................................................................................................................................................................................................................................................29
5.7.2 Menus ....................................................................................................................................................................................................................................................................................................30
5.7.3 Parameters ...........................................................................................................................................................................................................................................................................................31
6 Service ........................................................................................................................................................................................................................................................................................32
6.1 Preventive maintenance ............................................................................................................................................................................................................................................. 32
6.1.1 Frequency .............................................................................................................................................................................................................................................................................................32
6.1.2 General cleanin ...................................................................................................................................................................................................................................................................................32
6.1.3 General visual check ..........................................................................................................................................................................................................................................................................32
6.1.4 LED source ............................................................................................................................................................................................................................................................................................32
6.1.5 LED house and lens cleaning...........................................................................................................................................................................................................................................................32
6.2 Analysis.......................................................................................................................................................................................................................................................................... 32
6.3 Electronic thermal management system................................................................................................................................................................................................................... 33
6.4 Firmware update.......................................................................................................................................................................................................................................................... 33
6.5 Factory defaults............................................................................................................................................................................................................................................................ 34
6.5.1 Modes ....................................................................................................................................................................................................................................................................................................34
6.5.2 Control...................................................................................................................................................................................................................................................................................................34

EN
EN - 1 -
GENERAL INSTRUCTIONS
1. Not for residential use.
2. These fixtures must only be serviced by a qualified technician.
3. In addition to the instructions indicated on this page, relevant health and safety requirements of the appropriate EU
Directives must be adhered to at all times.
4. This fixture is in compliance with section 17 - Lighting appliance for theatre stages, television, cinema and photograph studios.
Standards NF EN 60598-1, NF EN 60598-2-17, Low Voltage Directive 2014/35/UE & EMC Directive 2014/30/UE.
5. This fixture is rated as IP20, and is for indoor use only.
FIXTURE
6. Ensure fixture is correctly mounted on an appropriate support.
7. Protection screens and lenses must be replaced in the event of any damage, such as cracks or deep scratches, since these might
reduce performance.
8. When hung or flown the fixture must be secured by an additional hanging accessory (such as a safety cable or bond) of suitable
length.
9. Safety bonds or cables must be securely attached to the back of the fixture and be as short as possible, or rolled up as necessary,
to minimise travel distance should the fixture be dislodged.
10. Movable accessories (scroller, etc.) must also be secured with a suitable safety cable or bond at the front of the fixture.
11. The combined weight of both the fixture and the accessories must be considered when choosing the load-bearing capability of
safety cable or bond.
12. Do not open lighting fixture when the source is on.
13. WARNING: LED source become hot during use. Allow fixture to cool before servicing.
14. Do not tamper with design of fixture nor any of its safety features.
15. Tighten electrical mains cable connections regularly and replace with one of identical specification if damaged.
16. Use only with correct power supply.
VENTILATION
17. Keep well away from flammable material.
18. Not for outdoor use. Do not cover. Do not permit fixture to get wet.
19. To avoid overheating, do not obstruct air vents.
20. Ensure any cooling fans are in correct working order. If fans are not working, turn fixture off immediately and service as necessary.
CLEANING
21. Do not touch the LED source with your fingers.
22. To clean the optical parts, use a soft cloth in combination with distilled water or isopropyl alcohol recommended for coated optics.
Do not use any cleaning product that contains solvents or abrasives, as these can cause surface damage. Dry with a soft lint-free cloth.
23. Regularly remove dust with a soft lint-free cloth.
24. If the fixture has filters, they must be cleaned frequently.
POWER SUPPLY
25. Disconnect from the mains before servicing.
26. Mains connection only. Do not connect to "electronic output" such as dimmer.
27. Ensure power supply circuit breakers, always remain accessible.
PLEASE NOTE
This product has been built to conform to European standards relating to professional lighting equipment.
Any modification made to our products will void the manufacturers' warranty.
1 User’s instructions
Minimum
distance
Risk
group 2
Risk
group 1
Photobiological safety according to EN62471
Risk group 2
CAUTION: Possibly hazardous optical
radiation emitted from this product.
Do not stare at operating lamp.
Maybe harmful to the eye.
Risk group 2. Luminaires should be positioned so that
prolonged staring into luminaire at a distance closer
than 12.3m for the 305LPB and 10.6m for the 305LF is not
expected.
305LPB:
0,62m (2,04 ft )
305LF:
0,53m (1,74 ft )
305LPB:
12,3m (40,35 ft )
305LF:
10,6m (34,78 ft )
X1 X2

EN
EN - 2 -
2 Presentation
2.1 Functions
Description
1. Identification plates
2. Data connector (IN and OUT)
3. Power connector (IN and OUT)
4. RJ45 network connector
5. Handle
6. Safety cable attachment point
7. Hanging yoke
8. Tilt index
9. Tilt locking handle
10. Focus adjustment
11. Lens (Fresnel or Pebble)
12. Accessories and colour filter holders
13. Accessories and colour filter holders locking system
14. Front accessories safety cable attachment point
15. Focus index
16. Local display and controls (option)
1
3
2
4
5
6
8
7
1314 11 15 16
12
10
9

EN
EN - 3 -
2.2 Identication label
1 2 3 4
2.3 Accessories included
Reference Description
1 PF500M2 180 x 180 mm (7.1 x 7.1 in) metal filter holder
2 DN41202200 Quick Start manual
3 CAL03 3 meter power cable ( 3G1,5 HO7RNF) with Neutrik PowerCon© True1 TOP
and CEE 7/7 (2P+T NF/SCHUKO) connectors (standard version)
4 CAL04 1,50m power cable UL/CSA with Neutrik PowerCon© True1 TOP connector
(North American version)
Description
Units :
- Weight = kilogram (kg).
- Intensity = Ampere (A).
- Voltage = Volt (V).
- Frequency = Hertz (Hz).
- Temperature = degree Celsius (°C).
1. MOD. : Model
2. VERS. : Version
3. U : Nominal voltage input (V)
4. I : Nominal intensity (A)
5. P : Maximum power input (W)
6. IP : International Protection Rating
7. t°a : Maximum ambient temperature (°C)
8. t°c : Maximum external temperature of the unit (°C)
9. Net weight (kg)
10. Minimum distance between a flammable
material and the lighting unit (m)
11. Colour temperature version
12. Serial number
13. Replace broken glass
14. Class 1 product label
15. Read manual first label
16. European conformity label
17. WEEE directive label
18. CEI-TR-62778 - Do not stare at light source
19. EN62471 - Risk group
20. UKCA (UK Conformity Assessed) label
1 2
34
5 6
7 8
9
10
11
12
13 14
18 15 16 2019 17

EN
EN - 4 -
5
6 7
8 9
10
2.4 Accessories
1 2 3 4
Reference Description
1
L150 F/2 Ø150mm Fresnel lens with double slot front cassette for 180x180mm accessories -
weight: 0.8 Kg
L150 PB/2 Ø150mm Pebble convex lens with double slot front cassette for 180x180mm accessories -
weight: 1.25 Kg
2 PCP1716A 16A blue 2P+E 6h IEC60309 power connector
3 PF500M2 180 x 180 mm metal filter holder
4 CF500 4 rotating leaves on a rotating barndoor - 180x180mm ( without safety cable) - weight: 0.82 Kg
5 TH600 180 x 180mm "Top hat" (without safety cable)
6 876 40 x 10mm hook clamp with 28mm screw for Ø35 to Ø50mm
7 880 40 x 10mm hook clamp with 28mm screw for Ø50 to Ø63mm
8 CS2 Safety cable Ø3mm (length = 600mm)
9 CS5 Safety cable Ø1,5mm (length = 300mm) for front accessory with karabiner and quick link
10 DMXcat Bluetooth DMX/RDM Multifunction test tool - City Theatrical DMXcat®
11 ROPT1 Narrow beam extender for 305LPB
11

EN
EN - 5 -
3 Set-up
3.1 Mechanics
3.1.1 Operating positions
3.1.2 Minimum distance between a ammable material and the lighting unit
3.1.3 Instructions for use
3.1.4 Hanging
• Ensure fixture is correctly mounted on an appropriate support
Minimum : 40°C
104°F
5°C
40°F
IP20 - Indoor use only
Maximum :
Net weight:
Fresnel: 8.5 kg (18.7 lbs)
Pebble: 8.8 kg (19.4 lbs)
90° 90°
0,2 m / 0.7 ft

EN
Daisy chain:
EN - 6 -
Power supply
Voltage Frequency Input power Connectors
100 T264 V 50-60 Hz
0,7 A / 130 W @ 230V
1,15 A / 135 W @ 120V
1,40 A / 135 W @ 100V
Max: 1,5A
Standby mode: 10W
Neutrik powerCON TRUE1 TOP
Input :
ref. NAC3FPX-TOP
3.2 Electrical information
3.2.1 LED source
Never touch or scratch the LED surface.
See 6.1.4 LED cleaning procedure if cleaning is necessary.
3.2.2 Power supply
3.1.5 Safety cable
• Class 1 product. This luminaire must be earthed.
• Must be connected directly to AC power. Do not connect to dimmer power.
• Automatic mains voltage detection.
Power
Maximum :
22 units @ 230V
11 units @ 120V
• When hung or flown the fixture must be secured by an additional hanging accessory (such as a
safety bond or cable) of suitable length.
• The combined weight of both the fixture and the accessories must be considered when choosing
the load-bearing capability of safety cable or bond.
• Safety cables or bonds must be securely attached to the back of the fixture and be as short as
possible, or rolled up as necessary, to minimise travel distance should the fixture be dislodged.

EN
2
1
In Out
EN - 7 -
DMX OUT DMX IN
1
22
3
3
4
4
55
1
Power cable
Power cable Connector Mains plug Cable type Cable length Wiring
1 Standard
version Neutrik®powerCON
TRUE1 TOP
NAC3FX-W-TOP
CEE7/7 3G1.5
H07RNF
3 m
9.8 ft
Live: Brown
Neutral: Blue
Ground: Yellow/Green
2
North
American
version
-
14AWG
SJ TYPE
(UL/CSA)
1.5 m
4.9 ft
Live: Black
Neutral: White
Ground: Green
DATA connectors
PIN # DMX Description
1 Shielding Foil & Braided Shield
2 DMX (-) 1st conductor of 1st twisted pair
3 DMX (+) 2nd conductor of 1st twisted pair
4 Not used 1st conductor of 2nd twisted pair
5 Not used 2nd conductor of 2nd twisted pair
3.3 DATA
3.3.1 DMX 512-A / RDM
Protocol Input connector Output connector
USITT DMX 512-A
RDM XLR 5-pin XLR 5-pin
Maximum :
31 units total
Daisy chain:
DMX Console

EN
EN - 8 -
3.3.2 Art-Net / sACN
Protocol Input connector Output connector
Art-Net
sACN RJ45 -
Protocol Input connector Output connector
Art-Net
sACN RJ45 DMX
3.3.3 Ethernet / DMX node
Network
switch*
Art-Net
sACN
(*) A 1000 base-T switch that supports IGMP (Internet Group Management Protocol) is necessary if the unit is connected
to a network switch to control multiple devices. The usage of non IGMP switch capability can cause erratic behavior of all
connected devices.
For further reading: https://en.wikipedia.org/wiki/Internet_Group_Management_Protocol
RJ-LED2 FIRMWARE PLATFORM (Node Mode) full manual is available for download at robertjuliat.com/LED/PDF_PAGE
Web
interface
Web
interface Lighting desk
Lighting desk
Daisy chain:
Fixture Fixture
Fixture
Network
switch
Fixture Fixture (NODE)Fixture
- Node function must be activated only on the first unit of the daisy chain
(see Web Interface section of the manual).
- Web interface is always available regardless of the protocol (Art-Net / sACN) selected.
DMX
Art-Net
sACN
Limited to
15 Fixtures
Daisy chain:

EN
EN - 9 -
The filter holder includes perforations designed
for stapling to keep the gel in position.
3.4 Accessories
3.4.1 Front lter holder
1
2
3
4
For filter dimensions,
see section 4.6
3.4.2 Barndoors
1
2
3
Filter frame slot
Front accessories safety cable
attachment point
Barndoors slot

EN
EN - 10 -
3.4.3 Changing lens
1
2
4
5
3L150 F/2
L150 PB/2

EN
0% 100%
EN - 11 -
4 Operations
4.1 Light intensity
4.1.1 Range
4.1.3 Parameters
4.1.3.1 Dimming resolution - DMX only
TSet through RDM protocol, web interface or local control (option)
4.1.3.2 Dimming curve
TSet through RDM protocol, web interface or local control (option)
Resolution DMX mode
8 bits – 255 steps 1 - 3
16 bits – 65 535 steps 2 - 4
Remotely with DMX512-A /
Art-Net / sACN protocols.
DMX512-A
4.1.2 Control
or
Web
interface
RDM
compatible
device
RDM
TSet through RDM protocol or
web interface
Locally, when equipped with
this option
HTP mode (Highest Takes Precedence):
Light output is the highest value of DMX512 command or local control
Focus mode: when standby screen displayed,
Push Exit for 3 secs →Light output = 100% for 1 minute
2x times Exit →Light output = 0%

EN
EN - 12 -
4.1.3.3 Set maximum position
TSet through RDM protocol, web interface or local control (option)
4.1.3.4 Dimming mode
TSet through RDM protocol, web interface or local control (option)
100%
100%
0% 0%
----> Maximum (80%)
Light Output
Mode Result
Without PWM Flicker-Free, perfect for filming
PWM 17 kHz Good dimming quality (Default Value)
PWM 3,2 kHz Very good dimming

EN
X ms
DMX 0 = 0 ms
1 = 100 ms
255 = 4000 ms
DMX512-A
EN - 13 -
4.3 Response time
4.3.1 Range
4.2 Strobe
4.2.1 Range
Strobe duration
Strobe speed
4.2.2 Control
0 = OFF
0 = 0.1Hz
1 = 1ms 255 = 20ms
255 = 10Hz
TRemotely with DMX512-A / Art-Net / sACN protocols / local control (option)
Mode 3 – 4
4.3.2 Control
Mode Speed
NONE OFF
SLOW 700 ms
MEDIUM 470 ms
FAST 350 ms
CUSTOM 0 - 4000 ms
Mode Speed
NONE OFF
SLOW 700 ms
MEDIUM 470 ms
FAST 350 ms
CUSTOM 0 - 4000 ms
DMX512-A
or
Web
interface
RDM
compatible
device
RDM
TSet through RDM protocol or
web interface
Remotely, with
DMX512-A / Art-Net / sACN protocols
Mode 3 – 4 only
Only when no DMX detected :
Tselection in SETUP/DIMMER/
RESPONSE TIME
Locally, when equipped with this
option

EN
EN - 14 -
Function Range
PAN 0 T360°
TILT
TU = 0 T90°
TD = 0 T90°
4.4 Beam size adjustment
4.4.1 Range
4.4.2 Control
4.5 Orientation
4.5.1 Range
Beam angle 18° Field angle 29°
Beam angle 67° Field angle 100°
Minimum:
Maximum:
Minimum:
Maximum:
Beam angle 8° Field angle 16°
Beam angle 60° Field angle 90°
305LPB
305LF
50%
50%
50%
50%
3%
3%
3%
3%
Focus

EN
EN - 15 -
4.6 Colour
Location
Front filter holder
Type Standard coloured gel filter
Dimensions
Installation See 3.4.1
4.5.2 Control
Fixed colour
Index

EN
EN - 16 -
4.7 Beam shaping
4.7.1 Range
4.7.2 Control

EN
EN - 17 -
5 Controls and parameters
5.1 Web interface
5.1.1 Control
5.1.2 Default IP address
5.1.3 Network IP of the computer
5.1.4 Connect to web interface
1 - Open a web browser (Microsoft Edge, Firefox, Apple Safari...)
2 - Enter the URL address of the Sully fixture: http://2.XXX.XXX.XXX
3 - All parameters can be now modified
Ethernet
connection
The fixture must be connected to a compatible network or directly to a computer using an ethernet cable.
TIf address unknown (due to previous modification) you can retrieve the current IP address with an
RDM Controller or RDM Test Tool. As a last resort a hard reset can be done (see 6.5 Factory defaults).
By defaut :
DHCP = OFF
Address = 2.XXX.XXX.XXX
Mask = 255.0.0.0
The computer must be on the same network as the Sully fixture.
Please refer to your computer Operating System to change IPV4 parameters :
• Microsoft Windows:
https://support.microsoft.com/en-us/windows/change-tcp-ip-settings-bd0a07af-15f5-cd6a-363f-ca2b6f391ace
• MAC OS: https://support.apple.com/en-gb/guide/mac-help/mchlp2718/10.15/mac/10.15
1 - ADDRESS = 2.XXX.XXX.YYY with YYY ≠ XXX
Do not use the same IP address as the Sully fixture
2 - MASK = 255.0.0.0

EN
EN - 18 -
5.1.5 CCT selection
Until now, the CCT of the LED source was not taken into account. From V3.0, your device will be
automatically recognized as CW or WW source.
Devices shipped with firmware prior to V3.0 do not have a designated CCT.
After updating to V3.0, it is highly recommended to specify the CCT of your device.
For this you will have to stay on the Web Page that you used for the update.
In the Source section of the HOME tab, the CCT of your device is indicated.
• If "unknown", please select the CCT of your device and click on icon or , then on the arrow .
• Changing the source type changes the Model_ID as well. It is used in libraries to recognize devices
automatically and for an Auto-Patch.
• If the source type has to be changed or in case of typing error, it will be always possible to change
the source type in the Expert mode which is protected by a password.
After updating your device with firmware V3.0, we strongly recommend that you
update the source type (CCT) either to CW (Cold White) or WW (Warm White) by following
the procedure described in the section below: 5.1.5 CCT selection