Robic SC-889 User manual

Suitable mode: C5094E Size: A4
5. Alarm time
6. Date
7. Month
8. Hourly chime on
7. Recall
8. Chrono
9. Current lap/split time
10. Total lap/split time
11. Stopwatch
12. Run icon
13. Stop icon
14. Sep icon
15. Lap icon
16. Split icon
Activate
hourly chime
Activate alarm and
deactivate hourly chime
Activate alarm
and hourly chime
Deactivate alarm
and hourly chime
Time of
Day mode
Press EPress EPress EPress E
180 TRIPLE MEMORY
Operation condition Select orderOperation
In stopwatch mode, press Dto clear
all values. Press C
Display icon
Upwards
Downwards
Stopwatch mode Select lap or split
Press and
hold C for 3 ” Press D
Choose SEP or ALL
Press DPress A
Press DPress A
Press D
StartStopwatch mode First split
Second split
Third splitFourth split & Stop
SC-889 Speed and Sport Timer
180 Dual Memory Stopwatch with Speed Timer
USER’s Instructions ©MBI Corp.
INTRODUCTION
Thank you for purchasing the Robic SC-889—Speed and Sport Timer. Your
purchase brings you a reliable, World-Class Timer which measures performance
for a wide array of sports and many other activities. Please become familiar with its
operation so you can enjoy its many fine features:
FEAUTRES & FUNCTIONS
● Professional chronograph (stopwatch) with Lap, Split and running lap or split
times. The person using the SC-889 can decide if the bottom row show running
lap or split times.
● Professional Speed Timer in MPH or KPH with display of Lap Number, Lap
Speed, Lap Time and current Lap Running Time.
● 180 Dual Memory recall capacity and a total reading capacity of 1000 times. Use
the memory without interrupting your timing results, the memory is instant and
complete.
● Memory recall can be in ascending (1, 2, 3…) or descending (…3, 2, 1)
order-selected by the user…exclusively from Robic.
● Fastest, Slowest and Average Lap time display recall, on demand.
● 1/100 second precision up to 60 minutes. Lap Counter to 999 readings.
● Choose the current running Lap time or Split (Cum) time in the lower row of the
display.
● Time of Day, Alarm and Calendar
● On demand LED backlight for low light or no light use.
● Water resistant design.
LOCATION & OPERATION OF THE PUSHBUTTONS
A: [ START/STOP ] key
B: [ MODE /SELECT ] key
C: [ RECALL/SET ] key
D: [ LAP•SPLIT/RESET ] key
E: [ ADVANCE ] key
● In stopwatch mode, press D to Reset to all zeroes.
DISPLAY INDICATORS
Time of Day Mode
1. Alarm icon
2. Weekday
3. Real time
4. Alarm on
Stopwatch Mode
1. Lap/Split number
2. Upwards
3. Downwards
4. Average
5. Maximum
6. Slowest
Speed Timer Mode
1. Speed number
2. Speed
3. Mile
4. KM
5. Current speed
6. Distance
7. Speed timer
SETTING THE TIME OF DAY & CALENDAR
● In Time of Day, press and hold Cfor 3 seconds to enter time and date setting,
Alarm hour flashes.
● Press Eto advance the value.
● Press B to set to the next item, and press Eto adjust the value. Setting sequence
will be:
Alarm hour>Alarm minute>Second>Hour>Minute>Month>Date>Weekday>
12/24Hour format
● Press C at any time to exit the setting process.
ACTIVATE AND DEACTIVATE ALARM AND HOURLY CHIME FUNCTION
● In Time of Day mode, press E>E>E>Eto activate or deactivate alarm and
hourly chime function.
NOTE:
The alarm will sound for 20 seconds. You may press any button to silence the alarm.
HOW TO OPERATE THESTOPWATCH
Please note your SC-889 Stopwatch will not operate if the Speed Timer is not reset
to all zeroes. If the word "Chrono" does not appear, refer to the Speed Timer
Section for instructions how to Reset to all zeroes.
● In time of day mode, press B, “ ” displays for 2 seconds and enter
stopwatch mode.
● The SC-889 will record up to 1000 readings and recall the previous 180 times.
For example, if the current display is 250th lap, then 71 to 250 laps are recorded.
● Stopwatch: 1/100 second resolution for 60 minutes
1 second resolution up to 24 hours
● The SC-889 will operate up to 24 hours after which time it will stop. You will then
need to clear the time(s) by pressing and holding D. This will reset the time to
all zeroes.
SELECT MEMORY RECALL DIRECTION FOR STOPWATCH
SETTING STOPWATCH OPTIONS
● Press and hold Cfor 3 seconds to enter stopwatch setting mode, and press Eto
select LAP or SPL. Once selected, the stopwatch will record time as lap time or
split time in the lower row of the Display.
● Press B to step to “SEP” or “ALL” setting. Either one will operate the same.
OPERATE AND USING THE STOPWATCH
The stopwatch records each Lap and Split Time up to 1000 readings. For example,
if you would like to measure 4 lap or split time:
● In time of day mode, press Bto enter stopwatch mode .Press Dto Reset if needed.
● Press Ato start timing. RUN indicator appears.
● Press Dto record the time of each lap and split when completed, i.e.
first lap/split, second lap/split, etc. Lap Counter increases by one each reading.
● Press Ato record the fourth lap/split and stop measurement, STOP appears.
The following illustrates this progression:

Rev-0 2014.8.21 11:45 A.M.
Operation condition Select orderOperation
In speed timer mode, press Dto clear
all values. Press C
Display icon
Upwards
Downwards
Choose SEP orALLSpeed timer mode Set unit and distance
Press DPress A
Press DPress A
Press D
StartSpeed timer mode First lap
Second lap
Third lapFourth lap & Stop
Lap time measurement Split time measurement
NOTE:
Lap is the amount of time from the previous reading while SPLIT is the amount of accumulated
time from the start of the event.
MEMORY RECALL OF STOPWATCH
● When the record of lap or split is more than 1, press Cto read the records.
● Press Cto check the records in this sequence:
Maximum lap/split>slowest lap/split>average lap/split>split speed>
records upwards or downwards.
Press and hold Cto speed up checking.
OPERATING THE SPEED TIMER
Please note your SC-889 Speed Timer will not operate if the Stopwath is not reset
to all zeroes. If the word "Speed" does not appear, refer to the Stopwatch Section
for instructions how to Reset to all zeroes.
● In stopwatch mode, press D to clear stopwatch value ,then press B, “ ”
displays for 2 seconds and enter speed timer mode.
● Press and hold Cfor 3 seconds to enter speed timer setting mode.
● The maximum distance is 999.999km (mile).
● Maximum speed is 999.999km/h(MPH), when the calculating speed exceeds
this value, “Error” displays with beeping, and time continues counting.
● The speed timer can display up to 999 times of speed, and recorded the last 180
times. For example, if the current display is 250th speed, then 71 to 250 speeds
are recorded.
● Speed timer accuracy: 0~59minutes 59seconds: 1/100 seconds
60minutes ~23 hour 59minute 59second: 1 second
● The maximum record time of speed timer is 24 hour, and when total record time
reaches 23 hour 59minute 59second, speed timer stops record automatically. In
this case, the values need to clear before start new records.
SELECT MEMORY RECALL DIRECTION FOR SPEED TIMER
SET SPEED TIMER OPTIONS
● In speed timer mode, press Dto clear all the values.
● Press and hold C for 3 seconds to enter speed timer setting mode, unit digit (KM
/MILE) flashes. Press Eto adjust it.
● Press B to step the next item, and press Eto adjust it.
The setting sequence will be:
KM/MILE> hundreds of distance> tens of distance>units of distance> percentiles
of distance>deciles of distance> quantiles of distance>SEP/ALL
● Press C to confirm and exit setting.
NOTE:
For SEP(separate) and ALL setting, it is OK to choose either of them, as they make no
difference to speed timer function.
USING THE SPEED TIMER
Using this function, you can record the spend of each lap of fixed distance.
For example, if you measure 4 lap time of the fixed distance, operate as follows:
● In speed timer mode, press Dto clear the values.
● Press Ato start counting, with “RUN” icon displaying on LCD.
● Press Dto record the time you spend on each lap when you finish first lap,
second lap and third lap.
● Press Ato record the fourth lap and stop measurement, with "STOP" icon
displaying on LCD.
READ RECORDS OF SPEED TIMER
● When the record of speed is more than 1, press Cto read the records.
● Press Cto check the records in this sequence:
Maximum speed>slowest speed >average speed > speed records upwards
or downwards.
Press and hold Cto speed up checking.
ACTIVATING THE BACKLIGHT
In any mode, press and hold Bfor 3 seconds will turn on backlight for 5 seconds.
Use the backlight only as necessary to save on the battery life.
BATTERY REPLACEMENT
If there is no display on the LCD or the display becomes dim, remove the screws at
the back of the unit and replace with a new CR2032 battery at once.
NOTE:
Attention! Please dispose of the used unit or battery in an ecologically safe manner.