Alcatel SW10 User manual

CJB1F60ALAAC
MOVETIME
Track&Talk watch
Quick Start Guide

2
Know your watch
Overview
Front Back
B
C
D
E
F
G
A
H
I
J
AWatch-buon
BSpeaker
CVolume + On the Home screen: Press to open the
phonebook, press again to choose contacts.
In the List mode: Press to increase the volume
or page up.
DVolume - On the Home screen: Press to enter the voice
messages list.
In the List mode: Press to decrease the volume
or page down.
When you have an incoming voice call, short
press to answer.
Press for 3 seconds to start recording.

3
ESOS key Emergency calls: Long press the ‘SOS’ key for at
least 3 seconds.
FPower key • Power on/o.
• Enter into the volume list.
• When you have an incoming call, short press
to reject the call.
• On the Home screen, short press to enter
the volume mode.
• On all screens other than Home, short press
once to go back.
• Depress the buon for at least 8 seconds to
iniate a system reboot.
GMicrophone
HWristband
ISIM slot
JCharging port
Notes:
• The screen will light up by pressing any key.
• Watch only supports GPRS network and Nano SIM card without
encrypng PIN code.
Screen
Baery power
Time
Date
G: GPRS
R: Roaming
Steps
Signal strength
Voice SMS ps
When the watch is roaming, the right side of the signal bar will appear
“R”. At the same me, prompt informaon will display in the message
bar in the applicaon. Note: Consult the local operators to open the
roaming service.

4
Inserng Nano SIM card

5
Basic operaons on your watch
Power on/o
Press and hold the Power key for 3 seconds to power on/o your
watch.
Press and hold the Power key for 8 seconds to reboot when your
watch crashes.
SOS
Press and hold the SOS key for 3 seconds on any screen (except the
incoming/ongoing/dialing call screen) to call ve key family members.
1. Once your watch has obtained a x on your locaon, it will
send details of your locaon to 10 chosen family members.
(Applicaon shows the SOS alarm screen with prompt).
2. It will aempt to dial 10 chosen numbers in turn. If there is no
answer within 10 seconds, it will move onto the next number in
the list unl a call successfully connects.
3. If a SIM card is not inserted, or if the watch does not have a
signal, the SOS feature will instead aempt to dial 112
(Emergency services). You can press the Power Key at any me
to either cancel the call setup or hang up the call. Note: Currently
emergent number is not set by default, you can customize it.
Note: Press the Power key to interrupt the call.
Sending a voice message
1. Press Volume - for 3 seconds to start recording.
2. Release to stop recording, as well as to send the voice message.
3. When nishes sending, it will go back to the last screen.
Note: Nocaon icon will ash when your watch receives a voice
message.
Voice message management
• Press Volume + to scroll up the menu.
• Press Volume - to scroll down the menu.
• Short press the Power key to go back to the Home screen.
Note: The storage is limited to 30 voice messages. If there are more
than 30 messages, the message will be overwrien automacally.
Calling and answering
1. Short press Volume + to enter the family number list.
2. Short press Volume + to choose the next family number.

6
3. Press Volume - for 3 seconds to send a voice message to chosen
family number.
Note: Press the Power key to go back to the Home screen.
Volume adjustment
• Short press power on/o buon rst, then press Volume + to
increase the volume.
• Short press power on/o buon rst, then press Volume - to
decrease the volume.
Note: Decrease the volume to mute your watch. When you have an
incoming call, your watch will vibrate.
Power o & Airplane mode
Long press the Power key for 3 seconds to enter “Power o &
Airplane mode” screen.
Update
Watch will install the rmware automacally aer nishing
downloading.

7
Using the applicaon from your
smartphone
Download the applicaon from App Store or Google play.
Pairing
1. Input the IMEI to pair your watch
Obtain the informaon of IMEI number through the package
informaon or pressing Volume +/- and the SOS key in the same
me unl the informaon displayed on the screen. Then input the
IMEI number to the applicaon informaon bar and conrm.
Input IMEI
and press
Conrm.
The server will send a random code to your watch and the informaon
displayed on the screen should be noted at this me. Input the
random code to the applicaon informaon bar and conrm.

8
2. Scan the QR code to pair your watch
You can share the QR code to add some group members. Scanning
the QR code will be automacally adjusted according to the interval
me.
Funcons
Applicaon screen
Slide le
to nd
the list
Hide or show the shortcut menu.
Click to refresh the watch locaon instantly.

9
Click to enter the details page of Electronic fence.
Click to jump to the navigaon page.
Steps.
Power.
Click to enter the voice message screen.
Click to dial by the watch.
Member management
Touch Family numbers to open the member list.
Set the local emergency call number here.
Note: Each device will have only one administrator, and the user will
be regarded as an administrator for the rst me.

10
Administrator can transfer the management rights in the members’
management page.
Voice message
Touch to enter the voice screen.
When you create a voice message, the length of each recording is
15s. You can dialogue with some group members, or dialogue with
your children alone.

11
Safe zone
Touch to enter the Safe zone screen.
In this funcon, you can set an area on the map as a safe area for your
child. When your child leaves the security area, you will be noed.
Pay aenon that the meliness of the nocaon will depend on
the frequency of the locaon. The longer interval me for posioning
that you set, the me to receive the nocaon will be relavely
longer.
Save power
Touch to enter the power screen.
You can choose the locaon frequency according to the daily usage
habit. Dierent posioning mode will aect the posioning accuracy
and standby me. Choose the appropriate use mode according to
the actual scene.

12
Mute me
Touch Mute me to set the reminder funcon of your watch.
You can set to mute or cancel the vibraon according to the actual
environment in use by your children. Pay aenon that in the silent
mode, children can recover the seng by adjusng the volume of the
watch. But in the vibraon mode, it need to be recovered through
applicaon seng.
Upgrade
Touch Update to upgrade your watch and App.
The status bar at the boom will display the related downloading
progress when upgrading. Be aware that the watch relies on the
network when upgrading. It will use a certain amount of data.

13
FAQ
1. Unable to obtain the posion of your watch
Go to check if your watch has a SIM card or if you’re in a place where
can’t receive the signal. If SIM was inserted with device already
powered on, it will not register as this device does not support “hot
swap”. In this case user will need to restart (power o/on device) to
restore service.
2. Unable to obtain the vericaon code
You need to open the relevant SMS receiving service. For more
informaon, consult your local operators.
3. Waterproof noce
This product has an IP65 rang which means it is protected against
water jets. Do not submerge your watch in water, for example when
swimming.
4. Posioning accuracy
Your watch will provide three kinds of posioning modes: GPS,
WLAN, LBS. Posion accuracy will be dierent according to dierent
posioning methods. All posion informaon is only for reference in
a certain range.
5. Data service
The posion informaon of watch and remote seng caused by voice
message and applicaon will be working based on the communicaon
between GPRS network and cloud server. It will consume the data
which need to be paid by yourself.
6. SOS
The guardian should be familiar with the specic operaon of SOS
and the operaon instrucon for children.
7. Whether the material of this product is harmful to children
The material in use has passed related safety tesng for children,
which can ensure the safety of daily use.
8. Charging
When the charging port is corroded or dirty, it will seriously aect the
charging process which requires a clean surface. Aer playing sports,
wipe any sweat from your watch before charging.

14
9. Storage and use of locaon data for user
For all the data related to you, we will only use the queries you submit
to us. We will not use for any commercial applicaon or development
without authorisaon.
www.sar-ck.com
This product meets applicable naonal SAR limits of 2.0W/kg.
The specic maximum SAR values can be found in the secon of this
user guide.
When carrying the product or using it while worn on your body, either
use an approved accessory such as a holster or otherwise maintain
a distance of 5 mm from the body to ensure compliance with RF
exposure requirements. Note that the product may be transming
even if you are not making a phone call.
Cercaon
WEEE Approval
This device is in compliance with the essenal requirements and
other relevant provisions of the Waste Electrical and Electronic
Equipment Direcve 2012/19/EU (WEEE Direcve).
This symbol on device means that these products must
be taken to collecon points at the end of their life:
- Municipal waste disposal centres with specic bins for
these items of equipment.
- Collecon bins at points of sale.
They will then be recycled, prevenng substances being disposed of
in the environment, so that their components can be reused.
In European Union countries:
These collecon points are accessible free of charge.
All products with this sign must be brought to these collecon points.
In non European Union jurisdicons:
Items of equipment with this symbol are not to be thrown into
ordinary bins if your jurisdicon or your region has suitable recycling

15
and collecon facilies; instead they are to be taken to collecon
points for them to be recycled.
CAUTION RISK OF EXPLOSION IF BATTERY IS REPLACED BY AN
INCORRECT TYPE. DISPOSE OF USED BATTERIES ACCRDING TO
THE INSTRUCTIONS
Following air regulaon, the baery of your product is not charged.
Please charge it rst.
RoHs Approval
This device is in compliance with the restricon of the use of
certain hazardous substances in electrical and electronic equipment
Direcve 2011/65/EU (RoHs Direcve).
Radio Waves
Proof of compliance with internaonal standards (ICNIRP) or with
European Direcve 1999/5/EC (R&TTE) is required of all modem
models before they can be put on the market. The protecon of the
health and safety for the user and any other person is an essenal
requirement of these standards or this direcve.
THIS DEVICE MEETS INTERNATIONAL GUIDELINES FOR
EXPOSURE TO RADIO WAVES.
This device is a radio transmier and receiver. It is designed not
to exceed the limits for exposure to radio waves (radio frequency
electromagnec elds) recommended by internaonal guidelines. The
guidelines were developed by an independent scienc organizaon
(ICNIRP) and include a substanal safety margin designed to assure
the safety of all persons, regardless of age and health.
The radio wave exposure guidelines use a unit of measurement
known as the Specic Absorpon Rate, or SAR. The SAR limit for
mobile devices is 2 W/kg.
Tests for SAR are conducted using standard operang posions
with the device transming at its highest cered power level in all
tested frequency bands. The highest SAR values under the ICNIRP
guidelines for this device model are:
Maximum SAR for this model and condions under which it was
recorded.
Body-worn SAR GSM 1800 0.872 W/kg
During use, the actual SAR values for this device are usually well
below the values stated above. This is because, for purposes of

16
system eciency and to minimize interference on the network, the
operang power of your mobile device is automacally decreased
when full power is not needed for the call. The lower the power
output of the device, the lower its SAR value.
Body-worn SAR tesng has been carried out at a separaon
distance of 0mm. To meet RF exposure guidelines during body-worn
operaon, the device should be posioned at least this distance away
from the body. If you are not using an approved accessory ensure that
whatever product is used is free of any metal and that it posions the
phone the indicated distance away from the body.
The World Health Organizaon has stated that present scienc
informaon does not indicate the need for any special precauons for
the use of mobile devices. They recommend that if you are interested
in further reducing your exposure then you can easily do so by
liming your usage or keep the device away from the head and body.
For more informaon you can go to www.alcatel-mobile.com;
Addional informaon about electromagnec elds and public health
are available on the following site: hp://www.who.int/peh-emf
This device is equipped with a built-in antenna. For opmal operaon,
you should avoid touching it or degrading it.
Licenses
This equipment is in compliance with the essenal requirements and
other relevant provisions of Direcve 1999/5/EC. The enre copy
of the Declaraon of Conformity for your device can be obtained
through our Website: www.alcatel-mobile.com
Warranty
The device is warranted against any deviaon from technical
specicaons for a period of twelve (12) (1) months from the date
specied on your original invoice.
Under the terms of this warranty, you must immediately inform your
vendor in case of a conformity defect on this device, and present a
proof of purchase.
(1) The warranty period may vary depending on your country.