Robus OLYMPIC User manual

OLYMPIC LED FLOOD LIGHT
RP200LEDF-04
Model No. RP200LEDF-04
Supply Voltage: 100-240V~50/60Hz
Power Consumption: 200W
Lumen Output: 16,000lm
Colour Temperature: 4500K
CRI: 80
Beam Angle: 100
o
Power Factor: >0.9
Operating Temp Range:
-15
o
C < Ta < 40
o
IP Rating: IP65
Safety Classification: Class I,Must be Earthed
Dimensions(mm): (W)435X(H)565X(D)150
Weight: 14.2Kg
Warranty: 5 year
Projection Distance: 30m - 35m
Max Projection Area: 35m x 18m
Mounting Height: 4m – 8m
Complies with EN 60598-2-5, EN 60598-1, EN 62493,
EN 55015, EN 61547, EN 61000-3-2, EN 61000-3-3,
EN 61347-2-13, EN 61347-1
1. Ensure mains supply is switched off before commencing
work.
2. Select suitable location for luminaire.
3. Mark wall with appropriate fixing positions. Before
drilling, ensure that the hole does not impinge on pipe
work, cables or other building services.
4. Mount luminaire on wall.
5. The luminaire is supplied with 0.5m of rubber cable.
Using suitable IP rated enclosure terminate Brown (Live),
Blue (Neutral) and Green/Yellow (Earth) to switch
supply..
6. This product has no user serviceable parts. If any part is
damaged, disconnect from mains and discontinue use.
Note: No “fixings screws provided’, please use
appropriate fixing screws.
Issue 3 031114
PLEASE READ INSTRUCTION BEFORE COMMENCING INSTALLATION AND RETAIN FOR FUTURE REFERENCES.
! Electrical products can cause death or injury, or damage to property. If in any doubt about the installation or
use of this product, consult a competent electrician
Note:
Product technical information and specification may change over time without prior notification
For the latest technical information please visit our web site WWW. ledgrouprobus. com or robusdirect. com
INSTRUCTION MANUAL
Specifications Installation
Page 1
Information for the Product user:
1. Please note the requirement to dispose of Waste Electrical & Electronic Equipment separately from household waste (WEEE marked with
crossed out wheelie bin symbol).
2. Please consider your role in contributing to re-use and recycling by returning this product at end of life to a collection centre for waste electrical
equipment or a Civic Amenity site, or to a retail outlet from which you are purchasing a replacement.
3. This equipment may contain substances that are hazardous to health and the environment if disposed of carelessly. It is important that it is
separated from normal household waste and recycled in the WEEE chain
4. The “crossed out wheelie bin symbol” on a product indicates this equipment must not be disposed of in normal household waste, but should be
disposed of according to local WEEE regulations
The Installation must be carried out by an electrician
LED Group
Western Retail Park Tel: [phone]
Nangor Road Fax: [phone]
Dublin 12 Email: [email protected]
Ireland Website: www.led.ie
ISO 9001:2008
Q UAL IT Y ASSU RE DCO MPAN Y

LED Group
Western Retail Park Tel: [phone]
Nangor Road Fax: [phone]
Dublin 12 Email: [email protected]
Ireland Website: www.led.ie Page 2
12
34
56
LN
ISO 9001:2008
Q UAL IT Y ASSU RE DCO MPAN Y
435mm 150mm
565mm
212mm
106mm
Installation diagram
The Installation must be carried out by an electrician