Robus RP50LEDF-04 User manual

Specication:
Installation:
Information for the Product user
1. Please note the requirement to dispose of Waste Electrical & Electronic Equipment separately from household waste (WEEE
marked with crossed out wheelie bin symbol).
2. Please consider your role in contributing to re-use and recycling by returning this product at end of life to a collection centre for
waste electrical equipment or a Civic Amenity site, or to a retail outlet from which you are purchasing a replacement.
3. This equipment may contain substances that are hazardous to health and the environment if disposed of carelessly. It is
important that it is separated from normal household waste and recycled in the WEEE chain
4. The “crossed out wheelie bin symbol” on a product indicates this equipment must not be disposed of in normal household waste,
but should be disposed of according to local WEEE regulations
Issue 1 181213
OLYMPIC LED FLOOD LIGHT
RP50LEDF-04
Please read instructions before commencing installation and retain
for future reference.
Model No. RP50LEDF-04
Supply Voltage: 110-240V~50/60Hz
Power Consumption: 50W
Lumen Output: 3500lm
Colour Temperature: 4500K
CRI: 70
Beam Angle: 100
o
Power Factor: >0.95
Operating Temp Range:
-15
o
C < Ta < 40
o
IP Rating: IP65
Safety Classification: Class I,Must be Earthed
Dimensions(mm): (W)320X(H)395X(D)103
Weight: 4.2Kg
Warranty: 5 year
Compliance with: EN55015,EN60598-1,EN61000-3-2,
EN61000-3-3,EN61347-2-13,EN61547
! Electrical products can cause death or injury, or damage to property. If in any doubt
about the installation or use of this product, consult a competent electrician.
1.Ensure mains supply is switched off before commencing work.
2.Select suitable location for luminaire.
3.Mark wall with appropriate fixing positions.
Before drilling, ensure that the hole does not impinge on pipe work, cables or
other building services.
4.Mount luminaire on wall.
5.The luminaire is supplied with 0.5m of rubber cable. Using suitable IP rated
enclosure terminate Brown (Live), Blue (Neutral) and Green/ Yellow (Earth) to
switch supply.
6. Luminaire must be connected to a circuit controlled by an RCD.
7. This product has no user serviceable parts. If any part is damaged, disconnect
from mains and discontinue use.
Note: No “fixings screws provided”,please use appropriate fixings screws.
The Installation must be carried out by an electrician
LED Group
Western Retail Park Tel: [phone]
Nangor Road Fax: [phone]
Dublin 12 Email: [email protected]
Ireland Website: www.led.ie
Page 1
ISO 9001:2008
Q UAL IT Y ASSU RE DCO MPAN Y

With 0.5m
of rubber cable
Installation diagram:
The Installation must be carried out by an electrician
LED Group
Western Retail Park Tel: [phone]
Nangor Road Fax: [phone]
Dublin 12 Email: [email protected]
Ireland Website: www.led.ie Page 2
Figure 1 Figure 2
Figure 3 Figure 4
Figure 5 Figure 6
Brown
LN
BlueY./G.
Using suitable IP
rated box
H
WD
320mm
395mm
103mm
120mm
60mm
ISO 9001:2008
Q UAL IT Y ASSU RE DCO MPAN Y
Mark wall with
appropriate fixing
positions.
Knock expansion bolt into
wall with hammer
A
B
Remove nut from bolt
Mount luminaire on wall