Rocam Cr1001e User manual

- 02 -- 01 -Chapter 1 LOCATION OF CONTROLS2017191821912345678131410111215161.Set Time Button 2.Hour Button 3.Minute Button4.Dimmer Button 5.SNOOZE Button 6.Alarm Pause Button7.Alarm OFF Button 8.Alarm 1 Button 9. Alarm 2 Button10. PM Indicator 11.Alarm 1 Indicator12.Alarm 2 Indicator 13.DST Indicator14.12/24H & DST Button 15.Volume + Button16.Volume - Button 17.Battery Door18.USB Port 19.DC Jack20.Speaker 21.Holder ( x 2pcs) Note: Battery is not includedChapter 2 POWER RESOURCES1. Install 2pcs 1.5V “AAA” size batteries to the proper terminals in the battery compartment to memorize the time setting in case of power outage.NOTE: Batteries(not included) don't support time display but can back up time & alarm setting and trigger an alarm in case of AC power failure.2. Connect the adapter line to DC jack , then plug into a 100~240V AC wall power outlet.Chapter 3 TIME SETTINGSETTIMEHOURMINSETTIME12/24H &DST1. Press button once, display starts flashing.2. Press button to set the hour. press button to set the minute.3. Press button or button to save time or wait for another 5 seconds to confirm automatically.To change 12H/24H time formatPress button to change 12H/24H time format.

ROCAM

RCR1001EAlarm Clock with USB Charger CREATE YOUR PERFECT SLEEP ENVIRONMENTVersion 1.0 Made in ChinaHttp://www.yelaw.net[email protected]Speak with our Experts+1 (240) 514-4451Mon-Fri: 9:00am ~01:00pm PST 8:00am ~12:00pm PST

SNOOZE

- 05 -- 06 -- 04 -- 03 -Chapter 3 ALARM SETTING 11Turn off AlarmWhen alarm goes off:1. Press button to temporarily turn off alarm for 9 minutes. Alarm will ring every next 9 minutes.2. Press button to turn off alarm for 24 hours. The alarm indicator or is still on, which means alarm is still activated and will ring after 24 hours.3. Cancel Alarm Press button to turn off alarm1 or alarm 2 permanently. And corresponding indicator or will turn off. If alarm 1 goes off, then press button, just turn off alarm1 permanently. indicator (11) will turn off . If alarm 2 goes off, then press button, just turn off alarm 2 permanently. indicator (12) will turn off. 21. Press button, the alarm indicator (11) will light up, the display starts flickering.2. Press button to set the hour, press button to set the minute.3. Press button or button to save alarm time or just wait for another 5 seconds to confirm automatically.4. Push or button to adjust alarm volume.Setting ALARM 2 is the same as ALARM 1.ALARM11VOL+VOL-HOURMINALARM12ALARMOFFALARMOFFALARMOFFALARMPAUSEChapter 6 USB CHARGINGPlug charging cable into device such as phone or tablet.Device can charge both your phone or tablet at the same time.The maximum charge current is 1 Ampere.

22:23

89%

Chapter 4 DIMMERRepeat button to adjust the brightness of display for your preference.There is 5 levels, The sequence is as follows:01-02-03-04-05-04-03-02-01........DIMMER12/24H &DSTHold press button to switch DST function.