ROCAM CR1023 User manual

Version 1.0Digital Alarm Clock with USB ChargerTHE BEST DECORATION FOR BEDROOM Made in China12345678Chapter 1 LOCATION OF CONTROLS10111213- 01 -1. DISPLAY DIMMER KNOB 2. TIME/DST BUTTON 3. 12/24H BUTTON 4. ALM ON/OFF BUTTON 5. ALARM 1 BUTTON 6. ALARM 2 BUTTON 7. VOLUME KNOB 8. TYPE-C CHARGING PORT 9. NIGHT LIGHT 10. SPEARK 11. DC IN JACK 12. USB CHARGING PORT 13. BACKUP BATTERY COMPARTMENT 14. DST INDICATOR 15. PM INDICATOR 16. AM INDICATOR 17.LOW DIMMER INDICATOR 18. ALARM 1 INDICATOR 19. ALARM 2 INDICATOR 20.TOUCHSCREEN SNOOZE / NIGHT LIGHT141516171819209- 02 -Chapter 2 POWER SOURCES1. Install 2pcs 1.5V “AAA” size batteries to the proper terminals in the battery compartment to memorize the time setting and the alarm will ring in case of power outage. NOTE: Batteries are not included and don’t support time display or any other functions 2.Connect the adapter line to DC jack , then plug into a 100~240V AC wall power outlet.Chapter 3 TIME SETTING1. Press button once, the hour display indicator light starts flickering on the screen. 2. Press or button to set the hour, and press to confirm.3. After step 2, minute display start flickering, press or button to set the minute. 4.Press button to save time or wait for another 10 seconds to confirm automatically.Hold press button to change 12H/24H time format.12H/24H time format settingContact our experts[email protected]http://www.yelaw.net
ROCAM
R

22:23
2
89%
EE
1
- 04 -- 03 -- 05 -- 06 -Chapter 4 ALARM SETTING1. Press the button one time, the indicator light on and flickering along with hour display on the screen. 2. Press or button to set the hour, and press to confirm.3. After step 2, minute display start flickering, press or button to set the minute. 4. Press button to save setting or wait for another 10 seconds to confirm automatically.ALARM 2 setting same as ALARM 1Alarm Ring Volume SettingThere is 7 volume levels, rotate left to turn up, right to turn down. Adjust the volume for your preference. When alarm goes off:1. Press button to temporarily turn off alarm for 9 minutes. Alarm will ring every next 9 minutes.2. Press button to turn off alarm for 24 hours. The alarm indicator or is still on, which means alarm is still activated and will ring after 24 hours.3.When alarm is off, press or button to active the alarm, setting will be the same as last timeTurn off Alarm1. Hold press button to turn off alarm1 and alarm 2 permanently. And corresponding indicator and will turn off.2. Hold press button, just turn off alarm 1 permanently, indicator will turn off. 3. Hold press button, just turn off alarm 2 permanently, indicator will turn off.4. If alarm 1 goes off, then hold press or , just turn off alarm1 permanently, indicator will turn off .5. If alarm 2 goes off, then hold press or , just turn off alarm 2 permanently, indicator will turn off. Cancel Alarm Chapter 5 NIGHT LIGHTTouch the button to turn on the night light.Press the button again to turn off the night lightChapter 6 DIMMERRotate the DIMMER button to adjust the display to a comfortable brightness. There is 7 dimmer levels, rotate left to turn up, right to turn down. Adjust the brightness for your preference.NOTE : Rotate the button to the end of right, LOW DIMMER indicator display on screen, gone by 20 seconds. Time will be display again when you rotate the button to the left.Chapter 7 DSTHold press button to switch DST function. DST indicator will turn on.Hold press button again to turn off DST function. DST indicator will turn off.Chapter 8 USB & TYPE-C CHARGINGPlug charging cable into device such as phone or tablet.Device can charge both your phone or tablet at the same time.The maximum charge current is 1 Ampere.
22:23
2
89%
EE
1