ROCK SOLID SUPPLY Fixed Mount User manual

ROCK SOLID DEPENDABILITY
ROCK SOLID FEATURES
Built in light adapter
Use light adapter port to mount an optional light
for use in low light situations. Designed to only
illuminate the pins, keeping the target
sharp in the shooters eye.
Mounting
Mount the sight to the bow in one of two positions with
the bow mounting screws provided.
Sighting In (20 yards recommended)
Set the top pin in the preferred position in the bezel
(using the hex key provided). Next, unlock the Tool Free
Locking Knobs, allowing the Micro Adjust Windage and
Elevation Dials to rotate. Rotate the Micro Adjust Windage
and Elevation Dials to precisely tune pin placement.
Once pins are in the desired location, lock the Tool Free
Locking Knobs.
* Move pins in the same direction of desired arrow
placement
i.e. If missing left, adjust pins left. If missing low,
move pins down
Micro Adjust Windage and Elevation Dials
The Micro Adjust Windage and Elevation Dials allow
the shooter to make small, consistent, and accurate
adjustments as needed. They are also useful tools for
precision sight in.
2nd and 3rd Axis Adjustments
Designed to further accommodate shooters sight
alignment preferences.
2nd Axis Adjustment
Loosen/Tighten screws to
adjust the 2nd axis of the sight.
3rd Axis Adjustment
Loosen/Tighten screw and pivot the level
to adjust the 3rd axis of the sight.
AL ALUMINUM BUILT
Elevation Dial
The laser etched Elevation Dial
precisely adjusts the pins up and
down. (clockwise moves pins down,
counter clockwise moves pins up)
Windage Dial
The laser etched Windage Dial precisely adjusts
the pins left and right. (clockwise moves pins left,
counter clockwise moves pins right)

AL
ROCK SOLID FEATURES
ALUMINUM BUILT
ROCKY MOUNTAIN
1. Multi-Position Mount/Quiver Holes
2. Tool Free Micro-Adjust Windage and Elevation Knobs
* Laser Etched Windage and Elevation Markers
3. Tool Free Locking Knobs
4. 2nd and 3rd Axis Adjustable
5. Pin Adjustment
6. Fully Contained Fibers
7. Built-In Light Adapter
1. 2.
3.
4.
5. 6.
7.
Mount Holes
Quiver Holes
2nd Axis
3rd Axis
Fixed Mount INSTRUCTIONS
Elevation
Windage