Rocket Espresso Conti Valerio Fausto User manual

USER MANUAL
MACINATORE
FAUSTO

Pg 01
CONTENTS
• General information 02
• Removing machine from packaging 03
• Safety instructions 04
• Technical data 06
• Other information 07
• Appliance description 08
• Setting up your Fausto 10
• Locking the container 11
• Introduction 12
• Instructions for use 13
• Grind setting 14
• Appliance setting 15
• Switching on your Fausto 16
• Function block 18
• Cleaning and maintenance 19
Congratulations on purchasing purchasing the Fausto Grinder
by Conti Valerio for Rocket Espresso Limited.
ROCKET ESPRESSO -WARRANTY AND REGISTRATION
Warranty is with the dealer from whom you purchased the machine.
To register your purchase with Rocket Espresso, please go to
www.rocket-espresso.com/register.html and enter the following details:
• Name:
• Country:
• Place of purchase:
• Serial number of the machine:
• Email address:

Pg 02 Pg 03
REMOVING MACHINE FROM PACKAGING
1. Ensure that there are no signs of damage to the machine by
checking the external cladding of the packaging.
2. Check the machine for signs of damage once the packaging has
been carefully removed.
3. Keep the packaging ( boxes, foam, plastic bags) well away from
the reach of children.
4. If there is evidence of defect of damage to the machine, the
authorised dealer from whom you purchased the machine should
be notied immediately so that remedial action can be taken.
GENERAL INFORMATION
This user manual is an essential part of the safe operation of your
Fausto Grinder, therefore is is important that you read the enclosed
warnings and precautions carefully.
Particularly information concerning the safety during installation,
operation and cleaning. Please keep this manual in a safe place
where it can be made available to all users.
Rocket Espresso can not be held liable for any damage to people or
property resulting from failure to respect the instructions concerning
safety, installations and maintenance contained in this manual.

Pg 04 Pg 05
SAFETY INSTRUCTIONS
The design of this machine has taken into account all reasonable
user safety precautions. Nevertheless particular conditions of
installations and handling may create unforeseen situations beyond
the installers control.
1. Check to see that the data on the rating plate corresponds to
that of the main electrical supply to which the machine will be
attached.
2. The installation and repair must conrm to local electrical safety
codes and regulations.
3. This machine is only safe when it has been correctly connected to
an efcient earthing/grounding system.
4. We do not recommend the use multiple adaptors and extension
cords .
5. Do not use this machine if there is damage to its cord, plug or if
any part of the machine malfunctions. Return the machine to the
nearest authorised service facility for examinations, repair or
adjustment.
6. The machine has been designed for the sole use of grinding
roasted coffee beans. Any other use must be considered
improper and therefore dangerous. The manufacturer shall not
be held responsible for any damaged caused by inappropriate
use.
7. To protect against electric shocks when using any electrical
appliance including your Fausto Grinder
a. Do not immerse the machine itself , cord and plugs in water or
other liquid and do not let the machine’s internal parts get in
contact with liquid.
b. Prevent the power cable from being stretched or pulled tight.
c. Do not use the machine with wet hands.
d. Do not allow children or untrained persons to use the
machine.
e. Do not operate the machine when bare foot.
f. Always unplug the machine form the power supply before
performing any cleaning and or maintenance operations.
g. Do not leave the machine switched on when not in use.
h. Do not obstruct the ventilation and or heat dissipation
openings and or slits not introduce water or any other liquid
into same.
i. Always switch off the appliance before removing blockages
from the pouring lip.
j. Never insert spoons, forks or other utensils into the dispensing
funnel, see (10) on page 09 or into the coffee bean container,
see (7) on page 09.
k. Should a foreign body stop the motor, switch the machine off
immediately and contact an authorised dealer and or service
centre.
8. The machine is not designed for use in extreme temperature.
Operate within a -5°c to +30°c range
9. This appliance must not be used by children or people with
reduced physical, sensorial or mental abilities. It must also never
be used by people without the necessary skills and experience
unless under supervision or during training.
10. Do not allow children to play with this equipment at any time.
11. The user must respect the general safety regulations in force in
the country in the the machine is being used as well as the rules
of common sense and shall be responsible for ensuring periodic
maintenance is performed.
12. The owner is responsible for checking the machine is installed in
tolerable environmental conditions such as to not create a health
or safety hazard for those using the machine.

Pg 06 Pg 07
DESCRIPTION
VOLTAGE (V) 110 220 230 240
FREQUENCY (Hz) 60 60 50 50
POWER CONSUMPTION (W) 400 300 500 245
MOTOR POWER (W)* 245 235 246 246
RPM 1650 1630 1290 1290
PRODUCTIVITY (G/H) 10 10 9.5 9.5
WEIGHT WHEN EMPTY 10 10 10 10
HEIGHT (MM) 441 441 441 441
WIDTH (MM) 172 172 172 172
DEPTH (MM) 262 262 262 262
TECHNICAL DATA OTHER INFORMATION
*The value given is for the actual revolutions of the burrs Activation times:
*Ton: 120 sec. *Toff: 900 sec.
MANUFACTURER
Conti Valerio
Via di Colonnata
1 - Sesto Fiorentina
Firenze
Italy
COFFEE GRINDER MODEL
RRT65E

Pg 09
6
7
8
9
10
11
12
APPLIANCE DESCRIPTION
1. LCD Display
2. Decreasing Key
3. Luminous key for single coffee dose
4. Increasing key
5. Luminous key for double coffee dose
6. Container cover
7. Coffee bean container
8. Coffee bean container opening/closing tab
9. Grinding adjusting knob
10. Dispensing funnel
11. Filter holder fork
12. Power ON switch
1
2
3
4
5
Pg 08

Pg 10
SETTING UP YOUR FAUSTO
MACHINE UNLOCK
1. Before starting the grinder operation, unscrew and remove the
white lock screw under the machine (turn anti-clockwise).
17
Pg 11
13
LOCKING THE CONTAINER
Before starting the appliance it is necessary to t the coffee
bean container (7) and t the portalter holder fork (11).
• Insert the bean container (7) into its seat positioning so
that the hole lines up.
• Tighten the lock screw (13).
• Place the portalter holder fork (11) onto the machine and fasten
with provided screws. There is a little exibility with height.
11

Pg 12 Pg 13
INTRODUCTION
It is necessary to set up the appliance before operating by
determining the correct grind required to create a perfect extraction.
1. An espresso grind is a very ne grind yet still granular.
2. Coffee loses its avour rapidly once ground and therefore only
grind as much as is needed for the espresso you are about to
prepare.
3. Temperature, humidity and waring of the grinder burrs all affect
the accuracy of the grind setting, therefore each morning you
may nd you need to “dial in “ your grinder ( make the grind
setting coarser or ner). This will be the difference between good
coffee and great coffee.
4. Ensure that your dosing and tamping is consistent.
5. Good extraction is characterised by a 5 - 10 second delay, before
any coffee will pour. Heavy droplets will appear and develop into
a thick, straight and even pour. The colour will be dark brown or
hazelnut, preferably with a reddish reection.
6. The pour should be stopped before colour lightens and the pour
begins to curl in.
7. If the ow is too fast ( another sign will be a pale crema and white
streaks) Then adjust your grind and make it ner - rotate the
adjusting knob clockwise.
8. If the ow is too slow the grind is too ne. Adjust the grind and
make is coarser. - rotate the adjusting knob anticlockwise.
9. Correct grind equals correct extractions equals correct avour.
INSTRUCTIONS FOR USE
1. Plug in the machine and close the push tab at the bottom of the
bean container.
2. Fill the bean container with coffee beans
3. Press the power on button (12) that must light up
4. Pull the tab out a little to permit the passage of the beans
5. Place the portalter onto the fork (11) underneath the dispensing
tunnel.
6. Select the single (3) or double (5) dose illustrated with one
cup or two cups on the LCD display
7. Dispensing/grinding stops once the preset time has elapsed or
if you want stop the grinding sooner press the key (3) or (5)
again.
3511
12

Pg 14
13
17 2018
16 19
14 15
GRIND SETTING
Set the grinder by means of the adjusting knob (9) by rotating it
clockwise to make powder ner or anticlockwise to make it coarser.
To start, grind some coffee off into the portalter and make a coffee.
This will give you the initial understanding of what the setting is like in
relation to the coffee.
Change the setting when the grinder is operating 1 - 2 notches at a
time. The difference between the notches will relate to 3 - 5 seconds
in extraction time.
APPLIANCE SETTING
13. Dispensing time of present ‘single’ coffee dose.
14. Continuous dispensing enabled.
15. Dispensing time of present ‘double’ coffee dose.
16. Dispensing image of ‘single’ coffee dose.
17. Counter of dispensed ‘single’ coffee dose.
18. Padlock (locked programming).
19. Dispensing image of ‘double’ coffee dose.
20. Counter of dispensed ‘double’ coffee dose.
9
Pg 15

14
Pg 17
SWITCHING ON YOUR FAUSTO
When switching the appliance on for the rst time, it is congured
in the mode set by the factory and it will maintain the last mode
previous to switch off.
When switching the appliance on, the LCD screen will display the ‘R’
graphic for approximately 7.5 seconds.
DOSE DISPENSING AND SETTING DISPLAY
• Place the portalter on the lter hold fork.
• Press the key image of one cup or two cups.
• The key will illuminate and the coffee will be ground and
dispensed into the portalter.
• Once grinding has been completed, the zero returns to set value
• The grind time can be increased by pressing the (2) key or
decreased by pressing the (4) key.
CONTINOUS DISPENSING MODE ACITIVATION
If you press both cup images (3) and (5) simultaneously the
continuous mode is activated.
Both dose keys light up and continuous grinding symbol
appears (14)
By pressing one of the keys (3) or (5) you return to the
automatic mode of dose selection.
DOSE COUNTER ZEROING
By pressing both key (2) and (4) for more than 5 seconds both
dose counters are reset to zero.
2
3
4
5
Pg 16

Pg 18 Pg 19
FUNCTION BLOCK
By pressing both keys (2) and (4) and releasing them, all
functions are blocked except the dose selection and the dispensing
start. The display will show the lock symbol (18)
To unlock press both keys (2) and (4) and when you release
them all functions will be unlocked.
24
18
CLEANING AND MAINTENANCE
Unplug the appliance before performing any cleaning and
maintenance operation.
Do not pull the power cable or the appliance itself to
disconnect the plug from the power supply socket.
CLEANING
Cleaning is a basic aspect for the proper functions of the coffee
grinder with a dosing unit.
Before cleaning make sure the appliance is unplugged.
At least once a week clean the coffee bean container (7) removing
the oily coat left by the coffee beans with a clean cloth.
Check old coffee is not being trapped in the dispenser and brush out
the old coffee. If left this can change the taste of the coffee and give
a rancid taste to your coffee. Brush out coffee from the burrs.
MAINTENANCE
Maintenance is only to be
performed by skilled personnel
authorised by the manufacturer.
Do not carry out improvised or
precarious repairs and only use
original spare parts.
In order to ensure proper
functioning of the appliance,
check and eventually replace
the blades (burrs) every 350 kg
of coffee ground for new blades.

Pg 21
EC DECLARATION OF CONFORMITY
Pg 20

ROCKET ESPRESSO LIMITED
VIA CURIEL 1 3
20060 LISCATE
MILAN, ITALY
[phone]
WWW.ROCKET-ESPRESSO.COM