
ENGLISH 12-0880
Using your shutter remote
1Press the shutter release button
halfway for the camera to focus.
2After the focus indication appears in
the viewnder, fully press the shutter
release button to shoot the picture.
Note: When the subject is in a dim
environment where it’s dicult to use
auto-focus, set the camera on MF
(manual focus) mode and rotate the
focus ring to focus the shot.
Shutter lock function
In B (Bulb) mode or continuous shooting
mode, shutter lock is available. To enable
it, fully press the shutter release button
and slide it in the direction of the arrow.
• When locked in B (Bulb) mode, the
camera shutter remains opened for
time exposure.
• When locked in continuous shooting
mode, the camera shutter continually
operates for continuous shooting.
Specications
One-year limited warranty
Visit www.rocketshproducts.com for
details.
Contact Rocketsh:
For customer service, call 1-800-620-2790
www.rocketshproducts.com
© 2012 BBY Solutions, Inc. All Rights Reserved.
Distributed by Best Buy Purchasing, LLC
7601 Penn Avenue South, Richfield, MN USA 55423-3645
ROCKETFISH is a trademark of BBY Solutions, Inc. All other
products and brand names are trademarks of their respective
owners.
RF-UNISR1 COMPATIBILITY LIST
C1 C3 N1 S1
Canon models Nikon models Sony models
EOS 60D EOS 10D D3 DSLR-A100
EOS 60Da EOS 20D D2 series DSLR-A200
EOS Digital Rebel EOS 20Da D1 series DSLR-A300
EOS Digital Rebel XT EOS 30D D700 DSLR-A350
EOS Digital Rebel XTi EOS 40D D300 DSLR-A450
EOS ELAN 7/7E EOS 50D D200 DSLR-A500
EOS ELAN 7NE EOS 5D D100 (MB-100
battery unit
required)
DSLR-A550
EOS Elan 7N EOS 5D Mark II F6 DSLR-A560L
EOS Elan II/IIE EOS 5D Mark III F5 DSLR-A580
EOS IX Lite EOS 7D F100 DSLR-A700
EOS Rebel 2000 EOS D30 F90X DSLR-A900
EOS Rebel GII EOS D60 F90 SLT-A33L
EOS Rebel T1i EOS-1D SLT-A55
EOS Rebel T2 EOS-1D Mark II SLT-A77
EOS Rebel T2i EOS-1D Mark II N
EOS Rebel T3 EOS-1D Mark III
EOS Rebel T3i EOS-1D Mark IV
EOS Rebel T4i EOS-1D X
EOS Rebel Ti EOS-1Ds
EOS Rebel XS EOS-1Ds Mark II
EOS -Rebel XSi EOS-1Ds Mark III
RFD-T1l EOS-1v
EOS-1v HS
EOS-3
Terminal type
Dimensions
Cord length
Net weight
C1/C3/N1/S1 (one out of four)
Approx. .35 × 3.82 × .83 in.
(29 × 97 × 21 mm)
(Cord not included)
Approx. 39.4 in (1 m)
(Terminal included)
Approx. 1.76 oz. (50g)
*Product design and specications are
subject to change without notice.