Rocket Fish RF-GPS31102 User manual

Safety
• Warning: Some medical studies have suggested that long periods of repetitive motion
may be linked to certain types of physical discomfort or injuries. You should take frequent
breaks during game play. If you feel aching, numbness, or tingling in your arms, wrists, or
hands, consult a qualied health professional.
• Warning: The starter kit contains small pieces that may pose a choking hazard to small
children. Keep the kit components away from small children.
• Warning: To prevent re or shock hazard, do not expose the starter kit to rain or moisture.
• Warning: Never insert objects into the starter kit components, because they may touch
dangerous voltage points or short out parts, which can result in re or electrical shock.
• Caution: Do not disassemble or damage any of the starter kit components. Refer all
servicing to qualied personnel.
• Caution: Keep the starter kit out of direct sunlight for extended periods of time.
• Caution: Use the starter kit only as instructed. Read all instructions before operating.
• Caution: The wall adapter (AC) must not be used to power the charger if the plug or cord
is damaged. The plug must be easily unplugged from the wall outlet.
Package contents
• Dual charge station (for PS3 controllers only)
• Dual charge station AC power adapter
• Bluetooth headset
• Headset ear clip
• Headset USB charge cable
• Console stand (for PS3 2nd generation“slim”console model only)
• Quick Setup Guide
• Not included: PS3 controllers
RF-GPS31102
Using the dual charge station
Charging your controllers:
1Plug the AC power adapter into any available AC power outlet.
2Connect the AC power adapter’s USB connector to the dual charge station.
3Attach the Sony PS3 controllers to the charge station. The blue charging
indicator on the charge dock lights up when the controller is connected.
QUICK SETUP GUIDE
PS3 Starter Kit Indicator status:
• The LED indicators on the front of the controllers ash while charging and
turn o when fully charged.
• The blue LED indicator on the charge doc remains on while a controller is
attached to the charge station, regardless of the controller’s recharging status.
Using the Bluetooth headset
1Multifunction button 4Volume up and down
2Indicator 5Clip
3Microphone 6Charging connector
The Bluetooth headset must be fully charged before using it for the rst time.
To charge the headset:
1Connect the charge cable to the charging connector on the headset.
2Connect the charge cable to the PS3 or any standard USB port. The indicator
on the headset turns red while charging and turns blue when fully charged.
3Disconnect the charge cable from the headset when the headset is fully
charged.
Charging indicator
Charging indicator

To pair the headset with the Playstation 3:
1Make sure that the Bluetooth headset is turned on.
2On the Playstation 3, open the Main menu, then go to Settings, Accessory
Settings, Manage Bluetooth Device, then locate the Bluetooth device
settings.
3Press and hold the multifunction button on the Bluetooth headset until the
headset beeps and the headset’s indicator ashes red and blue.
4On the Playstation 3, select Yes to conrm, then select Start Scanning.
5When you’re asked to verify the Bluetooth headset model, select SX-919i
from the Bluetooth devices list.
6Select Enter to conrm, enter the pass key (0000), select Start, then select OK
to conrm the connection.
If the pairing is unsuccessful, repeat the previous steps until successful.
7From the Playstation 3’s Main menu, select Settings, then select Accessory
Settings.
8Select Audio Device Setting, then select SX-919i from the Input device list.
9Select SX-919i from the Output device list, then select OK to conrm the
setting.
Using the console stand
1Place the console stand on a smooth, at surface.
2Insert the Playstation 3 console vertically onto the
console stand.
NOTE: This stand is designed to only work with 2nd generation
PS3“slim” consoles
Legal notices
FCC Part 15
This device complies with Part 15 of the FCC Rules. Operation of this product is subject to
the following two conditions: (1) this device may not cause harmful interference, and (2)
this device must accept any interference received, including interference that may cause
undesired operation.
Canada ICES-003 statement
This Class B digital apparatus complies with Canadian ICES-003.
90-day limited warranty
Visit www.rocketshproducts.com.
Contact Rocketsh:
For customer service please call 1-800-620-2790
www.rocketshproducts.com
Distributed by Best Buy Purchasing, LLC
7601 Penn Avenue South, Rich eld, Minnesota, U.S.A. 55423-3645
© 2010 BBY Solutions, Inc.
All rights reserved. ROCKETFISH is a trademark of BBY Solutions, Inc. Registered in some
countries. All other products and brand names are trademarks of their respective owners.
ENGLISH 09-1170