Rockford Fosgate RFX-8140 Installation and operating manual

®®
Installation Reference Sheet
Páginas de Referencia para la Instalación
Schéma d’Installation
Installations Beiblatt
Istruzioni di Installation
RFX-8140

AM / FM ST / CD Player / CD Changer Controller
Detachable Faceplate w/IR Remote
RFX-8140 Specification
Reference
Sheet
RFX-8140
®®
AUD SEL
6
RDMRPTSCAN PAUSED.SCN DIM
43 521
P.SCN LOUDDSPL
CLOCK ILLUM
PWR
AUTO
VOL TUNE
COMPACT
DIGITAL AUDIO
GENERAL
•ISO Mountable –178mm x 50.4mm (trim ring removed)
•SMART-On (Sequentially Managed Accessory Remote
Turn-On) Separate turn-on leads for amplifiers and signal processors
that protect speakers and electronics from damaging transients
•Any Button Wake-Up
•Clock
•Cell Phone Mute
•Switchable Loudness –Enables bass response to be boosted at
low listening levels
•IR Remote Compatible w/ Pulse –Ability to operate
functions via remote control as well as trigger external devices (amp
racks, neon lights, etc.)
•Dimmable Dual Color Illumination –Green or Amber color
•Smart Power Antenna Output
AUDIO phile PREAMP
•Low Source Impedance –Enables multiple amplifiers to be
driven without signal loss
•2-ch BAL/RCA Pre-Out –6-pin Balanced or RCA
FEATURES
•Source Tone Memory –Enables separate Bass and Treble
memory for different formats
•Dual External Audio Inputs –Allows the source unit to play
additional audio sources (VCR, video game, etc.)
•Signal Processor Loop –Allows an external processor to be
inserted before the source unit’s volume control
TUNER
•Gen 3.2 w/patented Digital Automatic Alignment
•MIR (Multipath Interference Rejection) –Improves audio
performance when radio reception is poor
•World Wide Tuner –America/Europe/Aust/Saudi
•24 Station Presets –6AM/18FM Presets
•Auto Store –Auto programming of all 24 presets
COMPACT DISC
•5.0 Hologram laser w/multi-damping
•Dual 1 Bit D/A Converters w/8x Oversampling
•Digital Servo Control w/Auto Focus –Adjusts to CD
manufacturing tolerances for accurate tracking
SPECIFICATIONS
FM TUNER
Frequency Response ................................. 30Hz –15kHz
Usable Sensitivity..........................................20dB @ 1uV
Alternate Ch. Selectivity ........................................... 90dB
Adjacent Ch. Selectivity ........................................... 50dB
50dB Quieting Sensitivity........................................ 18dBf
Signal-to-Noise Ratio ............................................... 72dB
Channel Separation...................................≥25dB @ 1kHz
Capture Ratio ................................................ 2.6 @ 45dBf
CD PLAYER
Usable Discs ..................................................... 5”and 3”
Frequency Response ...................... 20Hz –20kHz (±2dB)
Signal-to-Noise Ratio .............................................>90dB
Channel Separation.................................................. 86dB
Dynamic Range ..................................................... 100dB
AM TUNER
Sensitivity.......................... 31dBf max. @ 10dB sensitivity
–6dB Bandwidth ....................... 5kHz min. –12kHz max.
GENERAL
Operating Voltage ............................... +10.5 to +16V DC
Pre-Out Voltage (vol. max.) ................................ 8.5 Vrms
Preamp Output Impedance ....................................... 50Ω
Equalization ....................................... Bass ±8dB @ 60Hz
Treble ±10dB @ 10kHz
Chassis Dimensions ........................... 7"W x 63⁄8"D x 2"H
(178mm x 162mm x 50.4mm)
Nosepiece Dimensions ................... 71⁄16"W x 7⁄8"D x 2"H
(179.7mm x 22.2mm x 50.4mm)
Weight ...................................................3.46 lbs. (1569g)
IR REMOTE
Dimensions............................... 29⁄16”W x 33⁄4”L x 3⁄4”H
(6.51cm x 9.53cm x 1.9cm)
®®
Specifications subject to change without notice
®
1-6
+
–
®

AM / FM ST / CD Player / CD Changer Controller
Detachable Faceplate w/IR Remote
Installation
Reference
Sheet
Antenna
Minimum & Maximum
Mounting Angle
20°
20°
Antenna
Input
Turn-On “B”= Amplifier(s)
Turn-On “A”= Signal Processor(s)
®®
1-6
+
–
IR Remote
RFX-1110
Press “Diamond R”
Button to Pulse
Turn on “C”
Battery Replacement
(2) CR2032
Ext Aud-1 (L–)
Ext Aud-1 (L+)
3
45 67 89 10
1
2
(Looking into the
Radio Connector)
DIN (R–)
DIN (R+) DIN (L GND) DIN (R GND) DIN (L–) DIN (L+)
10
9
8
7
6
5
4
3
2
1
Balanced DIN Harness
Ext Aud-1 (R–)
Ext Aud-1 (R+)
Power Harness
(Looking into the Radio Connector)
22 21 20 19 18 17 16 15 14 13 12
1110987654321
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
N/C
Turn-On “B”
Turn-On “A”
Turn-On “C“
Audio Mute
Ex Audio-2
Sig. Processor Loop IN (R–)
Sig. Processor Loop OUT (R–)
Sig. Processor Loop IN (L–)
Sig. Processor Loop OUT (L–)
Chassis Ground
(Blue/White)
(Lt. Blue)
(Blue/Red)
(Brown)
(Green/White)
(Black)
N/C
Dimmer Out
Dimmer In
Ignition +12V
N/C
Pwr. Antenna
Sig. Processor Loop IN (R+)
Sig. Processor Loop OUT (R+)
Sig. Processor Loop IN (L+)
Sig. Processor Loop OUT (L+)
Battery +12V
(Orange/White)
(Orange)
(Red)
(Dk. Blue)
(Yellow)
+ L Signal
GND
Shield
+ R Signal
–R Signal –L Signal
NCNC
CD Changer/
Ex Audio-2 DIN
(Looking into the Changer DIN)
4321
8765
12 11 10 9
13
1
2
3
4
5
6
7
8
9
10
11
12
13
Right Signal (+)
Audio Common (–)
Left Signal (+)
Shield (Barrel)
Ground
N/C
N/C
N/C
N/C
Battery (+12V)
E&C Data
N/C
N/C
G
R
E
E
N
Ext. Aud-1 Input White (Left)
Bal. Aud. Output (6-pin DIN)
Ext. Aud-1 Input Red (Right)
Ext. Aud-1 (L–)
Ext. Aud-1 (L+)
3
45 67 89 10
1
2
(Looking into the Radio
Connector)
N/C
Right (+) Left (–) Right (–)N/C
Left (+)
10
9
8
7
6
5
4
3
2
1
RCA Harness
Ext Aud-1 (R–)
Ext Aud-1 (R+)
G
R
E
E
N
Ext. Aud-1 Input White (Left)
Audio Output White (Left)
Ext. Aud-1 Input Red (Right)
G
R
A
Y
Audio Output Red (Right)
Orange/White
Orange
Green/White
Brown
Blue/Red
Lt. Blue
Dk. Blue
Black
Signal Processor Loop (L) (Input)
Turn-On “C”(300mA Max) (Output)
(Pulsed 500ms)
Turn-On “B”(300mA Max) (Output)
(.5 sec DELAY ON –FAST OFF)
Turn-On “A”(2.0 Amp Max) (Output)
(FAST ON –.5 sec DELAYOFF)
Battery +12V (Input)
Ignition (switched +12V) (Input)
Chassis Ground (Input)
Yellow
Red
Power Antenna (300mA Max) (Output)
10A Fuse
The External Signal Processor
Loop is defaulted to the
BYPASS position.
To ENABLE the External
Signal Processor Loop,
remove the bottom cover and
adjust the selector switch.
Blue/White
Signal Processor Loop
BYPASS
ENABLE
E
X
T
E
X
T
Radio
Remove Bottom Cover
22-pin harness 10-pin harness
External
Signal
Processor
OUTIN
Audio Mute (GND to activate) (Input)
Ex Audio-2 (GND to activate) (Input)
Dimmer In (+12V to activate) (Input)
Dimmer Out (External Control) (Output)
Signal Processor Loop (R) (Output)
Signal Processor Loop (L) (Output)
Signal Processor Loop (R) (Input)
®
RESET
RFX-8140
Instrument Panel Thickness Tabs to Bend
ABCDEFG
1.2mm to 2.5mm x x x
2.4mm to 3.5mm x x x
3.6mm to 4.5mm x x
4.6mm to 5.5mm x x x
5.6mm to 7.0mm x x
7.0mm to 12mm x x x
12.0mm to 15mm x x
Left Side View Right Side ViewTop View
G G C
CCB F A D E E D AF B C
FA-1609-A
FA-1614-A
FA-1613-A

AM/FM ST/Reproductor de CD’s/Controlador de Cargador de CD’s
Frontal Extraible con Mando a Distáncia Páginas de Referencia
para la Instalación
RFX-8140
Amplitud del panel Lengüetas a doblar
ABCDEFG
1.2mm to 2.5mm x x x
2.4mm to 3.5mm x x x
3.6mm to 4.5mm x x
4.6mm to 5.5mm x x x
5.6mm to 7.0mm x x
7.0mm to 12mm x x x
12.0mm to 15mm x x
Vista lateral desde
la Izquierda Vista lateral desde
la Derecha
Vista en planta
G G C
CCB F A D E E D AF B C
de instrumental
20°
20°
®®
Ext Aud-1 (L–)
Ext Aud-1 (L+)
3
45 67 89 10
1
2
DIN (R–)
DIN (R+) DIN (L GND) DIN (R GND) DIN (L–) DIN (L+)
10
9
8
7
6
5
4
3
2
1
Conector DIN
Balanceado
Ext Aud-1 (R–)
Ext Aud-1 (R+)
+ L Señal
Tierra
Blindaje
+R Señal
–R Señal –L Señal
NCNC
4321
8765
12 11 10 9
13
1
2
3
4
5
6
7
8
9
10
11
12
13
V
E
R
D
E
Ext. Aud-1 Entrada Blanco (Izquierda)
Salida Balanceada de Audio
(Conector DIN de 6 pines)
Ext. Aud-1 Entrada Rojo (Derecha)
Ext. Aud-1 (L–)
Ext. Aud-1 (L+)
3
45 67 89 10
1
2
N/C
Derecha (+) Izquierda (–) Derecha (–)N/C
Izquierda (+)
10
9
8
7
6
5
4
3
2
1
Ext Aud-1 (R–)
Ext Aud-1 (R+)
V
E
R
D
E
Ext. Aud-1 Entrada Blanco (Izquierda)
Salida de Audio Blanco (Izquierda)
Ext. Aud-1 Entrada Rojo (Derecha)
G
R
I
S
Salida de Audio Rojo (Derecha)
E
X
T
E
X
T
22 21 20 19 18 17 16 15 14 13 12
1110987654321
1
2
3
4
5
6
7
8
9
10
11
Conector de Alimentación
N/C
Encendido “B”
Encendido “A”
Encendido “C“
Silenciador de Audio
Audio Externo
Posterior (L–)
Posterior (R–)
Frontal (L–)
Frontal (R–)
Toma de tierra del chasis
(Azul/Blanco)
(Azul Claro)
(Azul/Rojo)
(Marrón)
(Verde/Blanco)
(Verde/Negro)
(Viloeta/Negro)
(Blanco/Negro)
(Gris/Negro)
(Negro)
N/C
Salida de Dimmer
Entrada de Dimmer
Alimentación +12V
N/C
Alimentación de la Antena
Posterior (L+)
Posterior (R+)
Frontal (L+)
Frontal (R+)
Batería +12V
(Naranja/Blanco)
(Naranja)
(Rojo)
(Azul Oscuro)
(Verde)
(Violeta)
(Blanco)
(Gris)
(Amarillo)
(Mirando hacia el Conector de la Radio)
12
13
14
15
16
17
18
19
20
21
22
Entrada de la Conexión del Procesador de Señal (L)
Entrada de la Conexión del Procesador de Señal (R)
Salida de la Conexión del Procesador de Señal (L)
Salida de la Conexión del Procesador de Señal (R)
Salida de Dimmer (Control Externo) (Salida)
Silenciador de Audio
(GND para ser activado)
(Entrada)
Encendido “C”(300mA Máx) (Salida)
(Pulsado 500ms)
Encendido “B”(300mA Máx) (Salida)
(Delay de 0.5 segundos conectado apagado Rápido)
Encendido “A”(2.0 Amp Máx) (Salida)
(Encendido Rápido Delay de 0.5 segundos desconcectado)
Batería +12V (Entrada)
Ignition (switched +12V) (Entrada)
Toma de tierra del Chasis (Entrada)
Entrada de Dimmer (+12V para ser activado)
(Entrada)
Fusible de
10 Amperios
Azul Oscuro
Naranja/Blanco
Naranja
Verde/Blanco
Marrón
Amarillo
Rojo
Azul Claro
Azul/Rojo
Azul/Blanco
Negro
Encendido “B”= Amplificadore(s)
Encendido “A”= Procesador de Señal
La conexión del Procesador
de Señal Externo, estáen
posición BYPASS por defecto.
Para Activar la conexión del
Procesador de Señal Externo,
saque la tapa y ajuste el
communtador como proceda.
Conexión del Procesador
de Señal
BYPASS
ACTIVADO
Radio
Saque la tapa superior
Conector de 22 pines
Procesador
de Señal
Externo
SALIDA
ENTRADA
Antena
Ángulos Máximo y
Mínimo para montaje
Entrada de
Antena
Cambiador de CD's/
Conector DIN EX Audio-2
(Mirando hacia el Cambiador de CD's)
Señal Derechal (+)
Común Audio (–)
Señal Izquierda (+)
Blindaje (Protección)
Tierra
N/C
N/C
N/C
N/C
Battería (+12V)
Datos E/C
N/C
N/C
(Mirando hacia el
Conector de la Radio)
Conector RCA
Mando a distancia
por Infrarrojos
RFX-1110
Pulse el botón R
Diamante para el
encendido “C”
Cambio de batería
(2) CR2032
1-6
+
–
®
(Mirando hacia el
Conector de la Radio)
Conector de 10 pines
Audio Externo (GND para ser activado)
(Entrada)
Alimentación de la Antena
(Máx 300mA (Salida)
RESET
FA-1609-A
FA-1614-A
FA-1613-A

OM / FMST Lecteur CD / Commande Changeur CD
Face détachable avec télécommande IR Schéma
d’Installation
RFX-8140
Epaisseur du tableau de bord Languettes àplier
ABCDEFG
1.2mm to 2.5mm x x x
2.4mm to 3.5mm x x x
3.6mm to 4.5mm x x
4.6mm to 5.5mm x x x
5.6mm to 7.0mm x x
7.0mm to 12mm x x x
12.0mm to 15mm x x
Vue de gauche Vue de droiteVue du haut
G G C
CCB F A D E E D AF B C
(Orange/Blanc)
(Orange)
(Rouge)
(Jaune)
20°
20°
®®
Aud Ext-1 (G–)
Aud Ext-1 (G+)
3
45 67 89 10
1
2
DIN (D–)
DIN (D+)
DIN (G GND)
DIN (D GND)
DIN (G–)
DIN (G+)
10
9
8
7
6
5
4
3
2
1
Connecteur DIN BLT
Aud Ext-1 (D–)
Aud Ext-1 ( D +)
22 21 20 19 18 17 16 15 14 13 12
1110987654321
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
Processeur Signal IN (D–)
Processeur Signal OUT (D–)
Processeur Signal IN (G–)
Processeur Signal OUT (G–)
Masse chassis
N/C
Sortie Dimmer
Entrée Dimmer
Allumage +12V
N/C
Antenne Electrique (Bleu Foncé)
Processeur Signal (D+)
Processeur Signal
(D+)
Processeur Signal IN (G+)
Processeur Signal OUT (G+)
Batterie +12V
Signal +G
Blindage
Signal +D
Signal –DSignal –G
NCNC
DIN Changeur CD/
Ex Audio-2 DIN
(Vue sur le DIN du Changeur)
4321
8765
12 11 10 9
13
1
2
3
4
5
6
7
8
9
10
11
12
13
N/C
N/C
N/C
N/C
Batterie +12V
V
E
R
T
Entrée Aud. Ext. blanc (G)
Sortie Audio BLT (DIN 6 broches)
Entrée Aud. Ext. rouge (D)
Aud Ext-1 (G–)
Aud Ext-1 (G+)
3
45 67 89 10
1
2
N/C
Droite (+)
Gauche (–)
Droite (–)
N/C
Gauche (+)
10
9
8
7
6
5
4
3
2
1
Aud Ext-1 (D–)
Aud Ext-1 ( D +)
V
E
R
T
Ext. Aud-1 Entrée Blanc (G)
Ext. Aud-1 Entrée Rouge (D)
(Droite)
G
R
I
S
Boucle Processeur de Signal (G)
La Boucle du Processeur de
Signal
est en position
désactivée d'origine.
Pour activer la
Boucle du
Processeur de Signal
, enlever
le couvercle du fond et ajuster
le commutatuer.
Boucle Processeur de Signal
DESACTIVE
ACTIVE
E
X
T
E
X
T
Radio
Enlever le couvercle du fond
Connecteur 22-broches Connecteur 10-broches
Processeur
de signal
externe
OUTIN
Orange/Blanche
Orange
Vert/Blanche
Brun
Jaune
Rouge
Bleu clair
Bleu/Rouge
Bleu/Blanche
Bleu foncé
Noir
Télécommande IR
RFX-1110
Appuyer sur le bouton
rouge “Losange R”pour
activer la commande “C.”
Batterie de
remplacement
(2) CR2032
1-6
+
–
®
Audio Externe (commande négative) (Entrée))
Antenne Electrique (300mA Max) (Sortie)
Dimmer (Contrôle externe) (Sortie)
Commande “C”(300mA Max) (Sortie)
(Impulsion 500mA)
Commande “B”(300mA Max) (Sortie)
(Délai d'allumage 0,5s –coupure rapide)
Commande “A”(2,0A Max) (Sortie)
(Allumage rapide –Délai de coupure 0,5s)
Batterie +12V (Entrée)
+15 Allumage (Entrée)
Masse Chassis (Entrée)
Fusible 10A
Atténuateur audio (mute) –commande
négative (Entrée)
Dimmer (+12V pour activer) (Entrée)
Commande “B”= Amplificateur(s)
Commande “A”= Processeur(s) de signal
Boucle Processeur de Signal (D)
Boucle Processeur de Signal (D)
Boucle Processeur de Signal (G)
(Vue sur le connecteur de la radio)
N/C
Commande “B”
Commande “A”
Commande “C“
Atténuateur audio
Audio-2
(Bleu/Blanc)
(Bleu clair)
(Bleu/Rouge)
(Brun)
(Vert/Blanc)
Cablage HP/Alimentation
(Noir)
Cablage RCA
(Vue sur le connecteur
de la radio)
Sortie Audio blanc (G)
Sortie Audio rouge (D)
(Vue sur le connecteur
de la radio)
Antenne
Fiche
Antenne
Angle de montage
maximum et minimum
Signal positif droite (+)
Commun négatif signal (–)
Signal positif gauche (+)
Blindage
Masse
Données E&C
N/C
N/C
RESET
FA-1609-A
FA-1614-A
FA-1613-A

AM / FM ST / CD-Spieler/CD-Wechsler-Steuerungsgerät
Abnehmbares Bedienteil/IR Fernbedienung Installations
Beiblatt
RFX-8140
Dicke des Instumenten-Panels Klammern zu biegen
ABCDEFG
1.2mm to 2.5mm x x x
2.4mm to 3.5mm x x x
3.6mm to 4.5mm x x
4.6mm to 5.5mm x x x
5.6mm to 7.0mm x x
7.0mm to 12mm x x x
12.0mm to 15mm x x
Linke
Seitenansicht Rechte
Weitenansicht
Draufsicht
G G C
CCB F A D E E D AF B C
Antenne
20°
20°
®®
Ext Aud-1 (L–)
Ext Aud-1 (L+)
3
45 67 89 10
1
2
DIN (R–)
DIN (R+) DIN (L GND) DIN (R GND) DIN (L–) DIN (L+)
10
9
8
7
6
5
4
3
2
1
Balanced DIN Harness
Ext Aud-1 (R–)
Ext Aud-1 (R+)
22 21 20 19 18 17 16 15 14 13 12
1110987654321
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
N/C
Einschaltstrom “B”
Einschaltstrom “A”
Einschaltstrom “C“
Stummschaltung
Audio-2
Sig. Processor Loop IN (R–)
Sig. Processor Loop OUT (R–)
Sig. Processor Loop IN (L–)
Sig. Processor Loop OUT (L–)
(Blau/Weiβ)
(Hellblau)
(Blau/Rot)
(Braun)
(Grün/Weiβ)
(Schwarz)
N/C
Dimmer Ausgang
Dimmer In
Ignition +12V
N/C
Motor Antenne
Sig. Processor Loop IN (R+)
Sig. Processor Loop OUT (R+)
Sig. Processor Loop IN (L+)
Sig. Processor Loop OUT (L+)
Batterie +12V
+ L Signal
Masse-
Schirm
+ R Signal
–R Signal –L Signal
NCNC
4321
8765
12 11 10 9
13
1
2
3
4
5
6
7
8
9
10
11
12
13
G
R
Ü
N
Bal. Aud. Augang (6-pin DIN)
Ext. Aud-1 (L–)
Ext. Aud-1 (L+)
3
45 67 89 10
1
2
N/C
Rechte (+) Linke (–) Rechte (–)N/C
Linke (+)
10
9
8
7
6
5
4
3
2
1
Ext Aud-1 (R–)
Ext Aud-1 (R+)
G
R
Ü
N
Ext. Aud-1 Eingang weiβ(links)
Audio Ausgang weiβ(links)
Ext. Aud-1 Eingang rot (rechts)
G
R
A
U
Audio Ausgang rot (rechts)
Prozessor Signal-Schleife (L) (Ausgang)
Die externe Prozessor Siganl-
Schleife (ist Voreingestellt auf
Bypass Position)
Um die externe Signalschleife
einzuschalten, müssen Sie das
Bedienteil abnehmen und
den Wählschalter umstellen
Prozessor Signal-Schleife
Bypass
eingeschaltet
E
X
T
E
X
T
Taste zum Lösen des
Bedienteils
22-pin Stecker 10-pin Stecker
Externer
Signal-
prozessor
Ausgang
Eingang
(Blick in den Radio
Anschluβ)
RCA Adapter
Strom Stecker
(Blick in den Radio Anschluβ)
(Orange/ Weiβ)
(Orange)
(Rot)
(Dunkelblau)
IR Fernbedienung
RFX-1110
Drücke “Diamond R”
Taste, um auf “C”
Einschaltimpuls zu geben
Ersatzbatterien
(2) CR2032
1-6
+
–
®
(Gelb)
Karosserie Masse
(Blick in den Radio
Anschluβ)
Orange/Weiβ
Orange
Grün/Weiβ
Braun
Gelb
Rot
Hellblau
Stummschaltung (GND zum aktivieren)
(Eingang)
Einschaltstrom “C”(300mA Max)(Ausgang)
(Pulsed 500ms)
Einschaltstrom “B”(300mA Max)(Ausgang)
(.5 sec Einschaltverzögerung-Schnelles Ausschalten)
Batterie +12V (Eingang)
Zündung (schaltbar +12V) (Eingang)
Karosserie Masse (Eingang)
Blau/Rot
Blau/Weiβ
Motor Antenne (300mA Max) (Ausgang)
Dunkelblau
10A Sicherung
Schwarz
Einschaltstrom “B”= Verstärker(s)
Einschaltstrom “A”= Signal Prozessor(s)
Dimmer Ausgang (Externe Kontrolle) (Ausgang)
Dimmer In (+12V zum aktivieren) (Eingang)
Audio (GND zum activieren) (Eingang)
Einschaltstrom “A”(2.0 Amp Max) (Ausgang)
(Schnelles Einschalten –.5 sec Ausschaltverzögerung)
Prozessor Signal-Schleife (R) (Ausgang)
Prozessor Signal-Schleife (R) (Eingang)
Prozessor Signal-Schleife (L) (Eingang)
CD Wechsler/Ex Audio DIN
(Blick in den CD Anschluβ)
Rechtes Signal (+)
Audio gesamt (–)
Linkes Signal (+)
Abschirmung
Masse
N/C
N/C
N/C
N/C
Batterie +12V
E&C Daten
N/C
N/C
Minimaler & Maximaler
Einbauwinkel
Antenneneigang
Ext. Aud-1 Eingang weiβ(links)
Ext. Aud-1 Eingang rot (rechts)
RESET
FA-1609-A
FA-1614-A
FA-1613-A

AM / FM ST / CD Player / CD Changer Controller
Frontalino Estraibile con Telecomando Istruzioni di
Installazione
RFX-8140
Spessore del pannello Alette da piegare
ABCDEFG
1.2mm to 2.5mm x x x
2.4mm to 3.5mm x x x
3.6mm to 4.5mm x x
4.6mm to 5.5mm x x x
5.6mm to 7.0mm x x
7.0mm to 12mm x x x
12.0mm to 15mm x x
Vista da sinistra Vista da destraVista dall’alto
G G C
CCB F A D E E D AF B C
Antenna
20°
20°
®®
Aud est.-1 (L–)
Aud est. 1 (L+)
3
45 67 89 10
1
2
DIN (R–)
DIN (R+) DIN (L GND) DIN (R GND) DIN (L–) DIN (L+)
10
9
8
7
6
5
4
3
2
1
Cavo DIN bilanciato
Aud est.-1 (R–)
Aud est.-1 (R+)
22 21 20 19 18 17 16 15 14 13 12
1110987654321
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
IN loop del processore (R–)
OUT loop del processore (R–)
IN loop del processore (L–)
OUT loop del processore (L–)
N/C
Dimmer Out
Dimmer In
Ignition +12V
N/C
Pwr. Antenna
IN loop del processore (R+)
OUT loop del processore
(R+)
IN loop del processore (L+)
OUT loop del processore (L+)
+12V batteria
(Giallo)
+ L Segnale
Massa
Schermo
+ R Segnale
–R Segnale –L Segnale
NCNC
4321
8765
12 11 10 9
13
1
2
3
4
5
6
7
8
9
10
11
12
13
N/C
N/C
N/C
N/C
+12V Batteria
E&C Data
N/C
N/C
V
E
R
D
E
Audio est.-1 Ingresso Bianco (sinistro)
Bal. Aud. Uscita (6-pin DIN)
Audio est.-1 Ingresso Rosso (destro)
Aud est.-1 (L–)
Audio est.-1 (L+)
3
45 67 89 10
1
2
N/C
Destro (+) Sinistro (–) Destro (–)N/C
Sinsitro (+)
10
9
8
7
6
5
4
3
2
1
Aud est.-1 (R–)
Aud est.-1 (R+)
V
E
R
D
E
Audio est.-1 Ingresso Bianco (Sinistro)
Audio Uscita Bianco (Sinistro)
Audio est.-1 Ingresso Rosso (Destro)
G
R
I
G
I
O
Audio Uscita Rosso (Destro)
Loop del processore di segnale (L) (Ingresso)
Consenso “C”(300mA Max) (Uscita)
(Impulsi 500mSec)
Consenso “B”(300mA Max) (Uscita)
(Accensione ritardo 0,5 sec, spegnimento immediato)
Consenso “A”(2.0 Amp Max) (Uscita)
(Accensione immediata, ritardo 0,5 sec spegnimento)
Antenna Elettrica (300mA Max) (Uscita)
Il loop del processore di
segnale éin posizione
BYPASS dalla fabbrica.
Per abilitare il loop del
processore di segnale esterno,
togliere il coperchio inferiore
e regolare lo switch.
Loop del processore
di segnale
BYPASS
ATTIVO
E
X
T
Radio Rimuovere il
coperchio inferiore
Connessione 22 cavi Connessione 10 cavi
Processore
di segnale
esterno
USCITA
INGRESSO
E
X
T
Loop del processore di segnale (R) (Ingresso)
Loop del processore di segnale (L) (Uscita)
Loop del processore di segnale (R) (Uscita)
Uscita dimmer (Controllo esterno) (Uscita)
Audio-2 est. (massa per attivare) (Ingresso)
Ingresso dimmer (+12V per attivare) (Ingresso)
Audio Mute (massa per attivare) (Ingresso)
Arancione/Bianco
Arancione
Verde/Bianco
Consenso “B”= Amplificatore
Consenso “A”= Processore di Signale
+12V batteria
(Ingresso)
Ignition (switched +12V) (ingresso)
Massa del telaio (ingresso)
Fusibile 10A
Marrone
Giallo
Rosso
Azzurro
Blu/Rosso
Blu/Bianco
Blu scuro
Nero
Premere il tasto
“DIAMOND R”per
il consenso “C”
Sostituzione batteria
(2) CR2032
Telecomando
infrarossi
RFX-1110
Connettore RCA
1-6
+
–
®
(Blu/Bianco)
(Azzurro)
(Blu/Rosso)
(Marrone)
(Verde/Bianco)
(Guardando il connettore
della radio)
(Guardando il connettore
della radio)
(Nero)
N/C
Consenso “B”
Consenso “A”
Consenso “C“
Audio Mute
Esterno Audio
Massa del telaio
(Arancione/Bianco)
(Arancione)
(Rosso)
(Blu Scuro)
(Guardando il connettore della radio)
Connettore di alimentazione
Angolo minimo e
massimo di installazione
Ingresso
Antenna
CD Changer/
DIN Audio-2 Est
(Vista del DIN del changer)
Signale destro (+)
Comune audio (–)
Signal sinistro (+)
Schermo
Massa
RESET
FA-1609-A
FA-1614-A
FA-1613-A

Sintonizzatore a copertura mondiale
Le bande di frequenza del sintonizzatore possono
essere programmate per adeguarsi ai diversi sistemi
dei paesi (Giappone escluso).
1.Tenere premuto DSPL per 2 secondi
2.Premere il tasto Onda Sinusoidale (Tuner)
3.PremerepiúvolteSELperselezionaretraAMERI-
CAS, EUR/AUST e SAUDI
Nota: per l'Italia selezionare EUR/AUST
Weltweiter Tuner
Das Frequenzband des Tuners kann programmiert
werden,umindenverschiedenenLänderneinwandfrei
zu funktionieren (ausgenommen Japan).
1.Drücken und halten Sie DSPL für zwei Sekunden
2.Drücken Sie SINE WAVE (Tuner)
3.Drücken Sie SEL, um zwischen AMERICAS, EUR/
AUST und SAUDI umzuschalten
Rockford Fosgate
Rockford Corporation
546 South Rockford Drive
Tempe, Arizona 85281 U.S.A.
In U.S.A., [phone]
In Europe, Fax [phone]
In Japan, Fax [phone]
MAN-1607-A
3/97
DEUTSCH ITALIANO
Sintonizador Standard Mundial
La banda de frecuencias del sintonizador puede ser
programdaparasercompatibleconlosdiferentescódigos
de los países (excepto Japón)
1.Mantenga pulsado el botón DSPL durante dos
segundos
2.Pulse el botón con la onda senoidal (Radio)
3.Pulse SEL para cambiar secuencialmente entre
AMERICAS,EUROPA/AUSTRALIAyARABIASAUDI
ESPAÑOL
World Wide Tuner
Thefrequencybandon the tuner can be programmed
toconformwithdifferentcountrycodes(exceptJapan)
1.Press and hold DSPL for two seconds
2. Press SINE WAVE (Tuner)
3. Press SEL to cycle through AMERICAS, EUR/
AUST and SAUDI
ENGLISH
FRANÇAIS
World Wide Tuner
La bande de fréquence peut être programmépour
conveniraucodesdesdifférentpays(exceptéleJapon).
1.Enfoncez et tenez DSPL enfoncédurant deux
secondes
2. Enfoncez SINE WAVE (Tuner)
3. Enfoncez SEL pour parcourir AMERICAS, EUR/
AUST et SAUDI
MADE IN MEXICO
Designed and Engineered in the USA
by Delco Electronics and Rockford Fosgate
This product was assembled by Delco Electronics at Deltronicos de Matamoros,
Mexico.Duetotheglobal nature of their manufacturingfacilitiesandtheelectronics
parts industry in general, some parts may be manufactured in other countries.