Rockford Fosgate RFX6000-SX User manual

OPERATION
MANUAL
MODEL:
RFX6000-SX
((<Siriusxm>))
READY
RFX6000-SX RFX-MR5BB
+DIGITAL
AUDIO/VIDEO PLAYER
+ SiriusXM-Ready™
+AM
/
FM
STEREO RADIO
+USB/SO
MUSIC PLAY
+ BLUETOOTH STREAM
+Dual
Zone

CONTENTS
CONTENTS .......................................................... 1
CONTROL PANEL ILLUSTRATION ......................... 2
WIRE DIAGRAM ................................................... 3
INSTALLATION.................................................... 4
BASIC OPERATION .............................................. 5
SiriusXM®
OPERATION......................................... 6
RADIO OPERATION .............................................. 10
AUX/USB/SD OPERATION ..................................... 11
CDC OPERATION .................................................. 13
BLUETOOTH OPERATION ..................................... 14
SPECIFICATION .................................................... 15
TROUBLESHOOTING ............................................ 16
P1

CONTROL PANEL ILLUSTRATION
(~@@
,- ,, ,, '
r· I I I
(< Slr~!l.~~ >))
CH
' ,-, ,-, ,- ,-, (') (') -'
II I I •• , I '-' '-' '~,
- .- - ~fi;; ~;
RFX-MR58 MEDIA PLAYER 4X OWATTS
AlPS BAND SCAN
@ @
(OPTION)
POWER ON/OFF
(g\ .. FUNCTION SELECT BUTTON
(~!.VOLUME UP/DOWN
({). MODE BUTTON
(~).DISPLAY BUTTON
(~).AUTOMATIC OR MANUAL TUNING
(FREQ UP~+~ OR FREQ DOWN 1+11 )
MENU
(7_). AUTO STORE AND PRESET SCAN/MENU(AS/PS)
/SELECT TRACK/CHANNEL SWITCH
(~).BAND/CDC DISC UP/ -10 TRACKS
C9J. AUTOMATIC TUNING CONTROL(SCAN)
/CDC DISC DOWN/ +1 0 TRACKS
dQ!. PRESET 1, PLAY/PAUSE
@.PRESET 2, REPEAT PLAY
@. PRESET3,RANDOM PLAY
@.PRESET 4/LEFT
@.PRESET 5/DOWN(ENTER)
@.PRESET 6/RIGHT
@.MENU/DIMMER SETTING BUTTON/UP
G). LCD DISPLAY
@.MUTE
P2
•
~-\-(g)
,.......,...___,.___'Y'.r----~f--Tr--Jt\-t- (6)

WIRE
DIAGRAM
c
e
u..
I
POWER
ANTENNA
MEMORY
YELLOW
BACK
UP
FRONT
+WHITE
LEFT
SPEAKER
-WHITE/BLACK
REAR
+GREEN
LEFT
SPEAKER
-GREEN/BLACK
Fuse replacement
*
IMPORTANT
NOTE:
When
using
cables
RFX10,
RFX16
and
RFX
30
for
runs
longer
than
50
feet,
use
RRAMP1
to
increase
signal
quality.
Maximum
distance
is
150
feet.
Install
RRAMP1
inline
before
cable
extensions.
(Unit
side)
BLACK
GROUND(-)
RED
IGNITION SWITCH (B+)
GREY+
FRONT
RIGHT
SPEAKER
VIOLET+
REAR
RIGHT
VIOLET/BLACK-
SPEAKER
If
there
is an
issue
with
the
fuse,
be
sure
to
check
all
power
connections
and
replace
the
fuse
with
same
type
and
rating.
If
a
fuse
blows
after
replacement,
you
may
have
an
internal
malfunction
with
the
unit.
Please
consult
with
your
nearest
repair
center.
Warning:
When
replacing
the
fuse,
be
sure
to
use
the
same
type
and rating
of
the
existing
fuse.
The
use
of
a
varying
type
or
rating
may
cause
serious
damage
to
the
unit.
Be
sure
your
wire
remote(RFX-MR8/RFX-MR6.5)
is
installed
correctly,
wrong
connection
will
cause
serious
damage
to
the
wire
remote.
P3

INSTALLATION
1.
Precautions
Carefully
choose a mounting location so
that
the
unit
will not
interfere
with normal
driving
functions
of
the vehicle.
Avoid installing the
unit
where it will be
subjected
to
excessive
vibration,
dirt
and high
temperatures,
including
direct
sunlight,
engine
compartment
heat
and
engine
exhaust.
Use
only
the supplied mounting
hardware
for
a safe and
secure
installation.
2. Mounting
illustration
Correct
mounting
positions
Better:
45
facing
upward
Incorrect
mounting
positions
Do
not
mount
the
black
box
in
either
position
shown.
Doing
Best:
90
facing
upward
so will
allow
water
to
travel
inside
the
unit
causing
damage.
3. Installation Note
Use the
enclosed
nylon wire
tie-downs
(wire
clamps)
for
additional
support. Using the
wire
tie-downs
to hold down the
wire
harness
will aid in
preventing
water
from
migrating
along the wires and into the unit.
P4

BASIC OPERATION
Power· ON/OFF (1)
Press this button to turn
unit ON or OFF.
SEL- Function Select Button (2)
Press the "SEL" button
repeatedly to scroll through the functions BAS> TRE >FAD> SUB>
DSP >REAR ZONE (SOURCE)> REAR ZONE (VOL). Once desired function is selected,
use the VOL buttons to change the setting value.
Press and hold the SEL button to
enter zone selections. Short press the SEL button repeatedly
to scroll through the
Zone: America/China/Europe
Beep: Activates Beep On/Off
Clock: 12/24 hour format
TRI1: Activates Trigger 1 On/Off (Switched 12V). This trigger is set to "ON" by default.
TRI 2:
Activates Trigger 2 On/Off (Switched 12V). This trigger will need to be reactivated if unit is
disconnected from power source.
VOL- Volume Up/Down (3)
Press the UP
arrow button to turn the volume up to the desired listening level.
Press the DOWN
arrow button to turn the volume down to the desired listening level.
MODE
button (4)
Short press the "MODE" button to switch through modes: FM/AM >AUX1 >AUX2
>SIRIUS> BT >
USB> SD >CDC
Long press the "MODE" button to switch through REAR ZONE options: R ZONE
Source> R ZONE Volume.
DISP- Display Button (5)
Press the "DISP" button to toggle the system time
On/Off on the LCD.
Adjusting Time (Clock)
Press and hold the "DISP" button until the hour digit starts to blink, use the ~I 11.- to adjust hour.
Once
hour is set, press "DISP" again to adjust minute using the ~I 11.- buttons.
Adjusting backlight- MENU (16)
Press the "MENU" button
for more the 2 seconds to adjust the backlight brightness on the LCD.
(25o/o, 1 00°/o)
Low Voltage Warning
When the vehicle's power supply drops below 10 volts, the LCD will display "BATTERY LOW" and
the system will beep
for 1 minute. The black box will turn off automatically after the 1 minute period.
Locking the Control Panel
To lock the RFX-MRSBB control panel, press and hold "SEL" and "DISP" buttons simultaneously for
3 seconds. The black box will not respond when button are pressed on the control panel. Press and
hold "SEL" and "DISP" buttons
for 3 seconds to unlock the control panel.
Rear Zone Operation
The purpose of this feature is to take advantage of playing dual media sources simultaneously.
Each zone has the ability to have its own media source along with independent volume control.
These functions can be accessed through the RFX-MRSBB control pa·nel or through wired
remote connections.
Audio Source
Long press the "MODE" button, select REAR ZONE Source. Use the Volume buttons to scroll
through available sources. Press "SEL" to select source for audio playback.
Audio Source Volume
Long press the "MODE" button, select REAR ZONE Volume, use the "VOL Up" and "VOL Down"
buttons to increase and decrease the volume to a desired level.
Note:
Please note if the. USB/SO mode is playing in the front zone, the SO/USB mode cannot be
selected in the rear zone.
PS

SiriusXM® OPERATION
Only SiriusXM® brings you more
of
what you love
to
listen to, all in one place. Get over
150
channels,
including commercial-free music plus the best sports, news, talk,comedy and entertainment.
Welcome
to
the world
of
satellite radio. A SiriusXM Vehicle Tuner and Subscription are required. For
more information,
visit
www.siriusxm.com."
Activating your SiriusXM subscription:
After installing
your
SiriusXM Connect Vehicle Tuner and antenna, power on
your
RFX6000 and
select SiriusXM mode. You should be able
to
hear the SiriusXM preview channel on Channel
1.
If
you
cannot hear the preview channels, please check the installation instructions to make sure
your
SiriusXM Connect tuner is properly installed.
After you can hear the Preview channel, tune to Channel 0
to
find the Radio
ID
of
your
tuner. You will
need this number
to
activate
your
subscription. Write the number down
for
reference.
Note: the SiriusXM Radio
ID
does not include the letters
I,
0,
S
or
F.
In
the USA, you can activate online
or
by calling SiriusXM Listener care:
e
Visit www.siriusxm.com/activatenow
e
Call SiriusXM Listener Care at 1-866-635-2349
For Canadian Subscriptions, please contact:
e
Visit www.siriusxm.ca/activatexm
e Call
XM
customer Care at 1-877-438-9677
Note, the activation process usually takes
10
to
15
minutes, but may take up
to
an
hour. Your radio
will need
to
be
powered on and receiving the SiriusXM signal
to
receive the activation message.
MODE (4)
• Mode
Selection
Short
press
MODE
button
to
select
SiriusXM
mode.
Note:
If
there
is no
SiriusXM
TUNER
connected
this
mode
will be
skipped.
Please
connect
your
SiriusXM
Tuner
to
the
SiriusXM
port
located
at
the
back
of
the unit.
Then
press
MODE
button
to
change
to
SiriusXM
mode.
DISP(S)
e
Display
Mode
Selection
Short
press
DISP
button
repeatedly
to
switch
different
display
mode. You can
choose
between-
Channel
Number-
CH/
Channel
Name-
CHANNEL/
Category
Name-
CATEGORY/
Artist
Name
-ARTIST/
Song
Title-
SONG/
Content
Info-
INFO/
&(repeat)-
SEEK+
/SEEK-
(6)
• Channel Browsing
When the
Category
Browsing
mode
is off,
short
press
the
buttons
to
start
browsing
all
channels.
Press
the
SEEK+/SEEK-
key to
browsing
next/previous
channels,
Press the
SEL
key to
select
the
channel
showed
on LCD and
play
it.
If
there
is no key
pressed in 5s,
the
LCD will
change
back
to
display
current
playing
channel
information
again. P6

SiriusXM OPERATION
• Category Browsing
In
the
Category
Browsing
mode,
short
press
the
buttons
to
start
browsing
channels
in
current
category.
Press
the
SEEK+/SEEK-
key
to
browsing
next/previous
channels,
Press
the
SEL
key
to
select
the
channel
showed
on LCD and
play
it.
If
there
is no key
pressed
in 5s,
the
LCD
will
change
back
to
display
current
playing
channel
information
again.
• Rapid Channel Browsing
When
the
Category
Browsing
mode
is off,
press
and hold
the
buttons
goes
into
rapid
channel
browsing
mode,
you can
browsing
all
channels
in
higher
speed,
if
you
release
the
touch
key,
the
LCD
will
show
the
information
of
the
last
browsed
channel.
Press
the
SEL
key
to
select
the
channel
showed
on LCD and
play
it.
If
there
is no
key
pressed
in 5s,
the
LCD
will
change
back
to
display
current
playing
channel
information
again.
• Category Selection
In
the
Category
Browsing
mode,
long
press
and hold
the
buttons
over
2S to
select
previous/next
category
without
press
SEL
key.
AS.PS {7)
• Direct Channel Tuning
Short
press
this
button,
the
first
character
of
the
channel
number
will
flash.
Press
the
Volume
up and
down
buttons
to
select
number
0-9
and
press
SEL
key
to
enter
then
the
second
character
flash.
Use
the
same
operation
to
select
third
character.
After
select
the
last
number,
press
SEL
key
to
enter
and
play
the
selected
channel.
BAND {8)
• Banks Selection
In
SiriusXM
mode,
short
press
this
button
to
change
the
bands.
The
current
bands
will
change
in
the
following
order:
SXM1-
SXM2-
SXM3
PRESET 1-6 {10/11/12/13/14/15)
• Store Preset Channel
Long
press
a
PRESETS
button,
the
current
channel
will be
stored,
and
the
corresponding
preset
number
will
appear
in
the
display.
The
PRESETS
buttons
can
be used
to
store
6
channels
in
each
bands(SXM1,
SXM2,
and
SXM3)
for
convenient
access
to
your
favorite
channels.
• Recall Preset Channel
To
recall
a
preset
channel,
select
a band
of
channels
(if
needed).Short
press
a
Presets
button
and
the
unit
will
turn to
the
corresponding
.stored
channel.
P?

SiriusXM OPERATION
SCAN(9)/MENU
(16)
• Channel
Scanning
Short
press SCAN button to scan all the channels. The unit will keep on scanning
every 5 seconds
per
channel until you press the SCAN button again to stop scan
function.
• Channel
Category
Mode
Short
press MENU button to
enter
category
mode while "CAT ON" will
show
in the
screen field, when
short
press again, the
category
setting will be off, and "CAT OFF"
will show.
PARENTAL
CONTROL
You can
lock
any SiriusXM
channels
you do not
want
others
to have access
without
your
permission. The
default
code is "5220". In case you
forget
your
code please
execute
the
default
reset operation
or
disconnect
the unit
completely
from the
battery
to resume the
default
code.
e GUIDE ON
HOW
TO
ENTER
THE
CODE
USING THE
VOLUME
BUTTON
When the
first
character
is flashing, Press the Volume up and down
butt~ns
to
select
5 and press SEL key to
enter
then the second
character
flash. The same operation to
select
the rest
character
"2","2","0".When
done, press
SEL
key
to confirm.
e
TOLOCKACHANNEL
.
Select
a channel
that
you wish to
lock
then long press SCAN button
-"CH
LOCKED"
will show on the display.
Enter
the code then press
SEL
key
to confirm
-"Channel
Locked" will
show
on the
display
e TO ACCESS A
LOCKED
CHANNEL
You can
access
a locked channel by
channel
browsing
method
or
direct
tunning
method, you are
requested to
enter
the
passcode
before
access
the
locked channel. The content metadata(Artist
Nme/Song Title/Content Info) would not allow to be displayed when you browse to a locked channel
without enter the passcode.
e TO
UNLOCKACHANNEL
Select the locked channel
that
you wish to
unlock
then long press SCAN
button-
"UNLOCK CH" will
show
on the display.
Enter
the
code then press
SEL
key
to confirm
-"Channel
Unlocked"
will
show
on the
display
e TO
CHANGE
THE CODE
Press and hold MENU Button
-"OLD
CODE" will
show
on the display.
Enter
the old
code then press SEL to confirm
-"NEW
CODE" will
show
on the display.
Enter
your
new code then press SEL again to confirm
-"SETCODE
OK" will
show
on the display.
e
LOCKEDCHANNELMANAGEMENT
When you
want
to browse all the locked channels, press and hold "MODE" button
and "1" button
simultaneously
to
enter
the locked channel browsing mode. You can
browse the entire locked channel by pressing the Volume up and down buttons
after
entering the
correct
passcode.
Select
a locked channel and press
SEL
key
if
you
want
to
clear
that
locked channel.
To
clear
all the locked channels except the enable
Mature channels ,
just
press the Volume up and down buttons until the
advisory
"CLEARALL LOCKED" display, then P8

SiriusXM OPERATION
press
the
Enter
button to execute.
If
you
want
to
change
the
enable/disable
status
of
the
mature
channels, you
just
press the Volume up and down
buttons
until
the
advisory
"LOCK/UNLOCK
MATURE"display, press the SEL key to switch.
MODE(4)
+
BAND(8)
• Default Reset
In
SiriusXM
mode, press and hold BAND and MODE button to reset the SiriusXM
mode to the
factory
default
setting. When
finished
the reset
operation,
the locked
channels
will be unlocked, the
mature
channels
will be
unrestrained,
the presets
storing
will be cleared, the
parental
control
passcode
will be resumed to
default
passcode,
etc.
TROUBLESHOOTING
PROBLEM CAUSE CORRECTIVE ACTION
SiriusXM
mode
can
not
be
Make
sure
to
choose
the
selected
USA
AREA
in
tuner
region
setting
Check Tuner
C
Display
Check
the
SiriusXM
tuner
message
in
SiriusXM
mode)
connection
on
the
back
ofthe
unit to
ensure
that it's
correctly
connected.
Check
Antenna
C
Display
Ensure
the
SiriusXM
antenna
message
in
SiriusXM
mode)
cable
is
connected
to the
SiriusXM
tuner correctly.
Check
the
SiriusXM
antenna
wire for
breaks
or
sharp
bends.
Replace
the
antenna
if
necessary.
If
the
message
remains,
the
antenna
may
have
been
damaged.
No
Signal
C
Display
message
The
vehicle
must
be
outside,
in
SiriusXM
mode)
and
the
antenna
must
have
a
clear
view
of the
southern
sky.
The
magnetic
antenna
must
be
mounted
on
the
outside
of
the
vehicle
for the
best
reception.
Channel
Not
Subscribed
Current
channel
not
included
in
C
Display
message
in
your
subscription
package.
Call
SiriusXM
mode)
SiriusXM
to
subscribe:
-In
the
USA
call
1-866-635-2349
-
In
Canada
call
1-877-438-9677
P9