Rockford Fosgate RFT3061 Guide

RFT3061
RFT3081
RFT3101
Installation
& Operation
Páginas de Referencia para la Instalación
Schéma d’Installation
Installations Beiblatt
Istruzioni di Installation
SUBWOOFER
ENCLOSURES

- 2 -
FEATURES
Enclosure:
Roto-Mold Construction — The use of Roto-Mold manufactur-
ing produces a composite enclosure with seamless construc-
tion. This greatly increases rigidity to prevent the enclosure
from flexing and allows custom designs to be fabricated. The
result is a radical, stronger, more reliable enclosure.
Acoustic Suspension Enclosure —The Subz enclosure uses a
vented design for optimum performance. The enclosure is
matched to the woofer for deep bass output while requiring
minimal operating space.
Anti-Tip Design —The enclosure has molded legs that provide
a solid foundation to prevent it from rolling.
Punch Woofer:
FIBERLock Cone —The cone material is a combination of nat-
ural and regenerated cellulose fibers interlaced with a 3rd,
longer fiber. The 3 natural fibers are chemically fused together
with a blend of 3 interactive binding agents.The cones are then
treated with a Thermally Cured Acrylic Emulsion that seals the
cone for exceptional dampening and even greater rigidity,
resulting in industrial strength power handling.
Aluminum Voice Coil Former —The voice coil is made of
multiple layers of copper wound on a black, anodized, alu-
minum former. This improves the speaker’s power handling by
efficiently dissipating heat from the voice coil.
Hyper-Extended Pole Piece —The pole piece has been
extended to provide a more linear magnetic field for the oper-
ation of the woofer. This lowers distortion and provides the
woofer with better low frequency response.
Vented Bumped Back Plate —The back plate has been
stepped deeper to allow the woofer more excursion for harder
hitting bass. Additionally, the back plate is vented with a
radiused aerodynamic vent that efficiently and quietly keeps
the voice coil cool.
System Model Number RFT3061 RFT3081 RFT3101
Frequency Response 50Hz-200Hz 45Hz-150Hz 40Hz-125Hz
Nominal Impedance 4Ω4Ω4Ω
SPL (dB @ 1W/1m) 85dB 86dB 87dB
Power Handling (RMS/Peak) 150W/300W 200W/400W 200W/400W
Overall Dimensions (in.)—
Height 7 11/16“9 1/8“10 13/16“
Width 10 5/8“12 11/16“15“
Length 15 9/16“17 7/16“24 1/16“
Weight (lbs.) 6.5 9.0 20.0
Specification
Reference
Sheet
RFT3061
RFT3081
RFT3101
6” Box That Rocks
8” Box That Rocks
10” Box That Rocks
SPECIFICATIONS
Specifications subject to change without notice

- 3 -
Installation
Reference
Sheet
RFT3061
RFT3081
RFT3101
6”Box That Rocks
8”Box That Rocks
10”Box That Rocks
Specifications subject to change without notice
RUN THE SPEAKER CABLE FROM THE AMP
When routing the speaker cable from the amplifier,
avoid running it close to any sources of high current
(e.g., wiring harnesses). The positive (+) speaker out-
put from the amp connects to the red terminal of the
enclosure, and the negative (–) connects to the black
terminal.
1. INSTALL THE MOUNTING BRACKETS
Place the enclosure in the desired mounting location and
position the mounting brackets approximately 4”from each
end. Push the mounting brackets as close as possible to the
enclosure without moving or lifting it. Carefully remove the
enclosure and secure the brackets using the supplied screws.
NOTE: Be careful not to mount the enclosure on cardboard or
plastic panels. Doing so may allow the screws to pull out
from the panel due to road vibration or sudden vehicle stops.
CAUTION: Before drilling, check under vehicle to avoid
damage to brake or fuel lines, etc.
2. INSTALL THE MOUNTING STRAPS
Feed each strap through the pair of mounting brackets and
position the enclosure in place over the straps. Tighten each
strap securely.
NOTE: Be sure the mounting straps are looped through the
buckle correctly. Check the straps regularly to ensure your
enclosure is securely mounted in place.
WARNING: PLEASE FOLLOW THESE INSTRUCTIONS CAREFULLY. FAILURE TO FOLLOW THESE INSTRUC-
TIONS OR TO INSTALL THE ENCLOSURE PROPERLY COULD RESULT IN DETACHMENT OF THE
ENCLOSURE AND SERIOUS INJURY.
Secure brackets to
floor board
INPUT
-+
Bridged Amplifier
(4Ω)
Black Red

Rockford Corporation
546 South Rockford Drive
Tempe, Arizona 85281 U.S.A.
In U.S.A., [phone]
In Europe, Fax [phone]
In Japan, Fax [phone]
www.rockfordfosgate.com
2/01 B.M.
LIT10963
MADE IN THE USA
This product is designed, developed and assembled in the USA by a dedicated group of
American workers. The majority of the components used in the construction of this
product are produced by American companies. However, due to the global nature of
their manufacturing facilities and the electronics parts industry in general, some parts
may be manufactured in other countries.
LIMITED WARRANTY INFORMATION
Rockford Corporation offers a limited warranty on Rockford Fosgate products on the following terms:
•Length of Warranty
1 year on speakers 90 days on speaker B-stock (receipt required)
•What is Covered
This warranty applies only to Rockford Fosgate products sold to consumers by Authorized Rockford Fosgate Dealers in the
United States of America or its possessions. Product purchased by consumers from an Authorized Rockford Fosgate Dealer
in another country are covered only by that country’s Distributor and not by Rockford Corporation.
•Who is Covered
This warranty covers only the original purchaser of Rockford product purchased from an Authorized Rockford Fosgate
Dealer in the United States. In order to receive service, the purchaser must provide Rockford with a copy of the receipt
stating the customer name, dealer name, product purchased and date of purchase.
•Products found to be defective during the warranty period will be repaired or replaced (with a product deemed to be
equivalent) at Rockford's discretion.
•What is Not Covered
1. Damage caused by accident, abuse, improper operations, water, theft
2. Any cost or expense related to the removal or reinstallation of product
3. Service performed by anyone other than Rockford or an Authorized Rockford Fosgate Service Center
4. Any product which has had the serial number defaced, altered, or removed
5. Subsequent damage to other components
6. Any product purchased outside the U.S.
7. Any product not purchased from an Authorized Rockford Fosgate Dealer
•Limit on Implied Warranties
Any implied warranties including warranties of fitness for use and merchantability are limited in duration to the period of
the express warranty set forth above. Some states do not allow limitations on the length of an implied warranty, so this lim-
itation may not apply. No person is authorized to assume for Rockford Fosgate any other liability in connection with the
sale of the product.
•How to Obtain Service
Please call 1-800-669-9899 for Rockford Customer Service. You must obtain an RA# (Return Authorization number) to
return any product to Rockford Fosgate. You are responsible for shipment of product to Rockford.
Ship to: Speakers
Rockford Acoustic Design
Speaker Returns
2356 Turner Ave NW
Walker, Michigan 49544
RA#:_________________
Ship to: Electronics
Rockford Corporation
Warranty Repair Department
2055 E. 5th Street
Tempe, AZ 85281
RA#:_________________