Rockler Wireless Speaker Kit User manual

Wireless Speaker
Kit Instructions
Assembly
The Wireless Speaker Kit, which includes one speaker unit with
connector wires and one control unit, can be mounted in solid
material or in a hollow or box-type structure.
If the two components are to be installed back to back, the
distance from the front of the material or box to the back
must be at least 2" but no more than 6" to allow wire connections
to be made.
1. Use a coping or scroll saw or a drill with a Forstner bit or
hole saw to cut a 17⁄8" diameter hole for mounting the speaker
and control units. Fig. 1. Solid material will require a
through hole; a hollow box will require matching holes
in front and back.
2. Press fit or, if desired, epoxy the speaker unit into the front
of the mounting structure. Make sure you will have access
to the color-coded wires/connectors.
3. Connect the wires from the speaker unit to the control unit,
pressing the connector on the red and black wires into the
red port on the back of the control unit and the white and
black wires into the black port. Fig. 2.
4. Push the wires inside the opening and press fit or epoxy the
control unit into the rear mounting hole.
Use as a Speaker
Check to be sure your device supports Bluetooth®2.1 with
A2DP technology.
1. Charge the speaker by plugging the small end of the included
USB cord into the control unit and the other end into a
power source.
Note: The LED indicator light will be red while the battery is
charging and turn blue when the battery is fully charged.
Battery life is up to 6 hours.
2. Press the power/Bluetooth®button on the back of the control
unit to turn on the speaker. The blue LED will blink slowly.
3. Make sure Bluetooth®connectivity is enabled on your device.
4. Press and hold the power/Bluetooth®button until the blue
LED begins to blink quickly (about 4 seconds). This means
the speaker is ready to pair to your device.
5. “My BT Speaker” should appear on your device. Select it and
enter the password “0000,” if necessary. Once a connection
has been established, the blue LED will stop flashing and
remain on. You can control speaker volume with the app you
are using to play audio.
Note: The speaker can be paired to only one device at
any given time.
Use as a Speaker Phone
When paired with a cellphone, the Wireless Speaker also can act
as a speaker phone.
1. Press the power/Bluetooth®button on the speaker to
answer a call.
Note: To reject a call, press and hold the button for 1 second.
2. When your conversation is over, press the power/Bluetooth®
button on the speaker to end the call.
Fig. 2
Fig. 1
Check Rockler.com for updates to these instrutions. If you have
further questions, please contact our Technical Support Department
at 1-800-260-9663 or [e-mail]
PLEASE SEE OTHER SIDE FOR IMPORTANT SAFETY WARNINGS

Distributed by Rockler Companies, Inc.
©2017 Rockler Woodworking and Hardware
57081
Rev 05/17
>Always confirm that you are using the most recent version
of the Instructions and safety warnings for your product. To
find the most recent version, find the product page on
Rockler.com and click on the link to the Instructions.
>For any tool used in conjunction with this product,
always read, understand and follow the instructions
 andsafetywarningsintheowner’smanualforthattool.
 Ifyoudonothavetheowner’smanual,obtainonefrom
 thetool’smanufacturerbeforeusingitwiththisproduct.
>Before using this product, review and verify that all
 toolstobeusedwithithavesafetyequipment
installed and are in proper working order as
 definedbythetools’owner’smanuals.
>Do not use this product until you have read and
are confident you understand:
 • Assembly(reverseside);
 • UseasaSpeaker(reverseside);
 • UseasaSpeakerPhone(reverseside).
>Remain alert and use good judgment when using
this tool. Do not use this tool if you are in any way
 impairedbymedications,alcohol,drugsorfatigue.
>Dress appropriately and remove all jewelry, secure
 looseclothingandtieuplonghairbeforeusing
this tool.
> Itisthesoleresponsibilityofthepurchaserofthis
product to ensure that any third party whom you
allow to use this product reads and complies with all the
instructions and safety precautions outlined in this
manual prior to use.
>Maintain these instructions and warnings as long as
 youowntheproduct.Keepthisbookletinaplacewhere
 itwillbereadilyavailableforreference.
>Theuserassumesallriskandresponsibilityforthe
proper use of this product and for ensuring product
 suitabilityforintendedapplication.
>Always wear safety glasses in compliance with ANSI
safety standards and hearing protection and follow all
standard shop safety practices, including:
• Keepyourworkareawelllitandclean;
• Unplugallpowertoolsbeforemakingany
  adjustmentsorchangingaccessories;
•Use dust collection tools and dust face masks to
  reduceexposuretodust;
• Useaccessorysafetyequipmentsuchas
  featherboards,pushsticksandpushblocks
  wheneverappropriate;
•Do not use power tools in explosive
  environments(e.g.,inthepresenceof
  flammableliquids,fumesordust);
• Keepchildrenandbystandersawayfrom
  thetooloperatingarea;
•Maintain proper footing at all times and
  donotoverreach;
•Do not force the tool.
>These warnings and instructions do not represent the
 totalofallinformationavailableregardingtoolsafety,
 useandtechnique.Pleasereadthefullmanualbefore
using this product and always seek out opportunities to
learn more and improve your skills and knowledge.
Thistoolisdesignedforspecificapplicationsasdefinedintheinstructionsandshouldnotbemodifiedand/orusedforanyother
applications. Before using the Wireless Speaker Kit, read, understand and follow all instructions and safety information provided.
KEEP THESE INSTRUCTIONS FOR FUTURE REFERENCE.
GENERAL SAFETY WARNINGS
Drilling, sawing, sanding or machining wood
productscanexposeyoutowooddust,asubstanceknown
ot the State of California to cause cancer. Avoid inhaling
wood dust or use a dust mask or other safeguards for
personal protection. For more information go to
www.P65Warnings.ca.gov/wood.
The Bluetooth®word, mark and logos are registered trademarks owned by
Bluetooth SIG, Inc. and any use of such marks by Rockler®is under license.
Other Trademarks and trade names are those of their respective owners.