Rockwell Automation Allen-Bradley 193-T1APM User manual

IEC/EN 60947-1,-4-1
UL 508
CSA 22.2 No. 14
Installation Instruction
Montageanleitung
Instruction de montage
Istruzione per il montaggio
Instrucción de montaje
(Cat 193-T1APM)
WARNING: To prevent electrical shock, disconnect from power source before installing or servicing. Install in suitable enclosure. Keep
free from contaminants.
WARNUNG: Vor Installations- oder Servicearbeiten Stromversorgung unterbrechen, um Unfälle zu vermeiden. Die Geräte müssen in
einem passenden Gehäuse eingebaut und gegen Verschmutzung geschützt werden.
AVERTISSEMENT: Avant le montage et la mise en service, couper l’alimentation secteur an d’éviter tout accident. Prévoir une mise
en coret ou armoire appropriée. Protéger le produit contre les environnements agressifs.
AVVERTENZA: Per prevenire infortuni, togliere tensione prima dell’installazione o manutenzione. Installare in custodia indonea.
Tenere lontano da contaminanti.
ADVERTENCIA: Desconectar la alimentación eléctrica antes de realizar el montaje y la puesta en servicio, con el objeto de evitar
accidentes. Instalado en una caja o armario apropiado. Proteger el producto de los ambientes agresivos.
Pozidriv No. 2
1,8...2,8 Nm
16...25 lb-in
Use 75°C Cu wire only
No. 16...6 AWG
1,5...10 mm2
16 mm2
2,5...10 mm2
1,5...10 mm2
No. 16...8 AWG
9mm 0,8
5,5
193-T1APM
193-T1APM
2
clic
140M-C-N45
1
193-T1A...
193-T1B...

Publication 193-IN075C-MU-P - May 2016 DIR 22_503_906 (Version 03)
Copyright © 2016 Rockwell Automation, Inc. All Rights Reserved. Printed in China.
Allen-Bradley, Rockwell Software, and Rockwell Automation are trademarks of Rockwell Automation, Inc.
Trademarks not belonging to Rockwell Automation are property of their respective companies.
Rockwell Automation maintains current product environmental information on its website at
http://www.rockwellautomation.com/rockwellautomation/about-us/sustainability-ethics/product-environmental-compliance.page.