ROLLER SUPPORT (2)
HOOK (4)
UPPER LEG (4)
LOWER LEG WITH FIXED FOOT (3)
LOWER LEG WITH ADJUSTABLE FOOT
LEG KNOB
* NOT ALL THE ACCESSORIES ILLUSTRATED OR DESCRIBED ARE INCLUDED IN STANDARD DELIVERY.
24
25
26
27
28
29
ACCESSORIES
Blade wrench 1
Work clamp 1
Miter lock handle 1
Dust bag 1
10˝x40 T carbide tipped saw blade 1
Roller supports 2
Hooks 4
Upper legs 4
Lower legs (3 with fixed foot, 1 with adjustable foot) 4
We recommend that you purchase your accessories
from the same store that sold you the tool. Use good
quality accessories with a well-known brand name.
Choose the type according to the work you intend to
undertake. Refer to the accessory packaging for further
details. Store personnel can assist you and offer advice.
READ ALL INSTRUCTIONS
BEFORE USING THIS APPLIANCE
INSTRUCTIONS PERTAINING TO A RISK OF INJURY
GENERAL
A.GROUNDING INSTRUCTIONS
All grounded, cord-connected tools:
In the event of a malfunction or breakdown,
grounding provides a path of least resistance for
electric current to reduce the risk of electric shock.
This tool is equipped with an electric cord having an
equipment-grounding conductor and a grounding
plug. The plug must be plugged into a matching
outlet that is properly installed and grounded in
accordance with all local codes and ordinances.
Do not modify the plug provided – if it will not fit the
outlet, have the proper outlet installed by a qualified
electrician.
Improper connection of the equipment-grounding
conductor can result in a risk of electric shock.
The conductor with insulation having an outer
surface that is green with or without yellow stripes
is the equipment-grounding conductor. If repair
or replacement of the electric cord or plug is
necessary, do not connect the equipment-grounding
conductor to a live terminal.
Check with a qualified electrician or service
personnel if the grounding instructions are not
completely understood, or if in doubt as to whether
the tool is properly grounded.
Use only 3-wire extension cords that have 3-prong
grounding plugs and 3-pole receptacles that accept
the tool’s plug.
Repair or replace damaged or worn cord immediately.
B.FOR ALL DOUBLE-INSULATED TOOLS
1. Replacement parts
When servicing use only identical replacement parts.
2. Polarized Plugs
To reduce the risk of electric shock, this equipment
has a polarized plug (one blade is wider than the
other). This plug will fit in a polarized outlet only
one way. If the plug does not fit fully in the outlet,
