
Operation :
1. Place the unit on a dry level surface .Attach the air filter to the front of the unit and
finger tight.
2. Connect the air supply hose to the unit using the quick connecting fitting.
3. Connect the point butt of the compressor to the outlet in car .
4. There is a switch of circulation on the lampshade , the first touch for illuminate, the
second touch for defending fog , the third touch for warning , the fourth touch for
closing.
5. Check to ensure the valve stem is clean and free of dirt. Connect the air hose by
screwing the brass inflator onto the valve stem . Only finger tighten the inflator. Do not
use any tool as you may damage the inflator or the valve stem.
6. Turn the compressor switch to “ on” and let air flow into the tire.
7. Watch the gauge closely and stop the motor when the manufacturer’s recom-
mended pressure has been achieved.
8. Remove the inflator from the valve stem. Remember to replace the valve cover on
the stem.
9. Disconnect the power cord. Remove air filter.
10. Allow the unit to cool and place neatly in the carry bag.
11. Store the unit in the dry location.
Warranty Information
Rockworth products have a limited warranty against defects in material and workman-
ship from the date of purchase. Rockworth products are designed for Domestic/Light
Industrial use and the warranty does not apply to defects resulting from accidental
damage, improper use, or exceeding the design limits of the product.
Please take time to read the instruction manual provided. For more information on the
range, please visit www.rockworthproducts.co.za
Rockworth is exclusively manufactured for and distributed by Agrinet (Pty) Ltd.
Private Bag x165, Centurion, 0046
T: +27(0) 12 657 2222