Roda RD15 B User manual

Manual
RD B

RD B Manual
Page
< This page is intentionally left blank >

RD B Manual
Page
roda computer GmbH
Landstrasse
Lichtenau/Baden
Germany
Phone: +()/-
Fax: +()/-
roda Service Center Hüllhorst
Hankamp
Hüllhorst
Germany
Phone: +()/-
Fax: +()/-

RD B Manual
Page
The information, instructions and descriptions in this manual are updated and refer to the pertaining dis-
play.
The manufacturer reserves the right to make changes to the contents of this manual without further no-
tice. Proprietor and manufacturer disclaim any warranty as to direct or indirect damage arising from errors,
omissions or deviations between the display and the information of the manual.
This manual is protected by copyright. All rights reserved. No part of this manual may be reproduced or
processed, duplicated or disseminated by means of electronic systems in any form (reproduction, photo-
copy, scan or other processes) without the written consent of the proprietor and/or manufacturer.
Any of the software described in this manual is sold or licensed“as is”. Should the programs prove defective
following purchase, the buyer (and not the manufacturer, its distributor, or its dealer) assumes the entire
cost of all necessary servicing, repair and any incidental or consequential damages resulting from any
software defects.
Brand and product names mentioned in this publication may or may not be copyrights and/or registered
trademarks of their respective companies. They are mentioned for identication purposes only and are not
intended as an endorsement of that product or its manufacturer.
Copyright © roda computer GmbH, Lichtenau --
Revision:
Version Description Date
1.0 Release 2014-05-16
1.1 Updated Combo Port 2014-12-12
1.2 Updated Service Centre address 2016-02-16
1.3 Updated DC-In Invisible Mode function 2019-05-21
1.4 Changed DP-DVI to RD-DVI 2019-09-26
Trademarks
All other brand and product names are trademarks or registered trademark of their respective companies.
Attention:
Please do not use the device outside the specications described in the manual (e.g., ambient tem-
perature). This might cause loss of data or even damage the display. Additionally warranty might void.
Convention
This manual is divided into individual chapters with interdependent contents. If you have experience with
the use of displays, you may skip individual chapters or directly look up the respective keywords.
Keys and key combinations are written in square brackets, e.g., [Ctrl] + [Alt] + [F] means that you must
press the Control, Alt and F keys simultaneously.

RD B Manual
Page
Note
Notes contain important information in connection with the directly related text or chapter.
Attention
You will nd the Attention notes where data loss or display damage may be the result of non-compliance
with this note.
Warning
Warnings inform you that personal damage or damage to the display or individual components thereof
may be the consequence of carelessness or non-compliance with the respective warning.
Regulatory Information / Disclaimers
Installation and use of this display must be in strict accordance with the instructions included in the user
manual provided with the product. Any changes or modications made to this device that are not express-
ly approved by the manufacturer may void the user’s authority to operate the equipment.
The manufacturer is not responsible for any radio or television interference caused by unauthorized modi-
cation of this device or the substitution of the connecting cables and equipment other than specied by
the manufacturer. It is the responsibility of the user to correct any interference caused by such unauthor-
ized modication, substitution or attachment. Manufacturer and its authorized resellers or distributors will
assume no liability for any damage or violation of government regulations arising from failing to comply
with these guidelines.
CE (with roda standard AC/DC converter)
EN (CISPR ) Radio Frequency Interference
EN (EN--, EN--, EN--, EN--, EN--,EN--,
EN--, EN--, EN--) Generic Immunity Standard)
LVD EN ( IEC ) Product Safety, IEC -:
Power Safety
There are specic power requirements for this display:
• Only use an approved power adapter for this device.
• When unplugging the power cord, please be sure to disconnect it from the plug head.
• Make sure the socket and any other extension cord you use can support the total current load of
all the connected devices.
• Before cleaning the computer make sure it is disconnected from any external power supply.

RD B Manual
Page
Please note: If possible use a appropriate stylus pen to operate the touch screen to avoid display pol-
lution or scratches.
The touch screen can be cleaned with a clean, soft cloth. Mild class cleaner may be sprayed on the
cloth.
Do not apply a class cleaner on the touch screen directly. Always apply it on the cloth.
Attention: Do not use strong or caustic cleaners. Those cleaners can damage the optical coating of the
touch screen.
At ambient temperatures of +°C or above limited and partial pillowing of the touch screen foil may
occur. This is not an unusual behaviour and almost always reverses when the temperature drops.
Environmental Information
The equipment that you bought has required the extraction and use of natural resources for its produc-
tion. It may contain hazardous substances for the health and the environment.
In order to avoid dissemination of those substances in our environment and to diminish the pressure on
the natural resources, we encourage you to use the appropriate take back systems. Those systems will re-
use or recycle most of the materials of your end life equipment in a sound way.
The cross-bin symbol invites you to use those systems.
If you need more information on the collection, reuse and recycling sys-
tems, please contact your local or regional waste administration.
Transporting the display
• Shut down the display.
• Disconnect the AC/DC adapter and all peripherals from the display.
• Close all interface covers.
• If available use a carrying bag or transport box when transporting the device.
Cleaning the display
• Switch o the display and pull the power plug of the AC/DC adapter from the electrical outlet.
• Clean the display with a water-damp cloth. You may use a mild glass cleaner for the screen: spray a
small amount of the class cleaner onto a soft, lint-free cloth and carefully wipe the screen with the
cloth.
• Do not use strong or caustic cleaners.
• An air gun is recommend for cleaning water and dust. For salty water please clean with fresh water
then blow dry with an air gun. Be sure not to turn the display up side down while water is being
applied.

RD B Manual
Page
Table of content
Introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
. Scope of delivery . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
. Overview . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
.. Front view . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
.. Rear side view . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
.. Connector panel . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
.. Right side view. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
.. Left side view . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
.. Upper side view. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
. Commissioning . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Components and Operations . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
. Location . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
. Ruggedness . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
. Power supply . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
. Switching ON . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
. Switching OFF . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
. Display Panel . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
.. Brightness . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
. Video signal inputs. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
. Touch screen. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
. Mouse/Trackball . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
. USB Interfaces . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
. Stereo speakers . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
. Invisible Mode (manual or wire contact) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
.. Manual Invisible Mode . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
.. Wire contact trigger Invisible Mode. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
.. Overview Invisible Mode trigger. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

RD B Manual
Page
.. Inverting Invisible Mode function. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
. NVIS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
. Using NV goggles . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
. Keyboard backlight brightness . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
. Programming of NVIS and Invisible Mode settings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
.. Additional controls. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
. Remote ON/OFF . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
. Power supply . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
.. MIL AC/DC adapter. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
... Please consider the following when using the AC/DC adapter . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
... Connection the AC/DC adapter. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
... AC/DC adapter power LED . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Specications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
. Display . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
. AC/DC adapter. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
. Interfaces. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
.. MIL DC-In . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
.. Combo Port. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
.. RD-DVI . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
.. VGA . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
.. USB . x. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
. Environmental ratings. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
.. IEC IP . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
.. MIL-STD-F . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
OSD Menu . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
. Setup. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
. Information (no input possible). . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
. Saturation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
. OSD Position. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

RD B Manual
Page
. Firmware (no input possible) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
. Gamma. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
. Size. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
. ADC (only VGA (RGB) analog mode). . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
. Save Mode. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
. Sharpness . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
. Contrast . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
. Brightness . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Maintenance and Service . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
. Cleaning. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
. Calibration. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
. Troubleshooting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
.. General troubleshooting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
... Display problems . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
... Sound problems . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
. Service . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
.. Service Supply Note. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
.. Service process . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
. Downloads . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Annex . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Annex A: List of abbreviations . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Annex B: Overview of the power supply connectors for dierent countries. . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Annex C: List of gures . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Annex D: List of tables. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

RD B Manual
Page
< This page is intentionally left blank >

CHAPTER
Page
Introduction

Introduction RD B Manual
Page
1 Introduction
1.1 Scope of delivery
The RD B display allows operation under extreme environmental conditions. All interfaces and slots
are covered. The casing provides a maximum of protection against shock, vibration, dust and humidity.
Technical details are listed in chapter„ Specications“.
The following lists the standard scope of delivery for the display.
Please use this list to check the package contents for completeness. Contact your dealer if one or more of
the following listed items are not contained in the package.
• RD B main unit
• Driver CD
• VGA(RGB) cable (optional)
• DVI cable (optional)
• External AC/DC adapter (optional)
• Stylus Pen (optional)
Figure 1: Scope of delivery
Please note: Scope of delivery depends on the specic order and can vary according to customized
specications.

RD B Manual
Page
Overview
1.2 Overview
1.2.1 Front view
Figure 2: Front view
Front USB . interface
Mouse pointer with left and right mouse button
F – F keys
MODE/SET key & brightness up down
Key Function LED
MODE/SET Enables/disables secondary func-
tion of up/down keys, Konguration
of brightness settings
lights orange if MODE enabled
Brightness down/
NVIS Reduces brightness, Activates NVIS
mode if MODE/SET enabled lights orange if minimal value reached
and key pushed
Brightness up/PiP Increases brightness lights orange if maximal value reached
and key pushed
Figure 3: Function MODE/SET keys and LEDs
ON/OFF button (ON/OFF delay approx. seconds) and power LED (ON = green)
n/a Stereo speakers (left/right)

Introduction RD B Manual
Page
1.2.2 Rear side view
Figure 4: Rear side view
1.2.3 Connector panel
Figure 5: Connector panel
No Name Function Connector
DC-In +19V DC power supply 62IN-12E-8-33P pin contact
Combo Port Touch screen, USB and speaker signal Sub-D9 jack
RD-DVI RD-DVI signal input DVI AD dual link jack
VGA(RGB) VGA(RGB) signal input Sub-D15 HD jack
2x USB 2.0 USB 2.0 signal output 2x USB A jack
Table 1: Interfaces rear side
Please note: Not shown is an optional Mx earthing screw.

RD B Manual
Page
Overview
1.2.4 Right side view
Figure 6: Right side view
Increase volume
Reduce volume
1.2.5 Left side view
Figure 7: Left side view
Please note: The left and right side mounting holes are Mx Helicoils.

Introduction RD B Manual
Page
1.2.6 Upper side view
Figure 8: Upper side view
OSD menu keys:
Conrm input (“Enter”)
Menu navigation left/reduce value
Menu navigation right/increase value
Leave menu/sub menu (“Esc”)
1.3 Commissioning
• Remove the RD B from the packaging and set it on a surface with the bottom side facing up.
• If appropriate attach the RD B to the tting mounting solution. Screws (M for mounting) are not
part of the standard RD B scope of delivery.
• Make sure to fasten the screw with appropriate force to not damage the threads.
• V AC operation: Plug the line cable into an electrical outlet. Plug the MIL plug of the AC/DC
adapter into the DC input of the display and tighten the knurled screw.
• V DC operation: Connect the DC/DC adapter to the DC power supply and connect the DC plug
with the DC-In of the RD B.
• The DC-In is coded. It is not possible to misapply the DC plug.
• Connect a VGA(RGB) or DVI cable to the display and the signal source.

RD B Manual
Page
Commissioning
• Turn the display ON by pressing the power button for approx. seconds. The power LED will light
up green.
• If the display shows a “no signal” message, check the cable connections and the settings of the
signal source.
Please note: You can nd informations concerning power supply connectors for dierent countries in
the annex.
The video signal during POST can vary and may depend on BIOS settings of the signal source.

Introduction RD B Manual
Page
< This page is intentionally left blank >

Page
Components
and Operation
CHAPTER

Components and Operations RD B Manual
Page
2 Components and Operations
2.1 Location
A clean and moisture free environment is preferred. Make room for air circulation. Avoid areas with:
• Sudden or extreme changes in temperature.
• Extreme heat.
• Strong electromagnetic elds.
• Dust or high humidity.
If it is necessary to work in a hostile environment, please regularly maintain your display by cleaning dust,
water, etc. to keep it in optimal condition.
2.2 Ruggedness
The display is designed with rugged features such as vibration, shock, dust and rain/water protection.
However, it is still necessary to provide appropriate protection while operating in harsh environments.
NEVER immerse the unit in water. Doing so may cause permanent damage.
All connectors will corrode if exposed to water or moisture. Corrosion is accelerated if the system’s power
is ON. Please take proper water-resistant measures for cable connections.
The DC jack and cables are sealed and may be operated with water splashing while attached. All port cov-
ers should be in place when no cable is attached.
2.3 Power supply
The display can be powered via AC/DC or DC/DC adapter ( V DC-In).
2.4 Switching ON
The RD B is equipped with a power ON delay to avoid switching ON/OFF the display by accident. In
order to switch ON the display, the power ON/OFF button must be pressed for approx. seconds without
interruptions. The green power LED will light green to signalise the operational state.
2.5 Switching OFF
To switch OFF the display, press the ON/OFF button for approx seconds. The display will switch OFF and
the power LED goes out.
2.6 Display Panel
The panel of the RD B is a : x XGA panel with typical cd/mbrightness, a contrast of :
and a LED backlight.
Table of contents
Other Roda Monitor manuals