Rohnson R-344 User manual

STEAM IRON
R-344
INSTRUCTION MANUAL

IMPORTANT
IMPORTANT SAFEGUARDS
Please read the instruction manual before and save it for future reference.
Before switching on check that voltage indicated on the rating label corresponds to the main
voltage in your home
For home use only, Do not use for industrial purposes. Use the steam iron only for its intended
use.
Do not use in outdoor or in damp area
Do not immerse the steam iron and cord in water or other liquids
Never pull the cord while disconnecting form the power outlet; instead, grasp the plug only and
pull to disconnect.
Do not allow the cord to touch sharp edges and hot surfaces
Always unplug the steam iron form the power supply when filling with water or emptying and
when not in use.
Do not operate the steam iron with damaged cord or plug, or after the appliance malfunctions, or
has been dropped or damaged in any manner. To avoid risk of electric shock, do not disassemble
the steam iron, take it to a service center for examination, repair or mechanical adjustment.
This appliance is not intended to use by persons (including children) with reduced physical,
sensory or mental capabilities or lack of experience and knowledge, unless they have been given
supervision or instruction concerning use of the appliance by a person responsible for their safety.
Children should be supervised to ensure that they do not play with the appliance.
Do not leave the iron unattended while hot or connected or on an ironing board
If ironing is interrupted, stand iron on heel rest only, do not place the steam iron on metal or rough
surfaces.
CAUTION: To avoid circuit overload, do not operate another high wattage appliance on the same
circuit.
BEFORE THE FIRST USE
Some parts of the steam iron have been slightly greased and as a result the iron may slightly
smoke when switched on for the first time. After a short time this will cease.
Remove protection cover from the soleplate and clean it with a soft cloth.

PARTS DESCRIPTION
1. Shot of Steam Button 7. Water Fill Hole
2. Spray Mist Button 8. Fabric Select Dial
3. Adjust Steam Control Knob 9. Housing
4. Spray Nozzle 10. See Through Water Tank
5. Steam On/Off Button 11. Heel Rest
6. Power Indicator Light 12. Soleplate
HOW TO USE
Always check whether a label with ironing instructions is attached to an article to be ironed.
Follow these instructions in all cases.
Turn the temperature control dial round to set the appropriate temperature indicated in ironing
instructions or in fabric label.

LABEL
TYPE OF TEXTILE
Do not iron this article
.
Synthetics, Nylon,Acrylics, Polyester, Rayon
..
Wool, Silk
…
Cotton, Linen
Insert the main plug into the wall socket. The indicator light will turn on.
When the indicator light goes out you may start ironing.
If you set the temperature control to lower setting after ironing at a high temperature. it is not
recommended to iron before the pilot light switches on again.
WATER TANK FILLING
Unplug the iron before filling the water tank.
Hold the steam iron in horizontal position.
Slowly pour water through the water inlet.
Do not fill higher than mark on the water tank, in order to avoid spilling out of water.
NOTE: Your steam iron is designed to use tap water, However, if the water is very hard, it is
advisable to use distilled water.
The water tank should be emptied after each use.
NOTE: if you empty the water tank after the steam iron has cooled down, set the steam iron
upright position on its heel rest, plug it in and set the temperature control dial to the maximum
position, heat for 2 minutes. Unplug the steam iron from the power supply.
SPRAYING
As long as there is enough water in the water tank, you may use the spray button at any
temperature setting during steam or dry ironing.
Press the spray button several times to activate the pump while you are ironing.
STEAM IRONING
Set the variable steam control to the desired position.
CAUTION: Avoid coming in contact with ejected steam.

DRY IRONING
The steam iron can be used on the dry setting with or without water in the water tank, it is best to
avoid having the water tank full while dry ironing.
Turn the variable steam control to the minimum position.
Select the setting on the temperature control dial best suited for the fabric to be ironed.
CAUTION: If the steam iron has been used for a long time, it is hot and there is no water. Do not
refill it with water until the steam iron cools down.
BURST OF STEAM
The burst of steam feature provides additional steam for removing stubborn wrinkles.
Turn the variable steam control to the maximum position
Press the powerful steam button to release the burst of steam.
NOTE: To Prevent water leakage from the soleplate, do not keep the powerful steam button
pressed for more than 5 seconds.
WHEN YOU FINISHED IRONING
Set the temperature dial to the minimum position.
Remove the main plug from the wall socket.
Stand the iron on heel rest.
CAREAND CLEANING
Before cleaning the steam iron ensure it is unplugged from the power supply and has completely
cooled down.
Do not use abrasive cleaners.
Σημείωση: Σας συνιστούμε να κρατήσετε τη συσκευή πάνω από το νεροχύτη σας ή πάνω από
μια λεκάνη για να περισυλλέξετε τις ακαθαρσίες.
SELF-CLEANING
It is important to apply “self-cleaning” at least every two months to remove
impurities etc.
Hold the iron horizontally and change the temperature control dial (Fabric Select Dial) to the
maximum position (MAX indication).
Turn and hold to the right the Adjust Steam Control Knob, and while holding on this position,
simultaneously press the Shot of Steam Button (Turbo).
Boiling water and steam will be ejected from the holes in soleplate with impurities washed out.
Note: Please move the iron over the sink or a bowl to collect the impurities and water that will be
ejected.

ANTI-CALC SYSTEM
A special resin filter inside the water reservoir softens the water and prevents scale build-up in
the plate. The resin filter is permanent and does not need replacing.
Please note:
Use tap water only. Distilled and/demineralized water makes the “Zero-Calc”, anti-calc system
ineffective by altering its physicochemical characteristics.
Do not use chemical additives, scented substances or decalcifies. Failure to comply with the
above-mentioned regulations leads to the loss of guarantee.
ANTI-DRIP SYSTEM
With the anti-drip system, you can perfectly iron even the most delicate fabrics.
Always iron these fabrics at low temperatures. The plate may cool down to the point where no
more steam comes out, but rather drops of boiling water that can leave marks or stains. In these
cases, the Anti-drip system automatically activates to prevent vaporization, so that you can iron
the most delicate fabrics without risk of spoiling or staining them.
STORAGE
Unplug the appliance from the power supply, empty the water tank (do it after each use) and allow
steam iron to cool down completely.
Wrap the cord around the heel rest.
To protect the soleplate, place the steam iron in an upright position on its heel rest.
IMPORTANT INFORMATION FOR CORRECT DISPOSAL OF THE PRODUCT IN
ACCORDANCE WITH EC DIRECTIVE 2002/96/EC.
At the end of its working life, the product must not be disposed of as urban waste.
It must be taken to a special local authority differentiated waste collection center or to a dealer
providing this service.
Disposing of a household appliance separately avoids possible negative consequences for the
environment and health, deriving form inappropriate disposal and enables the constituent
materials to be recovered to obtain significant savings in energy and resources. As a reminder
of the need to dispose of household appliances separately, the product is marked with a
crossed-out wheeled dustbin.