Roidmi XDJ07RM User manual

Smart Cordless Wet Dry Vacuum Cleaner
Operation Manual
Read manual before use. Keep it well for future reference.
Pictures are for reference only, actual product may vary.
Scan the QR code for manuals
in multiple languages

Safety precautions
Product introduction
Product installation
3
5
Installation and disassembly of appliance
7
7
7
Installation of accessories
Product use
Power on machine and mode switch
8
8
8
9
Display functions introduction
Charging base use
10
Use of self-cleaning function
10
11
11
How to reset and clear user data
12
13
Mi Home App Installation
Disassembly and use of clean water tank
Disassembly and use of waste water tank
Product cleaning
13
14
Disassembly and cleaning of the waste water tank and cleaning of the optical flow sensor
14
Cleaning the brush cover
Cleaning of soft roller brush
15
16
16
Basic parameters
15
Troubleshooting
Disposal
2
Warranty and limitations of liability

3
Adapter use
1. This adapter is only applicable to the appliance designated by ROIDMI;
2. Do not spray or immerse the body or plug in water;
3. Do not disassemble the power adapter by yourself to avoid fire or electric shock accidents;
4. If the shell is damaged, do not use the adapter to avoid the risk of electric shock;
5. The adapter is for indoor use only, please do not expose it to rain;
6. Before cleaning or maintaining the adapter, remove the plug from the socket;
7. Please be sure to unplug the plug from the power socket before cleaning and maintenance to avoid electric shock and injury;
8. If the cord is damaged, it must be replaced by the manufacturer, its service agent or qualified personnel to avoid danger;
9. Do not try to use this adapter to charge non-rechargeable batteries;
Charging
1. Before charging, please check the following items: ①Check whether the adapter specification information is consistent with the
required power supply voltage; ②Please use AC power with rated voltage, do not use generators or DC power, etc., to avoid fire and
electric shock; ③Do not use a charger other than this product to charge the machine, please use a designated charger to avoid
battery failure or extreme thermal effects;
2. Do not touch the plug or any live part of the product with wet hands to prevent the risk of electric shock;
3. Be sure to insert the plug firmly to the end to avoid electric shock, short circuit and fire;
4. During charging or use of the product, if the body is deformed, has abnormal please immediately cut off the power and unplug
the plug, and place the product in an open area without combustible materials to ensure safety and manufacture Replacement and
maintenance by the supplier or its dedicated maintenance personnel to avoid danger;
5. When unplugging the plug, be sure to hold the insulated part of the adapter body, and do not pull the power cord;
6. This appliance contains batteries that are only replaceable by skilled persons.
7. This appliance contains batteries that are non-replaceable.
Appliance use
1. Do not wet the appliance, to prevent a fire and electric shock accident due to a short circuit of the machine;
2. Do not use this appliance near or on the surface of flammable and explosive objects, which may cause the risk of fire and explosion;
3. This appliance is not suitable for use by children or people with poor physical, sensory, and mentality, and people who lack experience
and knowledge. Please supervise during use;
4. Do not use this appliance to pick up detergent, kerosene, gasoline, alcohol, paint, perfume, etc., these liquids may cause the
appliance to short-circuit, fire or explode;
5. Do not use this appliance to pick up toner ink used in laser printers and copiers. These objects may cause fire or explosion;
6. Do not use this appliance to pick up any burning or smoking objects, such as soot from an unextinguished heat source, burning
cigarette butts or matches, etc.;
7. Do not place the airflow channels and movable parts of the appliance close to long hair, Changsong clothes, fingers and other
parts of the body;
8. Do not disassemble, repair, or modify by yourself to avoid fire, injury, or poor operation, except for the replacement of
consumables according to this manual;
9. In the event of an abnormal failure, please immediately cut off the power supply and stop using it to avoid smoke, fire and electric
shock;
10. If electric leakage , excessive motor temperature or abnormal noise are found during use, such as overheating of the body,
abnormal sound, odor, weak suction, etc., stop using it immediately and contact our company's after-sales maintenance personnel;
Daily cleaning and maintenance
1. If appliance is not in use for a long time, you should immediately turn off the power and unplug the charging plug;
2. The battery is a sealed device, and there is no safety hazard under normal circumstances. Under extreme conditions, if liquid
leaks out of the battery it may cause irritation or burns. If you touch it carelessly, please follow the following precautions: ①If
contact with skin—wash with soap and water; ②If contact with eyes—wash with water immediately At least 15 minutes and
seek medical help;
3. Please check the smoothness of the suction nozzle regularly. If there is a blockage, please clear it in time to avoid the blockage
causing a decrease in suction and affecting the performance of the machine;
Safety Precautions
1. Latest operating instructions
2.
Explanation of symbols
The lightning symbol inside a triangle is used when there is a potential risk of personal injury, such as electric shock.
An exclamation mark in a triangle indicates important instructions in this operating manual that carefully have to be observed.
The arrow symbol indicates specific tips and advice on operation.
3.Safety instructions
Read the manual before use.
IMPORTANT SAFETY INSTRUCTIONS
BEFORE USING READ ALL INSTRUCTIONS
When using an electrical appliance, basic precautions should always be followed, including the following: READ ALL INSTRUCTIONS
BEFORE USING (THIS APPLIANCE).Failure to follow the warnings and instructions may result in electric shock, fire and/or serious injury.
WARNING – To reduce the risk of fire, electric shock, or injury:
Scan the QR code for manuals in multiple languages
Hereby, [ROIDMI INFORMATION TECHNOLOGY CO., LTD.] declares that the radio equipment type [Bluetooth Module] is in
compliance with Directive 2014/53/EU. The full text of the EU declaration of conformity is available at the following internet
address:http://doc.roidmi.com/web/#/27?page_id=0

4
4. After using the machine, please clean the waste water tank in time, keep the ventilation path unobstructed, to avoid blocking
the suction power and the motor heating, which will affect the service life of the appliance;
5. Please use a dry cloth to clean the dust on the plug regularly to avoid fire due to poor insulation and other reasons;
6. If you do not use the appliance for a long time, please make sure to charge it at least once a month to avoid serious damage to the
battery due to lack of power;
7. Before disposing of the appliance, please take out the battery from the machine;
8. Before removing the battery, be sure to turn off the power to the appliance and operate it. Please place the removed battery properly;
rotate the display cover clockwise,you can open the display, unplug the display cable, remove the display, then use a screwdriver to
remove the 4 screws of the battery cover, and remove the battery cover, unplug the battery connection line, then the battery pack
can be taken out;
9. Please turn off the power before cleaning the appliance;
10.Do not run the brush on the power cord.
Storage
1. Please keep the floor appliance away from the electromagnetic equipment of the hospital;
2. Keep the charger away from all heat sources;
3. After using the appliance, please store it in a dry and cool place;
If the appliance fails, please contact the after-sales personnel, do not repair by yourself to avoid
danger;If you need to transport or mail it , please pour out the liquid in the clean water tank and
waste water tank, and wipe both water tanks to prevent backflow and causing damage the appliance;
SAVE THESE INSTRUCTIONS
Household use only
Scope of use of the appliance
1. This appliance is suitable for hard floors in indoor environments, including waxed floors, stone floors, rubber floors, marble floors,
granite floors,terrazzo floors, solid wood floors, composite floors, bamboo floors various mirror tiles, porcelain tiles and other flat
surfaces. If it is not bumpy when using this product on a flat ground surface, the best results may not be achieved;
2. Do not use this product near working fireplaces or heaters to prevent deformation of the machine shell;
3. Do not pick up high-temperature substances (unextinguished cigarette butts, matches or hot ash, etc.), ultra-fine substances (such
as lime, cement, wood chips, gypsum powder, ashes, etc.)carbon powder, etc.) dangerous goods (such as solvents, descaling agents,
etc.), chemical substances (such as acidic substances, detergents, etc.) and other substances with uncertain physical properties;
4. Do not use this appliance to pick up sharp objects, such as glass pieces, small toys, pins, paper clips, stones, plaster, large pieces of
paper, etc as they may cause blockage and damage the machine;
5. Stains with strong grease, strong stickiness or strong dyeing properties such as shoe polish, paint, paint, etc., are not within the
scope of use of this product;
Appliance
1. Do not disassemble and assemble the closed parts of the appliance by yourself. There are no parts that can be repaired by the
customer, and do not try to change the performance of the machine, otherwise it will cause danger;
2. Using a voltage that does not correspond to the specifications of this product will damage the motor and is more likely to cause
harm to the user;
3. When cleaning the stairs, be extra cautious to prevent falling;
4. Do not shake or bump the machine up and down to prevent waste water from flowing into the motor;
5. Please do not tilt the machine to one side or lay it flat to prevent waste water from entering the motor;
6. Do not use if the clean water tank and waste water tank are not installed correctly;
7. Do not place any small objects on the air outlet,or block the air outlet. Remove the small objects that may hinder the smooth air flow
of the air outlet to prevent the machine from overheating;
Other
1.The appliance is not to be used by persons (including children) with reduced physical, sensory or mental capabilities, or lack of experience
and knowledge, unless they have been given supervision or instruction;
2.Children being supervised not to play with the appliance;
3.The plug must be removed from the socket-outlet before cleaning or maintaining the appliance;
4.This appliance can be used by children aged from 8 years and above and persons with reduced physical, sensory or mental capabilities
or lack of experience and knowledge if they have been given supervision or instruction concerning use of the appliance in a safe way
and understand the hazards involved;
5.Children shall not play with the appliance;
6.Cleaning and user maintenance shall not be made by children without supervision;
7.The network standby power consumption is 0.99W, the ordinary standby power consumption is 0.50W, after the machine is fully
charged, it will enter the network standby immediately after power on or standby;
8. The WiFi module takes effect when the machine is turned on or in standby. If you want to turn off the WiFi module, you need to place
the product on the charging base and the battery is fully charged. Press and hold the power button for 5 seconds, and the WiFi module
will be turned off after the machine is turned off;
9.The appliance is only to be used with the power supply unit XDJCDZ01RM / XDJCDZ01RM* charging base and original factory designated
charger;

Product Introduction
Smart Cordless Wet Dry Vacuum Cleaner
5
Water spray button
Display screen
Voice/WIFI button
(Long press WIFI, short press voice)
Waste water tank
Waste water tank release button
Soft roller brush
Roller brush cover
release button
Spout
Clean water tank
Clean water tank
release button
speaker
Reset hole
Handle removal hole
handle
Self-cleaning button
Soft brush pull ring
Power switch
Mode switch button

Charging Base
6
Accessories
Storage stand accessoriesFilter
Cleaning brushSoft roller brush
Power adapter
Charging contacts
charging port

7
Product installation
Installation and disassembly of appliance
Installation: Insert the end of the handle into the host interface
of the appliance in a vertical direction, until you hear a "click"
sound, then make sure that the handle is tight and not loose,
and the installation is successful.
Disassembly: Use a hard object to reach into the handle
disassembly hole on the back of the fuselage to press the
shrapnel, and at the same time pull out the handle of the
machine.
"Click"
1. Press down the two accessories of the storage base along the buckle
of the charging base until you hear a "click" sound after that, the
installation is successful.
2. Connect the charging port at the back of the charging
dock to the power adapter, and then turn on the power.
Installation of accessories
Installation of Charging base

WARNING
Product use
Power on machine and mode switch
Smart Mode
Suction Mode
Refreshing Mode
WARNING
140°
8
Display functions introduction
Refreshing mode
Smart mode
Dirty sensor halo
(According to the degree
of pollution of the inhaled
sewage perform red and
blue ring change display)
Self-cleaning status
WIFI status
Voice status
( Voice is on, light is on)
Waste water tank status
(The waste water tank
is full and the light is on)
Clean water tank status
(Lights up when the clean
water tank is not installed
or when there is no water)
Battery status
Power display
1. Do not let children or pets approach the appliance to avoid injury;
2. Please do not install violently to avoid unnecessary damage;
3. Please power off the machine before installing accessories and disassembling the clean water tank and waste water tank to avoid danger;
4. When there is water in the clean water tank or the waste water tank, be sure to be careful of slippery hands to prevent hurting
yourself during the disassembly process.
Click the power switch , press and hold for 1 second to turn on the machine, the machine starts to work, and the default smart mode is
turned on;
In the running state, click the switch button to switch between Smart Mode, Suction Mode, and Refreshing Mode.
1. Do not use the appliance to absorb foam liquid;
2. Do not tilt the appliance more than 140° to avoid water leakage;
3. In order to prevent waste water from flowing out, please do not lay the appliance flat or shake it violently, so as to avoid liquid
backflow damaging internal components;
Suction mode

Charging base use
Place the charging base on a level ground and place the appliance on the charging base vertically and then charge it after
powering on.During the charging process, the fan will be automatically turned on to dry the roller brush (the fan will continue to run for
about 3 hours and then stop). During the air-drying process, the roller brush will automatically rotate to a certain angle every 3 minutes
(the roller will stop rotating after about 3 hours). During the operation of the fan, You can press the power button or the mode switch
button to end the drying function.
9
Low battery
The screen corresponding to the clean
water tank indicator is always on
The corresponding waste water tank indicator
on the screen keeps flashing. The waste
water tank to be detected is not full, and the
status light is off.
The indicator light corresponding to the
waste water tank on the screen is always on,
and goes out after the installation of the
waste water tank is detected.
The corresponding self-cleaning status
indicator on the screen is always on, and
goes out after the program ends
Condition Screen Tips Condition Screen Tips
Clean water tank is
short of water
Waste water tank full
Waste water tank not
in place
Self-cleaning start
The screen corresponds to the battery
indicator flashing WiFi enabled pairing
WiFi disconnected
WiFi connected
Voice prompts off
Voice prompts on
The corresponding WiFi indicator on
the screen is flashing and flashing
The corresponding WiFi indicator on
the screen is off
The corresponding WiFi indicator on
the screen is on
The corresponding voice indicator on
the screen is off
The corresponding voice indicator on
the screen is always on

WARNING
1. If you do not use the machine for a long time, please make sure to charge it at least once a month to avoid serious damage to the
battery due to lack of power;
2. If the appliance is still charging after the normal charging time, please stop charging immediately, otherwise the battery may generate
heat, deformation or extreme thermal effects;
3. If you need to discard the appliance, please power off the appliance and remove the battery;
4. Please dispose of used batteries safely and properly, and do not throw them into fire, water, or soil;
5. If the battery leaks and touches your skin or clothing, please rinse with clean water to avoid skin discomfort. If you still feel unwell,
seek medical attention immediately.
10
Use of self-cleaning function
After you're done cleaning,put the host back to the base in time to ensure that the water in the water purification tank is sufficient.
Short press the self-cleaning button on the right side of the fuselage, the self-cleaning prompt on the screen lights up and the
self-cleaning starts. After the self-cleaning is over, the host continues to enter the charging base, and the air-drying roller
brush can be started through the APP control.
(The self-cleaning function can only be used when it is charged and the power is more than 20%)
How to reset and clear user data
Reset: Use the tool to press the reset button for 1 sec to restore the
factory settings of the appliance
Clear user data: In shutdown mode, press the and switch buttons
at the same time and hold for ≥3 seconds to enter the factory reset
state (after clearing the user data, it will automatically shut down)

Disassembly and use of clean water tank
2. Open the sealing cover of the water inlet of the clean water tank.
1.Press down the release button of the clean water tank
and pull it out to disassemble the clean water tank.
3. Place the water inlet of the clean water tank under the
water source and fill it with about ≤720ml clear water.
4. After buckling the sealing cover of the water injection port, aim
the clean water tank at the machine and press the clean water tank
release button and push it in. After hearing the "click", the installation
is successful.
Disassembly and use of waste water tank
1. Press down on the waste water tank release button and
pull it out to remove the waste water tank.
2. After taking out the waste water, pull out the upper cover
of the waste water.
11
"Click"
3. Take out the solid-liquid separator upwards.
4. Dump the garbage and clean the solid-liquid separator.

12
WARNING
"Works with MIJIA" is only verified at the software level. Xiaomi is not responsible for the production,
standard implementation, quality supervision and other aspects of the product and the company.
This product has been connected to Mi Home and can be controlled through Mi Home APP.
Scan the product QR code, or search for "Mi Home" in the app store, download and install the Mi Home
APP; users who have installed the Mi Home APP will be directed to the device connection page.
Mi Home App Installation
Add device
Open the Mi Home APP and login to your account;
Click " " in the upper right corner of the add device
page to scan the product QR code, follow the
instructions on the page to add the device and use it.
Click "+" in the upper right corner of the APP homepage to
enter the add device page;
23
My home Add device
1
Product QR Code
6. Install the solid-liquid separator and the upper cover of the
waste watertank back to the original position and align it with
the machine, then press the waste water tank release button
and push it in. After hearing the "click", the installation is successful.
"Click"
5.Pour out the dirty water.
1. Please use the charging stand specially equipped for the floor appliance to charge.
2. If the battery is still charging after exceeding the normal charging time, please stop it immediately, otherwise there may be dangers
battery heating, deformation or extreme thermal effects.
3. Please clean up the waste water tank in time to avoid overfilling the tank causing inability to to suck in new sewage.
4. Please replenish water for the clean water tank in time to avoid water shortage when mopping the floor.
Tip: When the product QR code cannot be scanned, you can complete the device addition by searching for the product name.
In addition, due to the continuous upgrade and update of the Mi Home APP, the actual operation may be slightly different from the above
description, please follow the current instructions in the Mi Home APP.

13
Disassembly and cleaning of the waste water tank and cleaning of the optical flow sensor
1. Press down on the buckle of the waste water tank and
pull it out to disassemble the waste water;
2. Gently wipe the optical flow sensor on both sides of the
appliance body with a rag or wet paper towel;
Please turn off the appliance before cleaning. If you need to replace the parts, please use ROIDMI
designated parts to avoid damage to the product.
4. After rotating as shown in the figure, remove the protective cover
of the light guide column downwards;
Product cleaning
3. Take out the waste water tank and take out the upper cover
of the waste water tank and pour out the dirty water, then
take out the filter element upward and separate it from the
upper cover of the waste water tank;
8. Dump the garbage and clean the solid-liquid separator;
7. Take out the solid-liquid separator upwards;
5. Wash the filter element, the upper cover of the waste
water tank, and the protective cover of the light guide column
with clean water and air dry;
6. Install the filter element, the upper cover of the waste water
tank, and the protective cover of the light guide column back
to the original position;
Optical
flow
sensor
②Rotate
①Up
①Rotate
②Down

14
Cleaning of soft roller brush
1. Pull the roller brush pull ring outwards to pull the roller brush
directly;
2. Use clean water to clean the roller brush and install it back
to its original position;
Cleaning the brush cover
1. Press the roller brush cover release button and lift up to open the
cover;
2. Rinse with clean water and wipe the cover plate and install it
back in place;
NOTICE
1. After cleaning the cover, be sure to install it back to its original position to avoid the roller brush from working without protection;
2. In order not to affect the performance of the machine, it is recommended that you regularly maintain its parts;
NOTICE
1. Pay attention to the amount of waste when disassembling the waste water tank to avoid splashing of dirty water during the disassembly;
2. The filter element needs to be completely air-dried before use, so as not to cause odors and reduce filter performance;
3. When installing the recovery tank back to its original position, make sure that the filter element has been installed;
4. Please clean the optical flow sensor and light guide on the appliance regularly to avoid affecting the performance of the machine;
①
②
10. Use a cloth or wet paper towel to clean the surface of the
light guide on both sides of the filter element and install it back
in place;
Light
guide
surface
9. Use the cleaning brush to reach down into the cleaning pipe;

15
Troubleshooting
When the appliance fails to operate normally, please troubleshoot by yourself or contact customer service staff in time for troubleshooting
Failure Phenomenon
The motor does not rotate
Electric floor brush does not rotate
Reduced suction power of scrubber
Product cannot be charged
The ground can't get water
Water shortage in the water purification tank
The clean water tank is not installed
Reinstall the clean water tank
Water purification tank
The roller brush may be jammed by large
particles
Self-cleaning does not work
The machine is not charging
Machine power is less than 20%
The recovery tank is not installed in place /
the recovery tank is full
The clean water tank is not installed in place/
the clean water tank is short of water
Open the brush cover to check
Make sure the host is in the charging state
before starting the self-cleaning function
Recharge and power>20% to restart the
self-cleaning function
Reinstall or dispose of the waste water tank
Reinstall or add water to the clean water tank
The mouth of the suction nozzle is blocked
The waste water tank is full
Use time is too long, temperature is too high
Low battery
The roller brush is entangled by hair and
other objects
Wrong installation of roller brush and
waste water tank
The host and the adapter interface are
not connected well
Reconnect after checking
The recovery tank has reached the specified
capacity
Low battery
Cause Of Issue
Use soft velvet roller brush on unsuitable
ground
The floor brush is entangled with excessive
hair fibers and other long windings
Clean up foreign objects in the mouth
of the nozzle
Pour out the dirty water
Allow to cool down, restart to use
Use after fully charged
Clean the roller brush
Re-install
Pour out the waste in the waste water tank
Charge the appliance
Replace the soft velvet roller brush to
change the use environment
Clean the entanglement of the floor brush
Solution
Basic parameters
Product Name
Product Model
Product Model
Product Size
XDJ07RM / XDJ07RM*
250W
3500mAh/75.6Wh
≤78dB(A)
Noise
Smart Cordless Wet Dry
Vacuum Cleaner
Product Name
Charging Base
About35min/29min/35min
About4.5kg
Product Weight
Battery Life (Smart/Suction/
Refreshing Mode)
Nominal Voltage
Rated Input
Rated Output
Rated Power
Rated Capacity
Rated Charging Voltage
About4h
About0.72L/About0.69L*
1100×280×253mm
Product Size
Charging Time
Clean/Waste Water Tank Capacity
21.6V
27.5V
Android system version is not lower than Android 4.4,Apple device is not lower than iOS10
*The maximum storage capacity of the waste water tank without a solid-liquid separator
Remark: *could be 0-9 or A-Z, indicate for different color and accessories.
Freqency Range:2400-2483.5MHz;Maximum Transmiting Power:20dBm(EIRP)
Smart Cordless Wet Dry Vacuum Cleaner
Charging Base
315 x 315 x 165mm
Adapter Model
XDJCDZ01RM / XDJCDZ01RM*
1A27.5V
1A MAX27.5V
European Union: AD-0282750100EU;United Kingdom: AD-0282750100UK;Japan: AD-0282750100JP;
Taiwan: AD-0282750100TW;Australia: AD-0282750100AU;United States: AD-0282750100US;
Korea:AD-0282750100KC;

16
Warranty and limitations of liability
This product is guaranteed for a period of 12 months (defined by local law) from the date of purchase against any failure resulting from
manufacturing or material defects. This warranty does not cover damage caused by improper installation, improper use, or normal wear
and tear of the product.
More specifically, the warranty does not cover:
• Damage or problems caused by improper use, accident, alteration or electrical connection of improper intensity or voltage.
• Modified products, those whose warranty seal or serial number have been damaged, altered, removed or oxidized.
• Failure of the battery due to overcharging or failure to observe the safety instructions explained in the instruction manual.
• Cosmetic damage, including scratches, dents, or any other element.
• Damage caused by any intervention carried out by an unauthorised person.
• Defects caused by normal wear and tear or due to normal ageing of the product.
• Software updates due to a change in network settings.
• Product failures due to the use of third party software to modify, change or adapt the existing software.
• Product failures caused by use without accessories approved by the manufacturer.
• Oxidised products.
Terms and conditions of implementation:
To obtain a warranty service, you are requested to return your product to the customer service desk of your retail outlet with your proof
of purchase (receipt, invoice, …), the product and its supplied accessories, with its original packaging.
It is important to have the date of purchase, the model and the serial or IMEI number on hand as information (this information
usually appears on the product, the packaging or your proof of purchase).
Failing this, you must return the product with the accessories necessary for its proper operation (power supply, adaptor, etc.).
In the event that your claim is covered by the warranty, the after-sales service may, within the limits of local law, either:
• Repair or replace defective parts.
• Exchange the returned product with a product that has at least the same functionality and that is equivalent in terms of performance.
• Refund the product at the purchase price of the product mentioned on the proof of purchase.
If one of these 3 solutions is used, this does not give rise to the extension or renewal of the warranty period.
Made in China
Manufacturer: ROIDMI INFORMATION TECHNOLOGY CO., LTD.
Address: 4F, C8 BUILDING, NO. 1699 HUISHAN ROAD, LIFE SCIENCE AND TECHNOLOGY PARK, HUISHAN DISTRICT, WUXI, JIANGSU, PRC
Executive standards:
Illustrations may differ from actual product. We are constantly striving to improve our products; therefore the specifications contained
herein are subject to change without notice.
Service email: service@roidmi.com
Corporate website: www.roidmi.com/en
For product sales information, please check the website: www.roidmi.com/en
XDJ07RM _XDJ07RM* _UM_EN_No.08.2022
(EC) 1275/2008: 2008-12-17Amended by (EC) 278/2009:2009-04-06, (EC) 642/2009:2009-07-22, (EU) 617/2013:2013-06-26; (EU) 801/2013:2013-08-22 , EN 50564:2011
EN 60335-1:2012/A15:2021,EN 60335-2-2:2010/A1:2013,EN 62233:2008,EN 60335-2-10:2003/A1:2008,EN 55014-1:2017/A11:2020,EN IEC 55014-1:2021,EN
55014-2:2015,EN IEC 55014-2:2021,EN 61000-3-2:2014,EN IEC 61000-3-2:2019/A1:2021,EN 61000-3-3:2013,EN 301 489-1 V2.2.3:2019,EN 301 489-17
V3.2.4:2020,EN 61000-3-3:2013/A1:2019,EN 300 328 V2.2.2:2019,EN 50663:2017,EN 50665:2017,2011/65/EU
www.roidmi.com/en
Disposal
Correct disposal of this product
This marking indicates that this product should not be disposed with other household wastes throughout the EU.
To prevent possible harm to the environment or human health from uncontrolled waste disposal, recycle it responsibly
to promote the sustainable reuse of material resources. To return your used device, please use the return and
collection systems or contact the retailer where the product was purchased. They can take this product for
environmental safe recycling.
WATERPROOF LEVEL
IPX4
Table of contents
Other Roidmi Vacuum Cleaner manuals