Roland CM-220 User manual

2.1-Channel Monitor System
CM-220 CM-110
200W
(Main Unit 100W + Satellite Speaker 50W x 2)
Rated Power Output
Nominal Input Level (1 kHz) CH 1 (INSTRUMENT): -20 dBu, CH 2 (LINE): -10 dBu, BALANCED INPUT: +4 dBu
Input Impedance CH 1 (INSTRUMENT): 10 k ohms, CH 2 (LINE): 10 k ohms, BALANCED INPUT: 10 k ohms
2 cm (3/4 inch) Silk Dome Tweeter, 10 cm (4 inches) Fiber Cone Woofer (for each)
CH 1 [INSTRUMENT] volume knob, CH 2 [LINE] volume knob, CH 3 [DIGITAL] volume knob
WOOFER volume knob, PHASE switch
162 (W) x 197 (D) x 243 (H) mm, 6-7/16 (W) x 7-13/16 (D) x 9-5/8 (H) inches
3.1 kg / 6 lbs 14 oz (for each)
Power Cord, Speaker Cable (3.5 m) x 2, Owner’s Manual
* 0 dBu = 0.775 Vrms
* In the interest of product improvement, the specifications and/or appearance of this unit are subject to change without prior notice.
EQUALIZER [HIGH] knob, [LOW] knob, MASTER volume knob, AUTO OFF switch
CH 1 [INSTRUMENT] jacks (L/MONO, R): 1/4-inch phone type,
CH 2 [LINE] jacks (L, R, STEREO): RCA phono type, stereo miniature phone type,
CH 3 [DIGITAL] jack: coaxial type, BALANCED INPUT jacks (L, R): (XLR, 1/4-inch TRS phone type)
PHONES jack: Stereo miniature phone type,
SATELLITE SPEAKER jacks (L, R): (only for dedicated Satellite Speakers), AC IN jack
Digital Input (CH 3)
Speakers
Frequency Response
Crossover Frequency
Main Unit (Sub Woofer)
Main Unit (Sub Woofer)
Satellite Speaker
Channel Controls
Woofer Controls
Master Controls
Satellite Speaker
Main Unit (Sub Woofer)
Satellite Speaker
Controls
Connectors
Power Consumption
Dimensions
Weight
Accessories
Format: Conformity with IEC60958,
Sample Rate: 32 kHz to 192 kHz (automatically) (de-emphasis: OFF), Word Length: 24 bit
100W
(Main Unit 50W + Satellite Speaker 25W x 2)
25 cm (10 inches) Cone Type 16 cm (6.5 inches) Cone Type
125 Hz
32 Hz to 22 kHz 35 Hz to 22 kHz
67W 47W
381 (W) x 376 (D) x 413 (H) mm
15 (W) x 14-13/16 (D) x 16-5/16 (H) inches
330 (W) x 327 (D) x 368 (H) mm
13 (W) x 12-7/8 (D) x 14-1/2 (H) inches
18.8 kg / 41 lbs 8 oz 13.3 kg / 29 lbs 6 oz
ST-CMS1
Monitor Speaker Stand
CM-30 CUBE MONITOR
Attach your satellite speakers
to these stands and listen to
your music at an ideal height.
Connect a variety of sources to this best-selling monitor amp.
l High-power 30W amp in a compact body.
l Three channels and two AUX INs for five simultaneous inputs. Supports a wide range of applications
ranging from instruments, audio playback, live monitoring, and basic sound reinforcement.
l Channels 2 and 3, and AUX INs support stereo inputs.
l Stereo Link function lets you connect two CM-30 units for a total of ten simultaneous input channels
for stereo playback.
CM-220 Main Unit (Sub Woofer)CM-220/CM-110 Satellite Speaker CM-110 Main Unit (Sub Woofer)
nSetup examples
nRelated product
nOption nSpecifications
381 mm (15") 376 mm (14-13/16")
413 mm (16-5/16")
162 mm (6-7/16") 197 mm (7-13/16")
243 mm (9-5/8")
330 mm (13") 327 mm (12-7/8")
368 mm (14-1/2")
Experience the diverse and expressive
series of Roland amps on the web: http://www.roland.com/amp/
l Steel stands provide excellent stability.
l Flexible height adjustment to suit your
monitoring environment.
l Supported speakers: CM-220, CM-110, CM-30,
MOBILE CUBE
High-quality sound with full-range performance
Hear and feel your music to the fullest with 2.1-channel sound
Visit us online at www.Roland.com
Printed in Japan Jan. 2012 RAM-4736 GR-GEN-SS I3
All specifications and appearances are subject to change without notice.
Roland, CUBE MONITOR and V-Drums are either registered trademarks or
trademarks of Roland Corporation in the United States and/or other countries.
Company names and product names appearing in this document are registered trademarks or
trademarks of their respective owners.
It is forbidden by law to make an audio recording, video recording, copy or revision of a third party’s
copyrighted work (musical work, video work, broadcast, live performance, or other work), whether in
whole or in part, and distribute, sell, lease, perform, or broadcast it without the permission of the
copyright owner.
Do not use this product for purposes that could infringe on a copyright held by a third party.
We assume no responsibility whatsoever with regard to any infringements of third-party copyrights
arising through your use of this product.

Adjust overall volume and sub-woofer volume.
Use the PHASE switch to make phase corrections.
Define the balance
between lows and highs.
The unit will automatically turn off if it does not detect
a signal after a specified amount of time of inactivity.
Adjust the balance of different
inputs during mixing.
USB audio interface or
keyboard with digital output
Audio player
Headphones Mixer
Keyboard/V-Drums
100w
50w 50w 50w 25w 25w
l2.1-channel system for wide-range reproduction of electronic
instruments and computer music.
lSatellite speaker nets can be removed depending on application,
environment, or personal preference.
lOptional speaker stands provide ideal listening position.
2.1-channel monitoring creates a full-frequency musical landscape.
Highly versatile, can be used for instrument performances and music
production.
nHigh-fidelity 2.1-channel design handles a diverse range of input
Custom-made speakers with quality components — the CM-220/CM-110 tweeter,
made of a silk dome diaphragm and aluminum voice coil, delivers delicate and clear
sound. The woofer is made of an aluminum deposition-treated fiber cone that provides
excellent suppleness and rigidity to reproduce thick mids and lows, while the long-stroke
subwoofer reproduces ultra-low frequencies, including the dynamic tones created by
bass drums. All of these factors have been comprehensively tuned in this 2.1-channel
system to achieve full-frequency sounds that are optimally balanced.
nDurable, protective circuitry for instruments, home entertainment
systems, and beyond
The CM-220/CM-110 system speakers and amplifiers are equipped with protection circuits to tame wide
dynamic ranges and/or continuous high levels from instruments such as synthesizers, V-Drums, etc. These
CUBEs are built to withstand an arsenal of hot gear and input levels. The rich, deep sound also makes this
system ideal for home-entertainment listening. Fill your home or personal studio with powerful sound and
enjoy music in the proper full-range format for which it was created.
nHands-on control, flexible connectivity
The flexible input types let you connect a wide variety of analog and digital gear, including electronic
instruments, audio-playback gear, even computers. Each of the three stereo input channels has a
dedicated volume knob, with a Master volume knob to control all three simultaneously. A Phase switch
instantly changes the phase of the sound being output from the subwoofer, helping find its ideal
placement. The two EQ knobs adjusts the volumes of the lower and upper ranges, while the Woofer knob
adjusts the output volume of the subwoofer.
nTop Panel
nRear Panel
CUBE MONITOR
Main Unit (Woofer) 100W + Satellite Speakers 50W x 2
CUBE MONITOR
Main Unit (Woofer) 50W + Satellite Speakers 25W x 2
Ideal for all styles of music
Computer
Music
Keyboards
Drums
Home
Entertainment
Powerful model
with
200W output
Compact model
with
100W output
Play back audio in your living room; amplify your instruments.
Enjoy the complete power and presence of 2.1-channel sound.
* Top- and rear-panel specifications are the same for CM-220 and CM-110.
Use this as a monitor for keyboard instruments such as synths and
digital pianos. Experience the powerful sound of synths and the rich
expression of pianos.
Use in conjunction with your computer and audio interface for music
production. Faithfully reproduces a wide range of sounds from a
diverse range of sources.
Use as a sound monitor for Roland V-Drums and other electronic
drum kits. Experience full-range sound — from the sparkle of cymbals
to the powerful lows of kick drums.
Stylish Sound
2.1-Channel Monitor System
Today’s electronic musical instruments deliver an extreme range of sound, from the deepest, thundering lows
to glass-shattering highs. Roland is pleased to announce a new nearfield monitoring series built specifically to
handle the demands of modern synthesizers, electronic drums, media-production gear, and the like.
The CM-220 and CM-110 are 2.1-channel systems with custom-made speakers and integrated protection circuits
that can take a full-frequency beating while providing fantastic sound, high performance, and CUBE reliability.
Hear and feel your music to the fullest with these powerhouse CUBEs.
Powerful, Full-Range Monitoring
Wide range
(high-fidelity 2.1-channel)
Excellent durability
(protection circuit)
Mixing
(supports a variety of inputs)

Adjust overall volume and sub-woofer volume.
Use the PHASE switch to make phase corrections.
Define the balance
between lows and highs.
The unit will automatically turn off if it does not detect
a signal after a specified amount of time of inactivity.
Adjust the balance of different
inputs during mixing.
USB audio interface or
keyboard with digital output
Audio player
Headphones Mixer
Keyboard/V-Drums
100w
50w 50w 50w 25w 25w
l2.1-channel system for wide-range reproduction of electronic
instruments and computer music.
lSatellite speaker nets can be removed depending on application,
environment, or personal preference.
lOptional speaker stands provide ideal listening position.
2.1-channel monitoring creates a full-frequency musical landscape.
Highly versatile, can be used for instrument performances and music
production.
nHigh-fidelity 2.1-channel design handles a diverse range of input
Custom-made speakers with quality components — the CM-220/CM-110 tweeter,
made of a silk dome diaphragm and aluminum voice coil, delivers delicate and clear
sound. The woofer is made of an aluminum deposition-treated fiber cone that provides
excellent suppleness and rigidity to reproduce thick mids and lows, while the long-stroke
subwoofer reproduces ultra-low frequencies, including the dynamic tones created by
bass drums. All of these factors have been comprehensively tuned in this 2.1-channel
system to achieve full-frequency sounds that are optimally balanced.
nDurable, protective circuitry for instruments, home entertainment
systems, and beyond
The CM-220/CM-110 system speakers and amplifiers are equipped with protection circuits to tame wide
dynamic ranges and/or continuous high levels from instruments such as synthesizers, V-Drums, etc. These
CUBEs are built to withstand an arsenal of hot gear and input levels. The rich, deep sound also makes this
system ideal for home-entertainment listening. Fill your home or personal studio with powerful sound and
enjoy music in the proper full-range format for which it was created.
nHands-on control, flexible connectivity
The flexible input types let you connect a wide variety of analog and digital gear, including electronic
instruments, audio-playback gear, even computers. Each of the three stereo input channels has a
dedicated volume knob, with a Master volume knob to control all three simultaneously. A Phase switch
instantly changes the phase of the sound being output from the subwoofer, helping find its ideal
placement. The two EQ knobs adjusts the volumes of the lower and upper ranges, while the Woofer knob
adjusts the output volume of the subwoofer.
nTop Panel
nRear Panel
CUBE MONITOR
Main Unit (Woofer) 100W + Satellite Speakers 50W x 2
CUBE MONITOR
Main Unit (Woofer) 50W + Satellite Speakers 25W x 2
Ideal for all styles of music
Computer
Music
Keyboards
Drums
Home
Entertainment
Powerful model
with
200W output
Compact model
with
100W output
Play back audio in your living room; amplify your instruments.
Enjoy the complete power and presence of 2.1-channel sound.
* Top- and rear-panel specifications are the same for CM-220 and CM-110.
Use this as a monitor for keyboard instruments such as synths and
digital pianos. Experience the powerful sound of synths and the rich
expression of pianos.
Use in conjunction with your computer and audio interface for music
production. Faithfully reproduces a wide range of sounds from a
diverse range of sources.
Use as a sound monitor for Roland V-Drums and other electronic
drum kits. Experience full-range sound — from the sparkle of cymbals
to the powerful lows of kick drums.
Stylish Sound
2.1-Channel Monitor System
Today’s electronic musical instruments deliver an extreme range of sound, from the deepest, thundering lows
to glass-shattering highs. Roland is pleased to announce a new nearfield monitoring series built specifically to
handle the demands of modern synthesizers, electronic drums, media-production gear, and the like.
The CM-220 and CM-110 are 2.1-channel systems with custom-made speakers and integrated protection circuits
that can take a full-frequency beating while providing fantastic sound, high performance, and CUBE reliability.
Hear and feel your music to the fullest with these powerhouse CUBEs.
Powerful, Full-Range Monitoring
Wide range
(high-fidelity 2.1-channel)
Excellent durability
(protection circuit)
Mixing
(supports a variety of inputs)

2.1-Channel Monitor System
CM-220 CM-110
200W
(Main Unit 100W + Satellite Speaker 50W x 2)
Rated Power Output
Nominal Input Level (1 kHz) CH 1 (INSTRUMENT): -20 dBu, CH 2 (LINE): -10 dBu, BALANCED INPUT: +4 dBu
Input Impedance CH 1 (INSTRUMENT): 10 k ohms, CH 2 (LINE): 10 k ohms, BALANCED INPUT: 10 k ohms
2 cm (3/4 inch) Silk Dome Tweeter, 10 cm (4 inches) Fiber Cone Woofer (for each)
CH 1 [INSTRUMENT] volume knob, CH 2 [LINE] volume knob, CH 3 [DIGITAL] volume knob
WOOFER volume knob, PHASE switch
162 (W) x 197 (D) x 243 (H) mm, 6-7/16 (W) x 7-13/16 (D) x 9-5/8 (H) inches
3.1 kg / 6 lbs 14 oz (for each)
Power Cord, Speaker Cable (3.5 m) x 2, Owner’s Manual
* 0 dBu = 0.775 Vrms
* In the interest of product improvement, the specifications and/or appearance of this unit are subject to change without prior notice.
EQUALIZER [HIGH] knob, [LOW] knob, MASTER volume knob, AUTO OFF switch
CH 1 [INSTRUMENT] jacks (L/MONO, R): 1/4-inch phone type,
CH 2 [LINE] jacks (L, R, STEREO): RCA phono type, stereo miniature phone type,
CH 3 [DIGITAL] jack: coaxial type, BALANCED INPUT jacks (L, R): (XLR, 1/4-inch TRS phone type)
PHONES jack: Stereo miniature phone type,
SATELLITE SPEAKER jacks (L, R): (only for dedicated Satellite Speakers), AC IN jack
Digital Input (CH 3)
Speakers
Frequency Response
Crossover Frequency
Main Unit (Sub Woofer)
Main Unit (Sub Woofer)
Satellite Speaker
Channel Controls
Woofer Controls
Master Controls
Satellite Speaker
Main Unit (Sub Woofer)
Satellite Speaker
Controls
Connectors
Power Consumption
Dimensions
Weight
Accessories
Format: Conformity with IEC60958,
Sample Rate: 32 kHz to 192 kHz (automatically) (de-emphasis: OFF), Word Length: 24 bit
100W
(Main Unit 50W + Satellite Speaker 25W x 2)
25 cm (10 inches) Cone Type 16 cm (6.5 inches) Cone Type
125 Hz
32 Hz to 22 kHz 35 Hz to 22 kHz
67W 47W
381 (W) x 376 (D) x 413 (H) mm
15 (W) x 14-13/16 (D) x 16-5/16 (H) inches
330 (W) x 327 (D) x 368 (H) mm
13 (W) x 12-7/8 (D) x 14-1/2 (H) inches
18.8 kg / 41 lbs 8 oz 13.3 kg / 29 lbs 6 oz
ST-CMS1
Monitor Speaker Stand
CM-30 CUBE MONITOR
Attach your satellite speakers
to these stands and listen to
your music at an ideal height.
Connect a variety of sources to this best-selling monitor amp.
l High-power 30W amp in a compact body.
l Three channels and two AUX INs for five simultaneous inputs. Supports a wide range of applications
ranging from instruments, audio playback, live monitoring, and basic sound reinforcement.
l Channels 2 and 3, and AUX INs support stereo inputs.
l Stereo Link function lets you connect two CM-30 units for a total of ten simultaneous input channels
for stereo playback.
CM-220 Main Unit (Sub Woofer)CM-220/CM-110 Satellite Speaker CM-110 Main Unit (Sub Woofer)
nSetup examples
nRelated product
nOption nSpecifications
381 mm (15") 376 mm (14-13/16")
413 mm (16-5/16")
162 mm (6-7/16") 197 mm (7-13/16")
243 mm (9-5/8")
330 mm (13") 327 mm (12-7/8")
368 mm (14-1/2")
Experience the diverse and expressive
series of Roland amps on the web: http://www.roland.com/amp/
l Steel stands provide excellent stability.
l Flexible height adjustment to suit your
monitoring environment.
l Supported speakers: CM-220, CM-110, CM-30,
MOBILE CUBE
High-quality sound with full-range performance
Hear and feel your music to the fullest with 2.1-channel sound
Visit us online at www.Roland.com
Printed in Japan Jan. 2012 RAM-4736 GR-GEN-SS I3
All specifications and appearances are subject to change without notice.
Roland, CUBE MONITOR and V-Drums are either registered trademarks or
trademarks of Roland Corporation in the United States and/or other countries.
Company names and product names appearing in this document are registered trademarks or
trademarks of their respective owners.
It is forbidden by law to make an audio recording, video recording, copy or revision of a third party’s
copyrighted work (musical work, video work, broadcast, live performance, or other work), whether in
whole or in part, and distribute, sell, lease, perform, or broadcast it without the permission of the
copyright owner.
Do not use this product for purposes that could infringe on a copyright held by a third party.
We assume no responsibility whatsoever with regard to any infringements of third-party copyrights
arising through your use of this product.