Roland V-Combo VR-760 Technical manual

VR-760 System Update
Compact Flash Update
Tools Needed:
1. VR-760 UPDATE DATA for SERVICE CD-ROM (#17041265)
2. Compact Flash (4 MB or more)
3. Computer with a Compact Flash reader/writer
Procedure:
Create the update card:
1. Turn on the computer.
2. Insert an 8 MB or greater Compact Flash in the Compact Flash reader/writer connected
to the computer and format the card.
3. Insert the UPDATE CD-ROM (17041265) in the computer and display the CD-ROM’s
“CARD”
4. folder.
5. Copy the files in “CARD” to the Compact Flash.
Update Procedure:
NOTE: Never turn off the VR-760’s power while the update is in progress.
1. Insert the formatted update card in the VR-760.
2. Hold down ONE TOUCH ORGAN and H-BAR MANUAL, and turn on the power to the
VR-760.
A screen like the following appears in the LCD, and the program update begins
automatically.
3. When the update is completed, turn off the power to the VR-760.

SMF Update
NOTE: Never turn off the VR-760’s power while the update is in progress.
Tools Needed:
1. VR-760
2. VR-760 SMF Update Files
3. Sequencer Capable of Playing SMF Data
4. MIDI Cable
Procedure:
1. Connect the MIDI “Out” of the sequencer to the MIDI “In” of the VR-760.
2. While holding down ONE TOUCH ORGAN and H-BAR MANUAL, turn on the power
to the VR-760.
3. The following will be displayed:
4. Play each file in numeric order.
5. After all files have been sent the following will be displayed:
6. Power off the VR-760.
7. Power on the VR-760 normally.
© 2003 Roland Corporation U.S.