Rolfstone Luna User manual
EN 1EN 1
EN User Manual
NL Gebruiksaanwijzing
LunaLuna
EN 1EN 1 EN 2EN 2
Control buttonControl button
MicrophoneMicrophone
ReplaceableReplaceable
eartipeartip
USB-CUSB-C
DisconnectDisconnect
buttonbutton
Battery indicatorBattery indicator
EN 3EN 3 EN 4EN 4
Functions & controlsFunctions & controls
The control button lets you control the connected smartphone and setThe control button lets you control the connected smartphone and set
ANC modes on the earbuds.ANC modes on the earbuds.
•• Play / pausePlay / pause
Press 1x (left or right earbud).Press 1x (left or right earbud).
•• Next trackNext track
Press right earbud 2x.Press right earbud 2x.
•• Previous trackPrevious track
Press left earbud 2x.Press left earbud 2x.
•• Volume upVolume up
Press right earbud for 2 sec.Press right earbud for 2 sec.
•• Volume downVolume down
Press left earbud for 2 sec.Press left earbud for 2 sec.
•• Accept incoming call / end a callAccept incoming call / end a call
Press 1x (left or right earbud).Press 1x (left or right earbud).
•• Reject incoming callReject incoming call
Press 2 sec. (left or right earbud).Press 2 sec. (left or right earbud).
•• Activate ANC / AmbientActivate ANC / Ambient
Press the right earbud 3x to switch between the modesPress the right earbud 3x to switch between the modes
(ANC on, Ambient, ANC o). ANC is o by default.(ANC on, Ambient, ANC o). ANC is o by default.
•• Voice assistantVoice assistant
Press left earbud 3x.Press left earbud 3x.
•• Turn the Rolfstone Luna onTurn the Rolfstone Luna on
Open the charging case.Open the charging case.
•• Turn the Rolfstone Luna oTurn the Rolfstone Luna o
Place the earbuds in the charging case and close it.Place the earbuds in the charging case and close it.
EN 5EN 5 EN 6EN 6
Connect for the rst timeConnect for the rst time
A manual connection must be made when the earbuds have not beenA manual connection must be made when the earbuds have not been
connected to a Bluetooth device before:connected to a Bluetooth device before:
1.1. Open the charging case.Open the charging case.
2.2. Both earbuds will automatically turn on and will pair with each other.Both earbuds will automatically turn on and will pair with each other.
3.3. Open the Bluetooth settings on your device and activate Bluetooth.Open the Bluetooth settings on your device and activate Bluetooth.
4.4. Wait until Rolfstone Luna appears and select it. The earbuds are readyWait until Rolfstone Luna appears and select it. The earbuds are ready
to use.to use.
More information and instruction videos can be foundMore information and instruction videos can be found
at www.rolfstone.com/en/faq/at www.rolfstone.com/en/faq/
Automatically reconnectAutomatically reconnect
The earbuds will automatically reconnect to the last connected device.The earbuds will automatically reconnect to the last connected device.
On the previously connected device:On the previously connected device:
•• Bluetooth must be enabled.Bluetooth must be enabled.
•• Rolfstone Luna needs to be in the list of devices.Rolfstone Luna needs to be in the list of devices.
1.1. Open the charging case.Open the charging case.
2.2. Both earbuds will automatically turn on and will pair with each other.Both earbuds will automatically turn on and will pair with each other.
Hereafter the earbuds will search for a known Bluetooth device andHereafter the earbuds will search for a known Bluetooth device and
automatically connect to it.automatically connect to it.
More information and instruction videos can be foundMore information and instruction videos can be found
at www.rolfstone.com/en/faq/at www.rolfstone.com/en/faq/
EN 7EN 7 EN 8EN 8
Disconnect the earbudsDisconnect the earbuds
By disconnecting the earbuds are free to connect to another device.By disconnecting the earbuds are free to connect to another device.
There are two methods to do this:There are two methods to do this:
Method 1:Method 1: at the bottom of the charging case you will nd theat the bottom of the charging case you will nd the
disconnect button. Place the earbuds in the case and keepdisconnect button. Place the earbuds in the case and keep
the case opened.the case opened.
Press the button for 2 seconds. The earbuds will disconnectPress the button for 2 seconds. The earbuds will disconnect
after a few seconds.after a few seconds.
Method 2:Method 2: open the Bluetooth settings on your device andopen the Bluetooth settings on your device and
disconnect the Rolfstone Luna.disconnect the Rolfstone Luna.
If you want to reconnect the earbuds later, follow the steps on page 5.If you want to reconnect the earbuds later, follow the steps on page 5.
Good to knowGood to know
•• The earbuds and the device must be within 10 meters (or 33 feet) ofThe earbuds and the device must be within 10 meters (or 33 feet) of
each other.each other.
•• Intermediate objects such as walls can shorten the range.Intermediate objects such as walls can shorten the range.
•• The earbuds can connect to one device at a time.The earbuds can connect to one device at a time.
•• The Rolfstone Luna earbuds will automatically turn o when placed inThe Rolfstone Luna earbuds will automatically turn o when placed in
the charging case and when the case is closed.the charging case and when the case is closed.
•• More information and instructions can be found onMore information and instructions can be found on
•• www.rolfstone.com/en/faq/www.rolfstone.com/en/faq/
•• If you still have questions, please do not hesitate to contact us (p15).If you still have questions, please do not hesitate to contact us (p15).
•• The Rolfstone Nova Sport earbuds are rain and sweat resistant.The Rolfstone Nova Sport earbuds are rain and sweat resistant.
However, they are not completely waterproof. Do not wash themHowever, they are not completely waterproof. Do not wash them
under running water or use them underwater.under running water or use them underwater.
Table of contents
Other Rolfstone Headphones manuals
