ROLLS
JOINABLE
10 CHANNEL
HEADPHONE
AMPLIFIER
ROLLS
5968 SOUTH 350 WEST S.L.C.,UT 84107
PHONE: 801-263-9053
FAX: 801-236-9068
RA102
DATA SHEET FOR RA102 www.rolls.com
LINKABLE WITH THE JOIN IN/OUT
OUTPUTS ON FRONT AND BACK
TEN CHANNEL HEADPHONE AMP
MADE IN USA
675889 01020 6
SPECIFICATIONS
Input Impedance: 10K Ohms unbalanced
Max Input Level: +18 dBV
Input Connectors: RCA, R & L balanced XLR
Outputs: 10: 1/4" TRS Stereo jacks
10: 1/8" (3.5 mm) TRS Stereo jacks
Max Gain: 20 dB/Channel
Max Output Power: up to 250 mW/side, 500 mW/Channel
Frequency Response: 20 Hz - 30 kHz
S/N Ratio: 90 dB
THD: <.008%
IMD: <.008%
Phase Shift (In to Out): 0 deg.
Slew Rate: 2 V per microsecond
Crosstalk: - 65 dB
Power: 12 VAC (Rolls Model PS12)
Weight: 7 lbs (3KG)
Size: 19” x 1.75” x 3.125” (48cm x 4.5cm x 17cm)
Headphone impedance: 8 Ohms to 1000 Ohms
The Rolls RA102 is a ten channel professional
headphone amplier. Designed with volume
controls and 1/8”headphone outputs on the
front of the unit, along with 1/4” headphone
outputs on the back of the RA102 for each
channel. The RA102 has the connections for
any professional application. The join function
allows many RA102’s to be linked together
with out any signal loss or impedance issues.
XLR balance inputs and RCA stereo inputs on
the back of the RA102.
MADE IN USA
www.rolls.com
OUT
IN
MAIN OUTPUTS
ROLLS
PS12
SERIAL NUMBER
OUT
OUT
OUTOUTOUTOUT OUT OUT OUT
clip
MADE IN USA
www.rolls.com RA102
PROFESSIONAL TEN CHANNEL HEADPHONE AMP
PWR
OUT
