Rompa TheraGym Over the Moon Swing Set B User manual

1. Product Name
TheraGym® Over the Moon Swing Set B
2. Product Code
21583
3. Colour
As shown
4. Brief Description
Provide many opportunities to experience multi-sensory input. Each set includes a half
moon-shaped support made of strong Baltic birch wood, a heavy-duty bar strap and several
options to secure these to your suspension system.

5. Contents
1 x Half-moon wooden bar
1 x Heavy-duty green bar strap
1 x Trapeze Bar attachment
2 x reinforced nylon straps
2 x Acrobat Rings
2 x Safety Snaps
Please note: the reinforced nylon straps may be supplied already attached to the Trapeze Bar
attachment
6. Snoezelen® Stimulations
Vestibular
7. Best Use
Use from a safe and appropriate suspension system.
8. Compatible ROMPA® Products
21928 –Hanging Bracket
21559 –Safety Rotational Device
23011 (21570, 21590) –Safety Snap
See www.rompa.com for mats and a large range of Sensory Integration products
9. Starting Up
There are no short-cuts when setting up and using Sensory Integration equipment.
Please keep these instructions in a safe place and refer to them before each use.

10. Detailed Description
Over the Moon Set B
Provide many opportunities to experience multi-sensory input. Each set includes a half
moon-shaped support made of strong Baltic birch wood, a heavy-duty bar strap and several
options to secure these to your suspension system. Working load: 136kg (300 lbs).
Set B includes an 81cm Trapeze Bar and a set of 2 Acrobat Rings (either can be attached to
the half-moon-shaped support with 91cm reinforced nylon straps) and 2 Safety Snaps to
attach the straps to the wooden support.
11. Safety
Always supervise the use of this product
Always use the Rotational Device to help prevent wear of your swing and the
suspension points.
Do not exceed the working load: 136kg (300 lbs).
Sensory Integration products are intended to be used by professionals.
Use safety mats on the floor, as well as on the walls as necessary.
Use a safety helmet, and any other appropriate safety measures if required for your
client’s needs.
Use only steel safety snaps as aluminium safety snaps wear more quickly.
For indoor use only.
Check all hardware and stitching before each use to check these are intact.
This product is not a toy. Any activity involving motion, height, or rotation may cause serious
injury. This product is intended for use under the supervision of trained professionals.
12. Technical Specification
Working load: 136kg (300 lbs)
Size: Trapeze Bar 81cmL
Reinforced nylon straps 91cmL

13. Installation
Allow plenty of unobstructed space around your swing. Suspended equipment needs a
minimum ceiling height of 2.5m (8 feet). Suspended equipment should be positioned a clear
distance of 1.8m (6 feet) from walls and obstacles.
1. Pinch together one section of the green bar strap and thread it through the centre
hole at the top of the half-moon bar.
2. Pass one portion of the green bar strap loop through the loop on the other side of
the half-moon bar and pull tight.
3. Connect a locking Safety Snap to the green bar strap loop, then hook the Safety Snap
to your suspension system.

4. Hook the Safety Snaps from the swing or accessory you wish to attach to the holes
on each opposite end of the half-moon bar.
5. To attach the Acrobat Rings to the straps, thread one end of the strap through the
Acrobat Ring.
6. Pull one end of the strap through the loop on the other end of the strap.

7. Pull tight so that the threaded loop secures the ring on one end.
8. Attach the open loop end of the strap with a Safety Snap to the half-moon bar at one
of the end holes.
9. To attach the Trapeze Bar, open the loop on one end of the strap and slide it on to
one end of the Trapeze Bar, sliding it towards the middle of the bar just past the hole
at the bar’s end.
10. With the threaded loop to the inside of the hole in the bar, pinch the open loop end
of the strap and thread it through the hole in the bar.

11. Pull the strap all the way through the hole in the bar and then slide the threaded
loop to the outside of the bar so that it touches, but can’t go past, the hanging strap. Pull
the hanging strap straight and attach to the half-moon bar with a Safety Snap. Repeat for
the other strap on the other side of the bar.
Safety Snaps
Our Safety Snaps and the included Carabiner can be locked.
Turn the locking nut to open the snap (to slide this nut down to
allow the snap to be opened). Turn the nut in the opposite
direction to slide it up and over the opening to lock it.

[Grab your reader’s attention
with a great quote from the
document or use this space to
emphasize a key point. To place
this text box anywhere on the
page, just drag it.]
Safety Snap
Heavy-duty green bar strap
Trapeze Bar
Half-moon wood bar
Acrobat Ring
Safety Snap
Reinforced
nylon rope
Reinforced
nylon rope

14. Care and Maintenance
1. All the parts of your suspended products should be checked on a regular basis (at least
monthly, and more if the swing is used often). Use a maintenance sheet (such as the
example one provided) to record these checks.
2. Check all the parts for signs of wear and tear before each use and replace these as
appropriate. For example, check the ropes and straps for loose stitching.
3. Use and store this product indoors, in a safe place.
4. Dust or wipe the components clean with a damp cloth. Do not immerse in water.
Allow to dry before use.
15. Troubleshooting
Not applicable
Further copies of these instructions can be downloaded at www.rompa.com
We hope you find our instructions invaluable. If you have any suggestions for improving
them further your comments will be greatly received –please contact us at
[email protected]
THERAGYM® OVER THE MOON SET B 21583, January 2020
Copyright ROMPA® Ltd

SENSORY INTEGRATION MAINTENANCE CHECK LIST
PRODUCT: ……………………………………………….
TO CHECK
Date / S (Satisfactory) or R (Repair/replace)