Rompa 21605 User manual

1. Product Name
Roller Slide Attachment
2. Product Code
21605
3. Colour
Likely to be as shown
4. Brief Description
You’re in for a bumpy ride! Simply hooks onto the ladder bars of the Climb and Go – Set of
2 (21554) as a horizontal bridge (using both) or as a slide (using just one).
5. Contents
1 x Roller Slide Attachment (already assembled, with 6 bars)
Shown above with one of the units in the Climb and
Go Set (not included)

6. Snoezelen® Stimulations
Touch
7. Best Use
For use by a suitably qualified professional, in a safely-located and appropriate place.
For indoor use only.
8. Compatible ROMPA® Products
Please visit www.rompa.com for details about our full range.
21554 Climb and Go –Set of 2
12658 ROMPA® Mat
9. Starting Up
There are no short-cuts to setting up Sensory Integration products. Read all instructions
thoroughly before installing and using the Roller Slide Attachment and keep the
instructions in a safe place.
10. Detailed Description
You’re in for a bumpy ride! Simply hooks onto the ladder bars of the Climb and Go – Set of
2 (21554) as a horizontal bridge (using both) or as a slide (using just one). Offers sensory
stimulation (vibration), strengthening practice, bilateral coordination and core stability.
Rollers are vinyl-covered.
Working load: 90kg (200 lbs)

11. Safety
Always supervise the use of this product.
This product is not a toy. Any activity involving motion, height, or rotation may cause serious
injury. This product is intended for use under the supervision of trained professionals.
Do not exceed the 90kg (200lbs) working load.
This equipment is intended for professional clinical use only under supervised
conditions by a trained specialist. Use without proper supervision or knowledge is
potentially dangerous and should not be undertaken or permitted. Before using
these products, make sure you know your limitations and that of your equipment.
Client safety is dependent on the appropriate choice of activity to match, yet
challenge physical ability.
The layout of the activity area, proper installation and maintenance of equipment is
critical –use this product appropriately and safely.
Do not use or store outside.
Take time to familiarize yourself with the use and maintenance of this equipment
before using and file these instructions in an accessible location. These instructions
must be read and be familiar to anyone who is using this equipment.
All parts of the product should be thoroughly checked at least on a monthly basis
and before use.
Check all points where movement occurs for wear of any kind. All wear points
should be checked regularly and recorded on the maintenance checklist enclosed to
monitor their condition. Worn parts should be replaced or repaired immediately.
Clients should wear a safety helmet as necessary.
Floor mats of an appropriate thickness should be positioned properly underneath
and around all equipment. Wall matting/cushioning should also be considered if
appropriate.
Risk assess before use. Inspect equipment for wear and tear before use and
discontinue use if any doubt.
12. Technical Specification
Size: 161L x 66W x 14.5cmH
Working load: 90kg (200lbs)
Materials: Phthalate-free

13. Installation
Please check equipment immediately for any damage that may have resulted during
shipping. If any damage has occurred, please contact ROMPA® immediately.
1. Make sure that the unit you are attaching the Roller Slide Attachment to (e.g. 21554
Climb and Go –Set of 2 or a wall-mounted frame intended for balance beams, PE
equipment etc of a comparable weight) is on a flat and level surface. Attach the
Roller Slide Attachment to the desired rung by hooking both the Roller Slide end
hooks securely over the rung.

14. Care and Maintenance
1. Wipe down with a soft cloth dampened with a very mild soap solution and allow to
air-dry naturally. Do not use large amounts of liquid and do not immerse any part of
this product in water. If this product is exposed to wet conditions or left outside, the
moisture will cause the wood to swell and break apart.
2. Use and store in a dry environment.
15. Troubleshooting
Not applicable
Further copies of these instructions can be downloaded at www.rompa.com
We hope you find our instructions invaluable. If you have any suggestions for improving
them further your comments will be greatly received –please contact us at
[email protected]
ROLLER SLIDE ATTACHMENT 21605, May 2015
Copyright ROMPA® Ltd

SENSORY INTEGRATION MAINTENANCE CHECK LIST
PRODUCT: ……………………………………………….
TO CHECK
Date / S (Satisfactory) or R (Repair/replace)