Ronix 8500 User manual

LI-ION CORDLESS SCREWDRIVER
8500

USER MANUAL 1
TECHNICAL SPECIFICATIONS
Model 8500
Battery Chemistry Lithium
Chuck Capacity 6.25mm-1/4 inch
Battery Voltage 3.6V
Battery Capacity 1.5Ah
Max Torque 3NM
Charging Time 3-5 Hours
No-load RPM 0-200 RPM
Weight 600gr
Accessories 1 fast charger, 102 pcs of
drill bits & sockets
PART LIST
Magnetic
bit Holder
LED
On/Off Switch
Protective
Rubber
Nose Piece
Grip
Charger
Adaptor

CORDLESS SCREWDRIVER
2
GENERAL POWER TOOL SAFETY WARNINGS
WARNING!
.READ ALL SAFETY WARNINGS AND INSTRUCTIONS.
Failure to follow the warnings and instructions may result in electric
shock, re and/or serious injury.
SAVE ALL WARNINGS AND INSTRUCTIONS FOR FUTURE REFERENCE
The term “power tool” in all of the warnings refers to your mains-operated
(corded) power tool or battery-operated (cordless) power tool.
WORK AREA SAFETY
Keep work area clean and well lit. cluttered or dark areas invite accidents.
Do not operate piower tools in explosive atmospheres, such as in the pres-
ence of ammable liquds, gases or dust. Power tools create sparks which
may ignite the dust or fumes.Keep children and bystanders away while
operating a power tool. distractions can cause you to lose control.
Electrical safety
Power tool plugs must match the outlet. Never modify the plug in any
way. Do not use any adapter plugs with earthed (grounded) power tools.
Unmodied plugs and matching outlets will reduce risk of electric shock.
Avoid body contact with earthed or grounded suffaces such as pipes,
radiators, ranges and refrigerators. There is an increased risk of electric

USER MANUAL 3
shock if your body id earthed or graounded.
-Do not expose power tools to rain or wet conditions. Water entering a
power tool will increase the risk of electric shock.
-Do not abuse the cord. Never use the cord for carrying, pulling or
unplugging the power tool. keep cord away from heat, oil, sharp
edges or moving parts. Damaged or entangled cords increase the
risk of electric shock.
- When operating a power tool outdoors, use an extension cord suitable
for outdoor use.
- Use of a cord suitable for outdoor use reduces the risk of electric shock.
If operating the power tool in damp locations is unavoidable, use a
Graound Fault Circuit Interrupter (GFCI) protected supply. Use of an
CFCI reduce the risk of electric shock.
PERSONAL SAFETY
Stay alert, watch what you are doing and use common sense when
operating a power tool. Do not use a power tool while you are tired
or under the influence of drugs, alcohol or medication. A moment
of inattention while operating power tools may result in serious
personal injury.
Use personal protective equipment. Always wear eye protection. Protective
equipment such as dust mask, non-skid safety shoes, h ard hat, or hearing

CORDLESS SCREWDRIVER
4
protection used for appropriate conditions will reduce personal injuries.
PREVENT UNINTENTIONAL STARING.
Ensure the switch is in the off-position before connecting to power source
and/or battery pack, picking up or carrying the tool. carrying power tools
with your nger on the switch or energizing power tools that have the
switch on invites accidents.
Remove any adjusting key or wrench before turning the power tool on.
A wrench or a key left attached to a rotating part of the power tool may
result in personal injury.
Do not overreach. Keep proper footing and balance at all times. This
enables better control of the power tool in unexpected situations.
Dress properly. Do not wear loose clothing or jewelry. Keep your hair,
clothing and gloves away from moving parts. Loose clothes, jewelry or
long hair can be caught in moving parts.
If devices are provided for the connection of dust extraction and collec-
tion facilities, ensure these are connected and properly used. Use of
dust collection can reduce dust-related hazards.
POWER TOOL USE AND CARE
Do not force the power tool. use the correct power tool for your application.
The correct power tool will do the job better and safer at the rate for which
it was designed.

USER MANUAL 5
Do not use the power tool if the switch does not turn in on and off. Any
power tool that cannot be controlled with the switch is dangerous and
must be repaired.
Disconnect the plug from the power source and/or the battery pack from
the power tool before making any adjustments, changing accessories,
or storing power tools. Such preventive safety measures reduce the risk
of starting the power tool accidentally. Store idle power tools out of the
reach of children and do not allow persons unfamiliar with the power tool
or these instructions to operate the power tool. power tool are danger-
ous in the hands of untrained users.
Maintain power tools. Check for misalignment or binding of moving
parts, breakage of parts and any other condition that may affect the
power tool’s operation. If damaged, have the power tool repaired before
use. Many accidents are caused by poorly maintained power tools.
Keep cutting tools sharp and clean. Properly maintained cutting tools
with sharp cutting edges are less likely to bind and are easier to control.
Use the power tool, accessories and tool bits etc. in accordance with
these instruction, taking into account the working conditions and the
work to be performed. Use of the power tool for operations different from
those intended could result in a hazardous situation.
BATTERY TOOL USE AND CARE
Recharge only with the charger specied by the manufacturer. A
charger that is suitable for one type of battery pack may create a risk
of re when used with another battery pack. Use power tools only

CORDLESS SCREWDRIVER
6
with specically designated battery packs. Use of any other battery
packs may create a risk of injury and re.
When battery pack is not in use, keep it away from other metal objects
like paper clips, coins, keys, nails, screws, or other small metal objects
that can make a connection from one terminal to another.
Shorting the battery terminals together may cause burns or a re.
Under abusive conditions, liquid may be ejected from the battery, avoid
contact. If contact accidentally occurs, ush with water. If liquid contacts
eyes, additionally seek medical help. Liquid ejected from the battery
may cause irritation or burns.
SERVICE
Have your power tool serviced by a qualied repair person using only
identical replacement parts. This will ensure that the safety of the power
tool is maintained.
SAFETY RULES FOR CORDLESS SCREWDRIVERS
Hold power tools by insulated gripping surfaces when performing an
operation where the cutting tools may contact hidden wring. Contact
with a “live” wire will make exposed metal parts of the tool “live” and
shock the operator.
Use clamps or other practical way to secure and support the workpiece
to a stable platform.

USER MANUAL 7
Holding the work by hand or against your body leaves it unstable and
may lead to loss of control.
Do not drill, fasten or break into existing wall or other blind areas where
electrical wiring may exist. If this situation is unavoidable, disconnect all
fuses or circuit breakers feeding this worksite.
Battery tools are always in an operative condition. Be aware of the pos-
sible hazards. Always wear safety goggles or eye protection when using
this tool.
Secure the workpiece, never hold it in your hand or across legs. The
drilling action may cause you to lose control of the workpiece and injury
may occur.
When installing a bit, insert the shank of the bit well within the collet. If
the bit is not inserted deep enough, the grip of the collet over the bit is
reduced and the loss of control is increased.
Do not run the tool while carrying it at your side. A spinning bit could
become entangled with clothing and injury may result.
Do not use dull or damaged bits and accessories. Dull or damaged bits
have a greater tendency to bind in the workpiece.
WARNING!
Some dust created by power sanding, sawing, grinding, drilling,
and other construction activities contains chemicals known to cause
cancer, birth defects or other reproductive harm. Some examples of

CORDLESS SCREWDRIVER
8
these chemicals are:
- Lead from lead-based paints,
- Crystalline silica from bricks and cement
And other masonry products, and
- Arsenic and chromium from chemically-treated lumber.
Your risk from these exposures varies, depending on how often you do this
type of work. To reduce your exposure to these chemicals: work in a well
ventilated area, and work with approved safety equipment, such as those
dust masks that are specially designed to lter out microscopic particles.
BATTERY/ CHARGER
Before using battery charger, read all instructions and cautionary markings
on battery charger, battery pack, and product using battery.
Do not disassemble charger or operate the charger if it has received a
sharp blow, been dropped or otherwise damaged in any way.
Replace damaged cord or plugs immediately. Incorrect reassembly or
damage may result in electric shock or re.
Do not rechiarge battery in damp or wet environment. Do not expose
charger to rain or snow. If battery case is cracked or otherwise damaged,

USER MANUAL 9
do not insert into charger. Battery short or re may result.
Charge battery pack in temperatures above +32 degrees F (0 degrees C)
and below +113 degrees F (45 degrees C). store tool and battery pack in
locations where temperatures will not exceed 120 degrees F (49 degrees
C). This is important to prevent serious damage to the battery cells.
Place charger on at non-ammable surfaces and away from ammable
materials when re-charging battery pack.
The charger and battery pack heat during charging. Carpeting and other
heat insulating surfaces block proper air circulation which may cause
overheating of the charger and battery pack. If smoke or melting of the
case are observed unplug the charger immediately and do not use the
battery pack or charger.
Use of an attachment not recommended or sold by skil may result in a
risk of re, electric shock or injury to persons.
BATTERY CARE
WARNING!
When batteries are not in tool or charger, keep them away from metal
objects. For example, to protect terminals from shorting DO NOT place
batteries in a tool box or pocket with nails, screws, keys, etc. Fire or
injury may result. DO NOT PUT BATTERIES INTO FIRE OR EXPOSE
TO HIGH HEAT. They may explode.