Room to grow Jub140 User manual

2115 mm

1015mm

1000 mm

Version 191106JUB140/JUB141IMPORTANT - READ CAREFULLY - RETAINFOR FUTURE REFERENCE Jubilee Captain’s BedAssembly Instructions

Customer Service(01943 660760)02

HARDWARE Gx12(ø1/4x110)Hx4(ø7x60)Ix12(ø1/4)Jx12(ø3,5x14)Kx40(ø3,5x14)Lx18(ø4x30)Ax78(ø8x30)Bx4(ø8x50)Cx8(ø10x30)Dx24(ø10x40)Ex36(ø5x12)Fx36(ø15x11)Mx14(ø4x35)Nx28(ø4x35)Ox8(ø4x40)Px8(ø4,5x50)Qx6(ø4,5x60)Rx6(M4x25)Sx2(M4x30)Tx4Ux4Vx6Xx4Wx8Zx12A1x1B1x2Yx803

PARTS5677113333434141410111091212999112151617161716181818181919202324212225882604

IMPORTANT INFORMATION

Maximum heightof mattress

IMPORTANT: These labels are not to beremoved for safety reasons. Removing thelabel may cause damage to the paint nish.05WARNING – Do not use this child’s bed if any part is broken, torn or missing.It is recommended that you always follow the manufacturer’s instructions to assemble this product.Children are likely to play, bounce, jump and climb on beds, therefore the child’s bed should not be placed too close to other furniture or windows, blind cords, curtain pulls or other strings or cords and should be placed either tight to the wall or have a gap of 300mm between the wall and the side of the bed.It is necessary to frequently ventilate the room in order to keep the humidity low and to prevent mould in and around the bed.This item conforms to British Safety Standards – BS8509:2018 + A1:2011.IMPORTANT: These labels are not to be removed for safety reasons. Removing the label may cause damage to the paint nish.

CERTIFICATION LABELJUBILEE CAPTAINS BED

Produced for : RTG (Ilkley) Ltd97-99 Pegholme,Wharfebank Mills,Oley, LS21 3JP Date of Manufacture: August 2019Factory ID: Manufactured in BrazilProduct code : JUB 140 / JUB 141

WARNING : This bed is not suitable for children under 4 years

THIS LABEL IS NOT TO BE REMOVED

This bed model has been tested by an independent laboratory and it is in compliance with Standard Consumer Safety Speciﬁcation For Bunk Beds & High Beds & BS8509:2008+A1:2011 - Standard Consumer Safety Speciﬁcation For Junior Beds.

Please take the time to carefully read through the whole of these instructions before youcommence.Keep these instructions for future reference.Unpack, inspect and check off all of the contents.Please dispose of all packaging safely.Small component parts could choke a child if swallowed.We strongly recommend that you keep children well away from the work area.It would be sensible to lay a sheet or blanket on the oor where you intend to work toavoid scratching this product and to protect your oor.This product is heavy. Take extreme care when lifting to avoid personal injury or damage to the product.Assemble the product as close to it’s intended nal position in the room as possible.Please check the contents of boxes before attempting to assemble this product. A fullchecklist of parts and ttings is given in page 3 of this instruction leaet.HANDY HINT: If you keep the hardware in a bowl during assembly you will be lesslikely to lose them.We strongly urge that you do not use Power Tools, such as drills or electric screwdrivers during this assembly as this could cause irreparable damage to your product and willinvalidate the warranty.

2055 mm

2:00 h06