ROOMS TO GO MONTANA 2.0 MNT2-10-48 User manual

11"
8 1
2
"
M O N T A N A 2 . 0
T W I N / T W I N LADDER B U N K B E D
FULL / FULL LADDER B U N K B E D
Use only correct mattress dimensions and Bunkie board:
Twin size - 74" - 75" long and 37-1/2"-38-1/2" wide
Full size - 74" - 75" long and 52-1/2"-53-1/2" wide
Futon size - 75” long and 53” wide
MONTANA 2.0 - MONTANA ESPRESSO - PACKAGE# 3601480P
MONTANA 2.0 - MONTANA DRIFTWOOD - PACKAGE#3601482P
RTG SKU# STYLE# ITEM DESCRIPTION RTG SKU# STYLE# ITEM DESCRIPTION
35414802
35514804
35614806
36214803
MNT2-13-48
MNT2-14-48
MNT2-15-48
MNT2-25-48
35414826
36214827
35614820
35514828
MNT2-25-39N
MNT2-15-39N
MNT2-14-39N
MNT2-13-39N
UPPER FULL HB & FB
LOWER FULL HB & FB
RAILS W/ FULL SLATS
LADDER
UPPER FULL HB & FB
LOWER FULL HB & FB
RAILS W/ FULL SLATS
LADDER
PLEASE CONTACT YOUR RETAIL STORE WITH SERVICE OR PARTS REPLACEMENT REQUEST
Version #1 - 2/10/2021 Page #1
MONTANA 2.0 - MONTANA ESPRESSO - PACKAGE#3591480P
LADDER
RAILS W/ TWIN SLATS
LOWER TWIN HB & FB
UPPER TWIN HB & FB
LADDER
RAILS W/ TWIN SLATS
LOWER TWIN HB & FB
UPPER TWIN HB & FB
MNT2-10-39N
MNT2-11-39N
MNT2-12-39N
MNT2-25-39N
35514822
35614824
36214827
35414820
MNT2-25-48
MNT2-12-48
MNT2-11-48
MNT2-10-48
36214803
35614800
35514808
35414806
ITEM DESCRIPTION STYLE# RTG SKU# ITEM DESCRIPTION STYLE# RTG SKU#
MONTANA 2.0 - MONTANA DRIFTWOOD - PACKAGE#3591482P

MATTRESS AND BUNKIE BOARD CHART
MONTANA
ESPRESSO
Version #1 - 02/10/2021 Page #2
PACKAGE DESCRIPTION TOP BED BOTTOM BED
3591480P
3601480P
Twin/Twin Bunk Bed
Twin/Twin Bunk Bed
MONTANA
DRIFTWOOD
3591482P
MONTANA
ESPRESSO
MONTANA
DRIFTWOOD
3601482P
Full/Full Bunk Bed
Twin Mattress
Twin Bunkie board required
Twin Mattress
Twin Bunkie board required
Full Mattress
Full Bunkie board required
Full Mattress
Full Bunkie board required
Twin Mattress
Twin Bunkie board required
Twin Mattress
Twin Bunkie board required
Full Mattress
Full Bunkie board required
Full Mattress
Full Bunkie board required
Use only correct mattress dimensions and Bunkie board:
Twin size mattress- 74” - 75” long and 37-1/2”-38-1/2” wide
Twin size Bunkie board- 74” long and 37-1/2” wide
Full size mattress- 74” - 75” long and 52-1/2”-53-1/2” wide
Full size Bunkie board- 74” long and 54” wide
Futon size mattress - 75” long and 53” wide
Page #2 Version #1 - 10/14/2020
Full/Full Bunk Bed

Version #1 - 02/10/2021 Page #3
• Read all instructions before assembling bunk bed and keep these instructions for future reference.
• Before each usage or assembly, inspect bunk bed for damaged hardware, loose joints,
missing parts, or sharp edges. DO NOT use bunk bed if any parts are missing or broken.
• DO NOT use substitute parts. Contact your local Rooms To Go or visit www.ROOMSTOGO.com for
replacement parts and instructional literature if needed.
• Follow the information on the warnings appearing on the upper bunk end structure and on the carton.
DO NOT REMOVE WARNING LABEL FROM BED.
• Always use the recommended size mattresses or mattress supports, or both, to help prevent the
likelihood of entrapment or falls.
• Ensure thickness of mattress and foundation combined does not exceed 10" and mattress surface
is at least 5 inches (127mm) below upper edge of guardrails for upper bunk.
• Do not allow children under 6 years of age to use the upper bunk.
• Periodically check and ensure that the guardrail, ladder, and other components are in their proper
position, free from damage, and that all connectors are tight.
• Do not allow horseplay on or under the bed and prohibit jumping on the bed.
• Limit top bunk use to one person.
• Always use the ladder for entering and leaving the upper bunk.
• Use of a night light may provide added safety precaution for a child using the upper bunk.
• Always use guardrails on both long sides of the upper bunk. If the bunk bed will be placed next to
the wall, the guardrail that runs the full length of the bed should be placed against the wall to
prevent entrapment between the bed and wall.
• The use of water or sleep flotation mattresses is prohibited.
• This bunk bed meets the requirements of ASTM 1427-19.
STRANGULATION HAZARD:
Never attach or hang items to any part of the bunk bed that are not designed for
use with the bed; for example, but not limited to, hooks, belts and jump ropes.
WARNING DANGER:
Failure to follow these warnings and assembly
instructions could result in serious injury or death. To help
prevent serious or fatal injuries from entrapment or falls:

11"
8 1
2
"
P r e - A s s e m b l y
PLEASE CONTACT YOUR RETAIL STORE WITH SERVICE OR PARTS REPLACEMENT REQUEST
Version #1 - 02/10/2021 Page #4
Warning:
The bed slats included with this bed will not support a mattress alone, this bed
requires Bunkie boards (sold separately).
Read all the instructions, identify all components, choose your
configuration, and be sure you have all parts prior to assembly.
Tools Needed
Phillips heads screwdriver (not included)
5mm allen wrench (included)
MAKE SURE ALL BOLTS ARE TIGHTENED COMPLETELY
CARE INSTRUCTIONS:
Dust with a clean, soft cloth. Avoid the use of all abrasive cleaners.

11"
SLAT
RAIL HB/FB
GUARDRAIL HB/FB
TOP HB/FB
LOWER HB/FB
TOP HB/FB
LOWER HB/FB
TOP HB/FB
LADDER
Version #1 - 2/10/2021 Page #5
A
B
C
D
E
J
I
H
G
F
METAL PIN
04
#6 x 1 1/2" SCREW
16
CAP NUT
1/4" -20x30mm BOLT
21
23
1/4" -20x50mm BOLT
06
ALLEN KEY
02
METAL DOWEL
01
P A R T S L I S T
01
METAL DOWEL
02
ALLEN KEY
06
1/4" -20x50mm BOLT
23
21
1/4" -20x30mm BOLT
CAP NUT
16
#6 x 1 1/2" SCREW
04
METAL PIN
F
G
E
D
C
B
A
02
ALLEN KEY
04
1/4" -20x50mm BOLT
16
20
1/4" -20x30mm BOLT
CAP NUT
16
#6 x 1 1/2" SCREW
04
METAL PIN
F
E
D
C
B
A 01
LOCATED
LOCATED
LOCATED IN RAILS W/ SLATS BOX LOCATED IN LADDER BOX
#6 x 3/4" SCREW
G

11"
Version #1 - 02/10/2021 Page #6
A S S E M B L Y I N S T R U C T I O N S
(DO NOT TIGHTEN COMPLETELY UNTIL ALL PIECES ARE CONNECTED TOGETHER)
FIRST DETERMINE THE CONFIGURATION THAT FITS YOUR ROOM

11"
C
C
C
C
C
D
D
D
D
D
D
D
C
C
E
B
B
B
B
B
B
B
B
BB
Version #1 - 02/10/2021 Page #7
(DO NOT TIGHTEN COMPLETELY UNTIL ALL PIECES ARA CONNECTED TOGETHER)
STEP
1
ASSEMBLE BOTTOM BED
D
C
F
D
C
INSERT METAL DOWEL PINS
A
2
STEP
A
STEP
3
STEP
4
STEP
5
STEP
6
PLACE TOP BED IN POSITION ASSEMBLE TOP BED
C
F
D
SECURE GUARDRAIL
C
E
F
B
A
A
C
C
B
C
B
B
B
B
B
A
A
A
CC
C
D
C
C
E
E
E
C
C
C
C
C
C
C
C
D
D
D
D
DD
D
D
NOTE: Ensure the correct face is
toward the bed(See label).
NOTE: Ensure the correct face is
toward the bed(See label).

11"
C
BUNKIE BOARD
BUNKIE BOARD
BUNKIE BOARD
BUNKIE BOARD
D
C
C
C
C
C
D
D
D
D
Version #1 - 02/10/2021 Page #8
STEP
78
STEP
SECURE LADDER TO BUNKBED
C
PLACE BUNKIE BOARD (REQUIRED, SOLD SEPARATELY) ON TOP OF THE SLATS.
G
G