ROSE DISPLAYS 18" Stacking Bin User manual

1
Systems
Bulk Merchandising
18” Stacking Bins
© 2022 Visual Creations, inc. | Rose Displays drawings, images, renderings, representation, ideas, and disclosures
contained in this document are the exclusive property of Visual Creations, Inc. All rights reserved
(3) Bottom Sides
A
(6) Upper Sides
B
(3) Bin Floors
C
(4) sku tag holder
D
Graphic wrap kit
E
P1
*Before beginning assembly, please locate and ID all parts listed for assembly
Parts Included Optional
Start with the (3) bent tube
sides (shown). Insert the (2)
hook wire ends into the (2)
corresponding sleeves on the
adjacent side. *
Repeat this
step to form the third side of
the bin. *Press together to be
sure the connection is secure.
Next, repeat the side
assembly using the sides
with the swedged tubing
(as s
hown below). Press the
sides together to engage
firmly. *Be sure to assemble
the sides with the plastic caps
as a set (together they form
the top tier of the display).
2 3
Insert the round wire bin
bottom into the assembled
bin, pushing it down until it
rests on the (3) loop wires.
Bottom Tier
(plastic caps)
swedged ends
500 Narragansett Park Drive Pawtucket, RI 02861 | 1-877-518-5156 | www.rosedisplays.com | [e-mail]

4 5
P2
Completed assembly shown
Locate the SKU tags
where desired. Fold
clip around the top
bin wire and snap it
closed. Insert the
SKU labels into
track features to
complete the
installation
Place the bottom tier on
the floor, then insert the
swedged ends of the
next tier into the tops of
the tubes. Press the tier
down to firmly engage it
onto the tier below.
Depress the snap
buttons to secure each
tier in position Repeat
this step for the top tier
as well. *The tier with the
plastic caps in the ends
will be the top
Be sure all tiers are
level and the snap
buttons are firmly
engaged before
completing this step
6
NOTE: To watch a video of this installation,
please visit the following web link:
https://youtu.be/BhPWUujHYCI
If you have any questions or concearns with this display, please call
1-877-518-5156 and referance ROS-151
Optional Graphic Wrap Kit
Channels snap
onto end wires,
graphics flex
into channels to
secure in place
Graphic channels
.024” thk flex graphic
PLASTIC CAPS
IN TOP OF TUBES
SNAP
BUTTONS
PLASTIC CAPS
IN BOTTOM OF TUBES
Insert the wire bin bottom
into the assembled tiers
pressing down until it
rests on the (3) loop wires.
© 2022 Visual Creations, inc. | Rose Displays drawings, images, renderings, representation, ideas, and disclosures
contained in this document are the exclusive property of Visual Creations, Inc. All rights reserved
500 Narragansett Park Drive Pawtucket, RI 02861 | 1-877-518-5156 | www.rosedisplays.com | [e-mail]

1
Systems
Bulk Merchandising
12” Stacking Bins
(3) Bottom Sides
A
(6) Upper Sides
B
(3) Bin Floors
C
(4) sku tag holder
D
Graphic wrap kit
D
P1
*Before You begin assembly, please locate and ID all parts listed for assembly
Parts Included Optional
Insert the round wire bin
bottom into the assembled
bin, pushing it down until it
rests on the (3) loop wires.
2 3
Start with the (3) bent tube
sides (shown). Insert the (2)
hook wire ends into the (2)
corresponding sleeves on the
adjacent side. *
Repeat this
step to form the third side of
the bin. *Press together to be
sure the connection is secure.
Next, repeat the side
assembly using the sides
with the swedged tubing
(as s
hown below). Press the
sides together to engage
firmly. *Be sure to assemble
the sides with the plastic caps
as a set (together they form
the top tier of the display).
Bottom Tier
(bent tubes) swedged ends
© 2022 Visual Creations, inc. | Rose Displays drawings, images, renderings, representation, ideas, and disclosures
contained in this document are the exclusive property of Visual Creations, Inc. All rights reserved
500 Narragansett Park Drive Pawtucket, RI 02861 | 1-877-518-5156 | www.rosedisplays.com | [e-mail]

4 5
P2
500 Narragansett Park Drive Pawtucket, RI 02861 | 1-877-518-5156 | www.rosedisplays.com | [e-mail]
Completed assembly shown
Insert the wire bin bottom
into the assembled tiers
pressing down until it
rests on the (3) loop wires.
Locate the SKU tags
where desired. Fold
clip around the top
bin wire and snap it
closed. Insert the
SKU labels into
track features to
complete the
installation
Place the bottom tier
on the floor, then
insert the swedged
ends of the next tier
into the tops of the
tubes. Press the tier
down to firmly
engage it onto the tier
below. Repeat this
step for the top tier as
well. *The tier with the
plastic caps in the ends
will be the top
Be sure all tiers are
level and firmly
engaged before
completing this step
PLASTIC CAPS
IN TOP OF TUBES
6
NOTE: To watch a video of this installation,
please visit the following web link:
https://youtu.be/BhPWUujHYCI
If you have any questions or concearns with this display, please call
1-877-518-5156 and referance ROS-152
Optional Graphic Wrap Kit
Channels snap
onto end wires,
graphics flex
into channels to
secure in place
Graphic channels
.024” thk flex graphic
© 2022 Visual Creations, inc. | Rose Displays drawings, images, renderings, representation, ideas, and disclosures
contained in this document are the exclusive property of Visual Creations, Inc. All rights reserved
500 Narragansett Park Drive Pawtucket, RI 02861 | 1-877-518-5156 | www.rosedisplays.com | [e-mail]