Rosetta KODAH User manual

KODAH
www.rosettahardscapes.com
FIRE PIT KIT
*Shown with gas insert upgrade

FEATURES:
• Modern, linear proportions
• Freshly quarried stone texture
compliments a variety of applications
• Fast installation with large blocks and
perfectly planned kits
• Kit consists of 16 blocks and heavy-duty
14-gauge steel fire ring
www.rosettahardscapes.com
51"
12"
+/- 51"
+/- 30"
ABUT MATCHING
BLOCK TAPERS
TYPICAL COURSE
(PLAN VIEW)
DRAWN BY:
DRAWING FILE:SHEET NO. :
DATE:
05481 US 31 SOUTH CHARLEVOIX, MI 49720
877-777-6558 ● 231-237-9656 Fax ● www.rosettahardscapes.com
TITLE:
KODAH FIRE PIT
TYPICAL CONSTRUCTION DETAILS
KODAH FIRE PIT CONSTRUCTION DETAILS.dwg
B CONKLIN
1 OF 1
MAR 20, 2017
TYPICAL CONSTRUCTION
(ISOMETRIC VIEW)
6" MIN. BASE
28"
OPENING
KODAH FIRE PIT
INSTALLATION INSTRUCTIONS
Thank you for choosing Rosetta Hardscapes products. The
following are some helpful instructions to make your fire pit
installation go smoothly. For in-depth technical information, see
the Rosetta Technical Guide (available at rosettahardscapes.com)
or contact technical support at [phone] ext 3010.
Your safety is important to us. Please follow OSHA guidelines, and
utilize safety-toe boots, hardhats, gloves and eye, ear &
respiratory protection whenever appropriate.
REQUIRED TOOLS:
·Shovel
·Level
·Tape Measure
·Compaction Equipment
INSTALLATION INSTRUCTIONS:
1. Familiarize yourself with the construction details shown this
sheet.
2. Mark out a 5-ft x 5-ft square at the location for your fire pit.
3. Excavate for drain stone base (min. 6").
4. Fill excavation with drain stone. Level and compact the stone.
5. Place blocks per the construction details shown on this sheet.
Ensure that the base course is level before stacking the
second course. (The use of polyurethane concrete adhesive
between courses is optional.)
6. Once the blocks are placed, set the steel liner in the center of
the fire pit, with the lip resting directly atop the block.
7. Add additional drain stone to the center of the fire pit until the
stone covers the bottom (1) inch of the steel liner. This will
secure the liner in place.
WARNING! Do not place the fire pit directly atop a patio surface.
Instead, the fire pit should be "cut in" to the patio surface to avoid
damage to the patio caused by conductive heat transfer.
KODAH
FIRE PIT KIT
INSTALLATION INSTRUCTIONS:
1. Familiarize yourself with the construction details shown in this sheet.
2. Mark out a 5-ft x 5-ft square at the location for your fire pit.
3. Excavate for drain stone base (min. 6”).
4. Fill excavation with drain stone. Level and compact the stone.
5. Place blocks per the construction details shown on this sheet. Ensure that the base course is level before
stacking the second course. (The use of polyurethane concrete adhesive between courses is optional.)
6. Once the blocks are placed, set the steel liner in the center of the fire pit, with the lip resting directly atop
the block.
7. Add additional drain stone to the center of the fire pit until the stone covers the bottom (1) inch of the
steel liner. This will secure the liner in place.
WARNING! Do not place the fire pit directly atop a patio surface. Instead, the fire pit should be “cut in” to
the patio surface to avoid damage to the patio caused by conductive heat transfer.
51"
12"
+/- 51"
+/- 30"
ABUT MATCHING
BLOCK TAPERS
TYPICAL COURSE
(PLAN VIEW)
DRAWN BY:
DRAWING FILE:SHEET NO. :
DATE:
05481 US 31 SOUTH CHARLEVOIX, MI 49720
877-777-6558 ● 231-237-9656 Fax ● www.rosettahardscapes.com
TITLE:
KODAH FIRE PIT
TYPICAL CONSTRUCTION DETAILS
KODAH FIRE PIT CONSTRUCTION DETAILS.dwg
B CONKLIN
1 OF 1
MAR 20, 2017
TYPICAL CONSTRUCTION
(ISOMETRIC VIEW)
6" MIN. BASE
28"
OPENING
KODAH FIRE PIT
INSTALLATION INSTRUCTIONS
Thank you for choosing Rosetta Hardscapes products. The
following are some helpful instructions to make your fire pit
installation go smoothly. For in-depth technical information, see
the Rosetta Technical Guide (available at rosettahardscapes.com)
or contact technical support at [phone] ext 3010.
Your safety is important to us. Please follow OSHA guidelines, and
utilize safety-toe boots, hardhats, gloves and eye, ear &
respiratory protection whenever appropriate.
REQUIRED TOOLS:
·Shovel
·Level
·Tape Measure
·Compaction Equipment
INSTALLATION INSTRUCTIONS:
1. Familiarize yourself with the construction details shown this
sheet.
2. Mark out a 5-ft x 5-ft square at the location for your fire pit.
3. Excavate for drain stone base (min. 6").
4. Fill excavation with drain stone. Level and compact the stone.
5. Place blocks per the construction details shown on this sheet.
Ensure that the base course is level before stacking the
second course. (The use of polyurethane concrete adhesive
between courses is optional.)
6. Once the blocks are placed, set the steel liner in the center of
the fire pit, with the lip resting directly atop the block.
7. Add additional drain stone to the center of the fire pit until the
stone covers the bottom (1) inch of the steel liner. This will
secure the liner in place.
WARNING! Do not place the fire pit directly atop a patio surface.
Instead, the fire pit should be "cut in" to the patio surface to avoid
damage to the patio caused by conductive heat transfer.