Rosewill RSV-S4-6G User manual

4 Bay eSATA RAID 0/1/10/5/JBOD SUB SYSTEM
w/ 6G PCIe Card
RSV-S4-6G
Quick Installation Guide
Thank you for purchasing a quality Rosewill Product.
Please register your product at : www.rosewill.com for
complete warranty information and future support for your product.

4 Bay eSATA RAID 0/1/10/5/JBOD SUB SYSTEM w/ 6G PCIe Card RSV-S4-6G QIG
Package Contents for RSV-S4-6G
Item Quantity
RSV-S4-6G 1
Power cord 1
eSATA cable 1
2-port eSATA PCIe Adapter 1
Screws Set 1
Quick Installation Guide 1
CD Manual 1
* Please contact Rosewill customer service in case of anything
missing
LED Indicators
1. Power LED - Lights when unit is
powered on.
2. PC Link LED - Lights when unit
is connected to computer.
3. HDD LEDs - Green: HDD is
installed. Orange: HDD is being
accessed.
Hard Drive Installation
1. Remove the tool-less screws on the back panel.
2. Remove the upper chassis cover backwards and lift it upward.
3. Open the front panel and install the HDD from the top to bottom.
1

4 Bay eSATA RAID 0/1/10/5/JBOD SUB SYSTEM w/ 6G PCIe Card RSV-S4-6G QIG
4. Fasten the tool-less screws to secure the HDD.
5. Close the front panel and the chassis cover, and fasten the tool-less screws on the
back panel.
Hardware Connection Diagram
Installing the PCIe Adapter Card to a Computer
Insert the PCIe Card into an available
PCIe Slot on your computer (Step 1) and
secure with screw (Step 2).
2

4 Bay eSATA RAID 0/1/10/5/JBOD SUB SYSTEM w/ 6G PCIe Card RSV-S4-6G QIG
Windows System Installation
Step 1
From your desktop, point the cursor at “My Computer”, right click
and select “Manage”.
Step 2
Right click on “Mass Storage Controller” and select “Update
Driver”.
Step 3
Select “Manual Setup (Recommended Selection)”, specify driver
from CD-Rom.
Step 4
3

4 Bay eSATA RAID 0/1/10/5/JBOD SUB SYSTEM w/ 6G PCIe Card RSV-S4-6G QIG
Select the driver and begin installation process. After SATA card
installation is completed, it will be ready for use.
RAID Mode Setup and Diagrams
To setup RAID mode, please insert the included CD into the computer and install the SATA RAID
Utility. Follow the installation guide in the Detailed Manual to fully setup the desired RAID mode.
4