Rosewill RNWA-PoE-4065 User manual

1
RNWA-PoE-4065
Thank you for purchasing a Rosewill PoE Injector.
Please read the instruction manual before use and retain for future reference.
DEVICE LAYOUT
LED Indicator
PWR
Green
Green On Ultra PoE Injector is on.
Ultra PoE Injector is off.
PoE function is enabled.
PoE function is disabled.
Off
On
Off
Color Status Operation
PoE
(1-4)
LED INDICATORS
321 4
DATA IN
32 1
4
1
2
3 4
PoE
PWR
DATA + PWR OUT
DC POWER

2
FCC STATEMENT
This device has been tested and found to comply with limits
for a Class A digital device, pursuant to Part 15 of FCC Rules.
These limits are designed to provide reasonable protection
against harmful interference when the equipment is operated
in a commercial environment. This equipment generates and
radiates radio frequency energy and, if not installed and used
in accordance with the user manual, may cause interference
in which case users will be required to correct interference at
their own expense.
CE MARK WARNING
This is a Class A product. In a domestic environment, this
product may cause radio interference, in which case the user
may be required to take adequate measures.
• 1 x RNWA-PoE-4065, 4-Port Gigabit Power over Ethernet (PoE) Injector Hub
• 1 x 65 Watts Power Adapter
• 1 x Power Cord
• 1 x User Manual
• 4 x Rubber Feet
PACKAGE CONTENTS
HARDWARE INSTALLATION
1. Plug the power cord into the device and the other end into an electrical
outlet.“PWR” LED will be on.
2. Connect the RJ45 cable from the “Data In” port on the Injector Hub to
the Ethernet port of your switch.
3. Connect your IEEE 802.3af/at compliant Powered Devices (PD) to the
“PoE Out” port on the Injector Hub with suitable network cable. The
device will automatically supply power to remote PD. Now, “PoE” LED
indicators will be on.
4. Ensure the PDs are on and all Ethernet cables are connected correctly
and tightly.

3
APPLICATION DIAGRAM
GROUNDING (RECOMMENDED)
RNWA-PoE-4065 provides ancillary grounding to enhance electrostatic
discharge (ESD) protection.
1. Loosen the ground screw and secure a ground wire (not included) to
the grounding point.
2. Secure the other end of the ground wire to a grounding block or other
grounded structure.
Power
Network Switch
100 m
PoE Device
+
PoE Injector
= Data = Power
3
2
1
4
3
2
1
4

Note: If you connect to a legacy device that is not PoE compatible,RNWA-
PoE-4065 will not deliver power to the legacy device.This feature
allows you to freely and safely mix legacy and PoE compatible devices
on your network.
RNWA-PoE-4065_A
Technical Support Information [email protected] 1-800-575-9885
Please register your product at www.rosewill.com for complete warranty information and support for your product.
PRODUCT SPECIFICATIONS
Weight
Standard Compliance
PoE Power Supply Type
Interface
PoE Power Output
Total Power Consumption
Power Requirement
LED Indicators
Dimensions
Operating Environment
Endspan, 1/2(+), 3/6(-)
Data In Ports / PoE Out Ports
4 x 10/100/1000BASE-T RJ45 Auto-MDI/MDI-X Ports
4 x 10/100/1000BASE-T RJ45 Auto-MDI/MDI-X Ports
Per Port 56VDC, Max. 30 Watts
65 Watts
56VDC External Power Adapter
1 x PWR LED
4 x PoE LEDs
120 x 78 x 32 mm (4.72 x 3.07 x 1.26 in)
Operating: 0°C to 40°C (32°F to 104°F)
Storage: -20°C to 70°C (-4°F to 158°F)
Humidity: 20 to 95% (Non-Condensing)
IEEE 802.3 10BASE-T
IEEE 802.3u 100BASE-TX
IEEE 802.3ab 1000BASE-T
IEEE 802.3af/at Power over Ethernet
280g (9.88oz)