Rosslare MD-08B User manual

MD-08B
Programming Interface for Smartcard Readers
Installation and User Manual
1
1. Introduction
The Rosslare's MD-08B MIFARE®Reader Programmer is used to set the
Wiegand output format of MIFARE read-only readers, while setting the
input control of the reader to either buzzer or LED control.
Figure 1: MD-08B
2. Technical Specifications
Electrical Characteristics
Operating Voltage 12 VDC
Input Current 500 mA
Cable RS-232 serial cable
Data Specifications
Reader AY-M25, AY-W6350, AY-W6250, AY-K25,
AY-H25, AY-Q6250, and AY-Q6350
Software Requirements
Programmer Application MIFARE Reader v0.05.00
3. Connections
3.1 Connecting the MD-08B to the
Computer
Connect the MD-08B to a COM port in the computer using the RS-232
cable.
3.2 Connecting the Reader to the MD-08B
Connect the reader to the MD-08B according to the following wiring:
Red to +12V
Black to (-)
Green to D0
White to D1
If the reader comes with a Molex connector, connect it to JP4.
4. Software Application
4.1 Starting the Software
1. Connect the reader to the MD-08B.
2. Run the MIFARE Reader Programmer application.
The
Mifare Reader Programmer window opens (Figure 2):
Figure 2: The Mifare Reader Programmer
3. In Communication Settings, set Com Port to the port that the
MD-08B is connected to.
4.2 Setting Rosslare Mifare® Reader's
Transmission Format and LED Control
Input
1. In Program options, set the parameters that you want to change in
the reader. For example, you can set Transmit format to
Wiegand 32-bit, and LED control input to Green LED.
2. Disconnect the MD-08B from the power.
3. Click the Program button to set the reader.
4. Reconnect the MD-08B to the power by connecting the Power
plug.
If the programming was successful, the
Finish window opens
(Figure 3).
Figure 3: Finish Window

2
Limited Warranty
The full ROSSLARE Limited Warranty Statement is available in the Quick
Links section on the ROSSLARE website at www.rosslaresecurity.com.
Rosslare considers any use of this product as agreement to the
Warranty Terms even if you do not review them.
Contact Information
United States and Canada
Rosslare Security Products, Inc.
Southlake, TX, USA
Toll Free: [phone]
Local: [phone]
Fax: [phone]
[e-mail]
Europe
Rosslare Israel Ltd.
Rosh HaAyin, Israel
Tel: [phone]
Fax: [phone]
[e-mail]
Latin America
Rosslare Latin America
Buenos Aires, Argentina
Tel: [phone]
[e-mail]
China
Rosslare Electronics (Shenzhen) Ltd.
Shenzhen, China
Tel: [phone]
Fax: [phone]
[e-mail]
Asia Pacific, Middle East, Africa
Rosslare Enterprises Ltd.
Kowloon Bay, Hong Kong
Tel: [phone]
Fax: [phone]
[e-mail]
India
Rosslare Electronics India Pvt Ltd.
Tel/Fax: [phone]
Mobile: [phone]
[e-mail]
www.rosslaresecurity.com
0706-0960184+02